Stillen SC Build 500 WHP?

EVOHUNTER

Yah, this kit is a head ache, I just bought some stuff today for cooling. Picked up a bosch ewp115 water pump - 115 litres pre minute! the stock is 15 litres per minute, bought a 26x9x4 heat exchanger, changing all the lines from 5/8" to 1-1/4".
im just looking for a good reservior now, need one almost double the size, in aluminuim.
any ideas where i can find one?

__________________

ANMVQ

Funny man we are traveling the same path, I have the heat exchanger already, An looked for a upgraded reservoir also but NO ROOM, an not a fan on putting the battery in the trunk. I did a lot of reading on the SVT forums but not all those guy which to a bigger one so I'll stay with the Stillen one and add some Redline stuff.. I did also leave the lines at 5/8 too.

Sorry for the question but he WP is that the WP for the car or the SC fluid, I'm still under warranty.

The upgraded res,You will have to look at the mustang guys site, SVT, and Cobra sites( Vendors). I found a few

2003-2004 Mustang Cobra Cooling Mods - Canton - Free Shipping

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

EVOHUNTER

[QUOTE=ANMVQ;1876234]Funny man we are traveling the same path, I have the heat exchanger already, An looked for a upgraded reservoir also but NO ROOM, an not a fan on putting the battery in the trunk. I did a lot of reading on the SVT forums but not all those guy which to a bigger one so I'll stay with the Stillen one and add some Redline stuff.. I did also leave the lines at 5/8 too.

Sorry for the question but he WP is that the WP for the car or the SC fluid, I'm still under warranty.

The upgraded res,You will have to look at the mustang guys site, SVT, and Cobra sites( Vendors). I found a few][/QUOTE
This pump will be for supercharger system, the one thats in there is very weak.

__________________

Boosted Performance

Should bring that by one day and we get rid of the water/air cooler. Then to a proper air/air intercooler with the OEM TB's/plenum.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Nissan370

That's what I was thinking just run the pipping from the blower to fmic then to tb I would even keep the air to water cooler in place can't hurt maybe .5psi or so boost lost

__________________
370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

Mr.Squeeze

I vote for this EVOHUNTER your close to boosted performance. Let him switch that kit to air to air with the Maf's in there correct location. I am willing to bet that you could make 500whp with out a problem .

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

EVOHUNTER

lets do it! i know your a very busy man sasha, but let me know when ur free.
We could also work out a trade or something. Any of your vehicles need new tires!? tires for labour ahaha
winters coming up, a nice set of x-ices or blizzack dmv1's lol

Also, i know you have alot on your plate but.. if would could figure out a air/air kit.
im sure about 90% of stillen kit owners would purchase this kit.

__________________

ANMVQ

Why dont I have a place like this around me . But couldnt he stay with the Stillen intake mani?

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Mr.Squeeze

The best thing would be to get rid of it that's only if you have someone capable of doing the work. Sasha is more than capable of doing this Air To Air with a blow through set up the way the kit should have been designed from the beginning.

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

ANMVQ

Getting rid of it is :/ in my book. The intake runner design is still better than the stock design no? Just have some thing customed to fit, Again still looking to be different than everyone else,

__________________
14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

Mr.Squeeze

Nothing about the Stillen kit is better than stock.

You cant read IAT's because the maf's are in the fron bumper so the computer has no idea if the car is running hot or not. The Stillen air to water run's hotter than a air to air set up would.

Now I give you some credit for copying/continuing my old set up glad I was able to help you out. I really hope it works out for you trust me I really do.

__________________
Driven Motorsports Single Turbo 7675 T4 1.32 A/R 995WHP 780TQ

EVOHUNTER

I dont have sashas number, his private messages are disabled.
When i talk to him ill let u guys know.

__________________

JMac88

I'll give him your number

__________________
*Full Mod List*

Boosted Performance

Whaaaat? I will check this out....looks like my sponsorship is paid up to date..hmmm.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg