Fast Intentions "Twin Turbo Kit" is here

Carbon_z · 08-19-2015, 01:32 PM

Quote:

Originally Posted by Spooler

I may or may not know you. I have been around Z's for a long time, I just disappeared for a little bit.

Well if you see a full carbon fiber 370z its mine

bullitt5897 · 08-19-2015, 02:30 PM

Quote:

Originally Posted by Carbon_z

These turbos werent cheap... lots of Porsche 911 turbos are running it.

no one said anything about the price of the turbos... yes lots of Porsche's run alpha turbos from Tial but then again the ones running the 28 series framed turbos are only running 600-800hp. Granted I do not believe yours are exactly the same as those in the porsche kits and that is a different motor.

I am still curious to see the compressor maps. 75% efficiency is nice but anyone who can read compressor maps knows that there are alot of factors in determining if the selected turbo will fit your application and build. knowing the compressor maps we can plot out your theoretical HP limits of your turbos for your motor size.

I already know that I need to be in between a GTX35R and a GTX4202R for the power levels I want... but again knowing our space constraints and the size of housings the only way for me to achieve those is to go to a front mount turbo manifold. I am still going through various compressor maps of different turbos to determine the best solution.

Good luck and I hope you guys can post the compressor maps. If anything it would be informative for the community. If your numbers are true you are flowing as much as a GTX35 in a GTX28 sized turbine frame! That is quite an accomplishment.

Carbon_z · 08-19-2015, 03:16 PM

Quote:

Originally Posted by bullitt5897

no one said anything about the price of the turbos... yes lots of Porsche's run alpha turbos from Tial but then again the ones running the 28 series framed turbos are only running 600-800hp. Granted I do not believe yours are exactly the same as those in the porsche kits and that is a different motor.

I am still curious to see the compressor maps. 75% efficiency is nice but anyone who can read compressor maps knows that there are alot of factors in determining if the selected turbo will fit your application and build. knowing the compressor maps we can plot out your theoretical HP limits of your turbos for your motor size.

I already know that I need to be in between a GTX35R and a GTX4202R for the power levels I want... but again knowing our space constraints and the size of housings the only way for me to achieve those is to go to a front mount turbo manifold. I am still going through various compressor maps of different turbos to determine the best solution.

Good luck and I hope you guys can post the compressor maps. If anything it would be informative for the community. If your numbers are true you are flowing as much as a GTX35 in a GTX28 sized turbine frame! That is quite an accomplishment.

Okay thanks

brucelidat · 08-20-2015, 05:28 PM

Cycy, did you get your car? Is the 7at upgrade officially done?

GeauxTigers1 · 08-21-2015, 01:29 PM

FIIIIIINE forking over the extra dough and doing Ecutek you sons a bitches....

Just seems to make sense now with all the perks you get with that tuning. Still going 100% e85 99.9% of the time though! (60% of the time is works every time)
Z is at Tony's! Thinking Mid September! aaayeeaha!

cycy89 · 08-21-2015, 01:55 PM

Quote:

Originally Posted by brucelidat

Cycy, did you get your car? Is the 7at upgrade officially done?

No not yet. My car broke the dyno. Lol.

bullitt5897 · 08-21-2015, 02:05 PM

Quote:

Originally Posted by cycy89

No not yet. My car broke the dyno. Lol.

Dont be taking my excuse! I literally broke a dyno... lol

F.I. Inc. · 08-21-2015, 03:14 PM

Quote:

Originally Posted by bullitt5897

Dont be taking my excuse! I literally broke a dyno... lol

So did his! But all is well now. It was the solenoid for the brake. We will be back at it next Monday to hopefully wrap her up and get her home to Cy.

-Tony

bullitt5897 · 08-21-2015, 05:04 PM

Hahaha nice!

Carbon_z · 08-21-2015, 08:03 PM

Quote:

Originally Posted by cycy89

No not yet. My car broke the dyno. Lol.

You break it, you buy it

lol

cycy89 · 08-21-2015, 08:09 PM

Quote:

Originally Posted by Carbon_z

You break it, you buy it

lol

Trade z for dyno. Lol

djtodd · 08-21-2015, 09:14 PM

I'm not sure they can legally post the maps. I know some time ago they (tial) were not able to, but the relationship with Garrett has changed(ended?) so...maybe?!

conmam · 08-21-2015, 11:00 PM

Well .... My turbo set up is ready !!!! I am driving all the way from Billings, MT to see Tony and spend some time with him as well as picking up my kit. I will email you the exact date and time.....

Cheers

GeauxTigers1 · 08-22-2015, 12:53 AM

Quote:

Originally Posted by F.I. Inc.

So did his! But all is well now. It was the solenoid for the brake. We will be back at it next Monday to hopefully wrap her up and get her home to Cy.

-Tony

My God...those words must be better than a pornstar whispering nasties in your ear.

Cy, I saw your car there brotha! Absolutely gorgeous! Congrats man!! Can't wait to meet you and her at one of these meets one day!

conmam · 08-27-2015, 03:00 AM

Any way, I finally met Tony and Dan today and picked up the TT setup. Man, long drive but pretty fun on a 4runner. A lot of stuff to bring back here as you all know.

Tony was very professional and I was very impressed with the "Large Corporation Mentality" Quality Control that he is exercising for his customers. Pretty damn thorough and time consuming. I am impressed since I used to work for large OEM companies including Intel, IBM, KLA Tencor... etc and I see that he is not much different than the QA departments there.

I am on my way back to Montana. Just about to leave the hotel ....

Will post more later on.....

Tony was willing to spend even more times if needed. Unfortunately, I had to go back since it is going to be a real long drive

Thanks Tony and Dan. You are the men. I will be in touch soon

08-20-2015, 05:28 PM	#3589 (permalink)
brucelidat A True Z Fanatic Join Date: Jun 2011 Location: temple city, ca Posts: 2,432 Drives: 2011 370z 7AT GM Sp Rep Power: 30	Cycy, did you get your car? Is the 7at upgrade officially done? blueranger and Darth_Hazer like this. __________________ Works Emotion CR Ultimate - FI CBE w/ 18" resonators - Ecutek - eibach sways - Quaife - FI LTH w/race cats - kw v3 - spl - Topgunz SC - 488whp 398trq

08-21-2015, 01:29 PM	#3590 (permalink)
GeauxTigers1 Track Member Join Date: Nov 2011 Location: Surprise, Az Posts: 590 Drives: 2017 370Z Nismo Rep Power: 6744	FIIIIIINE forking over the extra dough and doing Ecutek you sons a bitches.... Just seems to make sense now with all the perks you get with that tuning. Still going 100% e85 99.9% of the time though! (60% of the time is works every time) Z is at Tony's! Thinking Mid September! aaayeeaha! bullitt5897, Carbon_z, ANMVQ and 3 others like this. __________________ Fast Intentions Kit Stage 2 #076 2017 Twin Turbo 370z Nismo. JMS Built Block, Closed Deck 874whp, 803lbs Tq e85 Ecutek Tune

08-21-2015, 05:04 PM	#3594 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Hahaha nice! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

08-21-2015, 09:14 PM	#3597 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	I'm not sure they can legally post the maps. I know some time ago they (tial) were not able to, but the relationship with Garrett has changed(ended?) so...maybe?! __________________ DJTodd's Build Thread Fast Intentions • Volk • Stoptech • Carbotech • SPL • Southbend • OS Giken • RJM • Sparco • RobiSpec • AIM • Driver Mod

08-21-2015, 11:00 PM	#3598 (permalink)
conmam Base Member Join Date: Oct 2010 Location: Billings, Montana Posts: 164 Drives: 370Z Touring 6MT Rep Power: 14	Well .... My turbo set up is ready !!!! I am driving all the way from Billings, MT to see Tony and spend some time with him as well as picking up my kit. I will email you the exact date and time..... Cheers GaleForce, GeauxTigers1, djtodd and 2 others like this.

08-27-2015, 03:00 AM	#3600 (permalink)
conmam Base Member Join Date: Oct 2010 Location: Billings, Montana Posts: 164 Drives: 370Z Touring 6MT Rep Power: 14	Any way, I finally met Tony and Dan today and picked up the TT setup. Man, long drive but pretty fun on a 4runner. A lot of stuff to bring back here as you all know. Tony was very professional and I was very impressed with the "Large Corporation Mentality" Quality Control that he is exercising for his customers. Pretty damn thorough and time consuming. I am impressed since I used to work for large OEM companies including Intel, IBM, KLA Tencor... etc and I see that he is not much different than the QA departments there. I am on my way back to Montana. Just about to leave the hotel .... Will post more later on..... Tony was willing to spend even more times if needed. Unfortunately, I had to go back since it is going to be a real long drive Thanks Tony and Dan. You are the men. I will be in touch soon TerribleONE, F.I. Inc., FPenvy and 3 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here