stillen supercharger to vsr top mounted turbo

Dzel · 07-12-2013, 05:22 PM

Nice numbers for only 8psi. Congrats!

Sent with TapAhoe

regulator11 · 07-12-2013, 09:01 PM

Thanks. They felt safe at 10 but I was happy at 8

Nissan370 · 07-13-2013, 10:47 PM

Vsr should get the car on Monday
Bobby is going to install the kit for dam near free because of the wait and problem i have been having real cool guy.

Nissan370 · 07-28-2013, 08:00 PM

Ok the car is done and a very safe tune was added by vsr

I made a little less hp do to my lower compression but thats fine

523 /460@ the wheel at 10 psi with just 17 deg. Of timming

Thats up from 436/340 at 9psi on the stillen

Also looks like max boost is about 3800 rpms

Once i get the car and dyno back I will post the sheet

FireDan50 · 07-28-2013, 08:06 PM

Nice. Yours is the Black Z right? Did you get your car back?

Nissan370 · 07-28-2013, 08:11 PM

Not yet was going to fly down and drive back but cant get off work so I will be shipped to me some time this week

Nissan370 · 07-28-2013, 08:14 PM

So time to clean up the stillen kit and put it up for sale

FireDan50 · 07-28-2013, 08:22 PM

LoL I'm in the same boat as you. My white 370z had the Stillen kit but is at VSR now getting all that yanked out for their single turbo setup. I'm supposed to be flying down there hopefully this week to drive back

There's not a lot of info/reviews on this here so I plan on doing a lot of photos, videos, and write-ups as soon as I can, just to help others out.

Nissan370 · 07-28-2013, 08:51 PM

Same here once I get it back videos and pictures bobby put up a small video on his facebook page of the dyno

elperuano · 07-28-2013, 10:29 PM

That's great numbers for a safe conservative tune and 10 lbs. of boost.
Curious why did you stop at 10lbs? You're built motor and meth still correct? You barely scratching the surface of what that motor plus meth could really handle. Should try a high boost and low boost setting. Cmon doooeeeettttt!!

roplusbee · 07-29-2013, 12:14 AM

Nissan370 · 07-29-2013, 05:35 AM

ha ha ha remember elperuano your the reason i pulled the trigger on the turbo kit when you keep getting on me for having a stillen and a build motor lol
anyways ya i did wimp out some i just wanted the kit on and working and i cant afford any and i mean any problems to pop up as i am out of cash

the meth was removed for the most part when i had the supercharger removed

once i recover i am going with a direct meth port and bumping the boost up

as for now it was a long road just to get the kit on and tuned

top of next year goal by april :

direct port meth kit
clutch
electronic boost controller
and more boost

ANMVQ · 07-29-2013, 08:07 AM

Great numbers on 8PSI, Good choice staying safe

Nissan370 · 07-29-2013, 11:25 AM

Were you been man u get another car anmvq

Mr.Squeeze · 07-29-2013, 01:02 PM

Congrats and welcome to the built motor Turbo club now it's time to enjoy the car

07-12-2013, 05:22 PM	#91 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Nice numbers for only 8psi. Congrats! Sent with TapAhoe __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

07-13-2013, 10:47 PM	#93 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Vsr should get the car on Monday Bobby is going to install the kit for dam near free because of the wait and problem i have been having real cool guy. regulator11 and elperuano like this. __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

07-28-2013, 08:00 PM	#94 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Ok the car is done and a very safe tune was added by vsr I made a little less hp do to my lower compression but thats fine 523 /460@ the wheel at 10 psi with just 17 deg. Of timming Thats up from 436/340 at 9psi on the stillen Also looks like max boost is about 3800 rpms Once i get the car and dyno back I will post the sheet Mr.Squeeze and elperuano like this. __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out) Last edited by Nissan370; 07-28-2013 at 08:09 PM.

07-28-2013, 08:11 PM	#96 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Not yet was going to fly down and drive back but cant get off work so I will be shipped to me some time this week __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

07-28-2013, 08:14 PM	#97 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	So time to clean up the stillen kit and put it up for sale __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

07-12-2013, 09:01 PM	#92 (permalink)
regulator11 Base Member Join Date: Aug 2011 Location: Cape Coral Fl Posts: 34 Drives: 09 Nissan 370z BS M6 Rep Power: 13	Thanks. They felt safe at 10 but I was happy at 8

07-28-2013, 08:06 PM	#95 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Nice. Yours is the Black Z right? Did you get your car back?

07-28-2013, 08:22 PM	#98 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	LoL I'm in the same boat as you. My white 370z had the Stillen kit but is at VSR now getting all that yanked out for their single turbo setup. I'm supposed to be flying down there hopefully this week to drive back There's not a lot of info/reviews on this here so I plan on doing a lot of photos, videos, and write-ups as soon as I can, just to help others out.

07-28-2013, 08:51 PM	#99 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Same here once I get it back videos and pictures bobby put up a small video on his facebook page of the dyno __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

07-28-2013, 10:29 PM	#100 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 28	That's great numbers for a safe conservative tune and 10 lbs. of boost. Curious why did you stop at 10lbs? You're built motor and meth still correct? You barely scratching the surface of what that motor plus meth could really handle. Should try a high boost and low boost setting. Cmon doooeeeettttt!! DarkJak likes this.

07-29-2013, 12:14 AM	#101 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 22	__________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

07-29-2013, 05:35 AM	#102 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	ha ha ha remember elperuano your the reason i pulled the trigger on the turbo kit when you keep getting on me for having a stillen and a build motor lol anyways ya i did wimp out some i just wanted the kit on and working and i cant afford any and i mean any problems to pop up as i am out of cash the meth was removed for the most part when i had the supercharger removed once i recover i am going with a direct meth port and bumping the boost up as for now it was a long road just to get the kit on and tuned top of next year goal by april : direct port meth kit clutch electronic boost controller and more boost DarkJak, elperuano and megalapagas like this. __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out) Last edited by Nissan370; 07-29-2013 at 05:43 AM.

07-29-2013, 08:07 AM	#103 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Great numbers on 8PSI, Good choice staying safe __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

07-29-2013, 11:25 AM	#104 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	Were you been man u get another car anmvq __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

07-29-2013, 01:02 PM	#105 (permalink)
Mr.Squeeze A True Z Fanatic Join Date: Aug 2010 Location: Keystone state Posts: 1,209 Drives: 2010 370z Rep Power: 20152	Congrats and welcome to the built motor Turbo club now it's time to enjoy the car __________________ Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Mounted Turbo (scratch build)	jnaut	Forced Induction	182	12-06-2012 10:20 AM
going to have a supercharger and a turbo on my Z	Fabio88	Forced Induction	71	07-11-2012 07:37 PM
Supercharger/Turbo kit...?	ATM_Patrik	Forced Induction	41	07-28-2011 08:53 AM
supercharger vs turbo	mfrunlimited	Forced Induction	5	06-03-2011 02:22 PM
Rear mounted turbo kit	Brazilbro	Forced Induction	64	06-29-2009 06:39 PM