Boosted Performance single turbo build

GaleForce · 12-01-2012, 08:07 PM

Nice!

I can see mine! Looks awesome!

ENT-Z · 12-01-2012, 08:48 PM

Wish you were better already!

Glad to see the progress though! I see mine too

Boosted Performance · 12-05-2012, 02:01 PM

Well, even with me moving at half speed, I hope to have all the fabrication done by Sunday nigh of this week. All the intercooler pipes have been cut, and all the sections between the turbo and FMIC are welded up. So on the IC sice I still have to fabricate the charge pipes that go from the IC outlets to the TB's.

After that, I am going to make all the oil lines, and then start preparing things for shipping.

Dzel · 12-05-2012, 02:04 PM

Missed you bud had us worried for a bit. Glad your feeling good enough to work.

m3chhawk · 12-05-2012, 08:49 PM

I know it's probably a bit early to be looking this far in advance and you are just trying to get the first batch out the door, but do you have a rough timeline of when you think the next set would be ready to ship? I'm just looking like +- 2 months here nothing in particular.

Hope you get to feeling better man.

Boosted Performance · 12-05-2012, 09:08 PM

Quote:

Originally Posted by m3chhawk

I know it's probably a bit early to be looking this far in advance and you are just trying to get the first batch out the door, but do you have a rough timeline of when you think the next set would be ready to ship? I'm just looking like +- 2 months here nothing in particular.

Hope you get to feeling better man.

At this time I don't have anything as a sure thing. After these 6 kits are gone I will be building two kits for a couple of 350z customers. Once those are out, I hope to take a bit of time to myself, and get some small things done on my own car. That will probably take me to March. At that point I can start on a few more 370z kits.

Boosted Performance · 12-07-2012, 05:57 PM

On page 70 of the install manual...and there is still the fuel pump, charge pipes (FMIC to TB), down pipe and recirc system to cover...

There is a lot of large color pictures

This thing will cost $50 to print on some nice glossy paper.

On the other hand, IC pipes are 90% complete.

Boosted Performance · 12-09-2012, 07:22 PM

Sunday night...and I just got in from the shop.

It seems that there is always more work to be done than I think....not sure how that works. Anyway, I am starting a large pile (not an actual pile, but neatly stacked) pipes that have been completed, and can be wrapped. It looks great…and I am happy that this is getting closer to the end.

All the aluminium pipes have been fabricated, with MAF housings welded on. These are now ready for the final finish. I still have to weld the BOV flanges, waste gate flanges, and manifold 3-bolt flanges. The manifolds have gone in and out of the jigs half a dozen times (each). I am checking clearances on these every time welding is done on them….these have to be perfect (not that the rest don’t).

I will probably take next Friday off from the day job, and start packaging. Once I get one kit packed up, I will know the box dimensions and weight. From there I will be sending out PM’s on the balances due. Once those are in, shipping will commence. That is the schedule that I am going to try and stick to.

On a more personal note, I have another doctor’s appointment in the morning…ultrasound. Hope to get some good news, or at least something more than hearing the doctor say: “I don’t know what is causing all the pain”…fingers crossed.

GaleForce · 12-09-2012, 07:32 PM

Sasha, I hope you get the answers you need at your next Doctor appointment.

Also, thanks for the updates.

ENT-Z · 12-09-2012, 08:41 PM

Thanks for the updates and good luck with the doctor's appointment! Take some pain meds before the ultrasound since you are already in pain - sometimes they press pretty hard with those ultrasound probes.

wheee! · 12-10-2012, 09:47 AM

Sounds like you are making great progress with the kits Sasha! Looking forward to hearing the reviews on the kits as people install them.

Any updates on the canned tune from Vince? Is it going to be based on James' tune?

Boosted Performance · 12-10-2012, 02:23 PM

Quote:

Originally Posted by wheee!

Any updates on the canned tune from Vince? Is it going to be based on James' tune?

I had a talk with Vince this morning about this...and the best way to get a true kit specific map is to have a car on his dyno, so he can build the map from scratch.

This would mean proper adjustments made in the proper tuning tables. I know one of the guys that purchased the kit will be going down there (from Ontario) in the spring for a tune, and that would be the perfect opportunity for this.

The last kit was supposed to go to Vince, so he can install it on a customer’s car and build the map. Looks like the customer decided to wait a bit longer, so that plan has foiled.

m3chhawk · 12-10-2012, 02:35 PM

Quote:

Originally Posted by Boosted Performance

I had a talk with Vince this morning about this...and the best way to get a true kit specific map is to have a car on his dyno, so he can build the map from scratch.

This would mean proper adjustments made in the proper tuning tables. I know one of the guys that purchased the kit will be going down there (from Ontario) in the spring for a tune, and that would be the perfect opportunity for this.

The last kit was supposed to go to Vince, so he can install it on a customer’s car and build the map. Looks like the customer decided to wait a bit longer, so that plan has foiled.

Does this mean the 6th kit is available again?

Boosted Performance · 12-11-2012, 01:55 PM

Quote:

Originally Posted by m3chhawk

Does this mean the 6th kit is available again?

I guess it is. However, I am now focused on completing the 5 kits that I have deposits for. After that, I have to build two kits for the 350z's since I have two deposits for that. Then, once those are done I can finish the last kit for the 370z.

Tonight I need to weld in the BOV flanges and the IC piping is then 100% complete. Should have everything done this week.

So, things are looking good.

GaleForce · 12-11-2012, 03:06 PM

Quote:

Originally Posted by Boosted Performance

I guess it is. However, I am now focused on completing the 5 kits that I have deposits for. After that, I have to build two kits for the 350z's since I have two deposits for that. Then, once those are done I can finish the last kit for the 370z.

Tonight I need to weld in the BOV flanges and the IC piping is then 100% complete. Should have everything done this week.

So, things are looking good.

I hope my "extra options" don't throw you off.

12-01-2012, 08:07 PM	#1231 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Nice! I can see mine! Looks awesome! ENT-Z likes this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

12-01-2012, 08:48 PM	#1232 (permalink)
ENT-Z Enthusiast Member Join Date: Feb 2009 Location: St. Louis, MO Posts: 460 Drives: 09 MB 6MT 370Z Rep Power: 16	Wish you were better already! Glad to see the progress though! I see mine too GaleForce likes this.

12-05-2012, 02:01 PM	#1233 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Well, even with me moving at half speed, I hope to have all the fabrication done by Sunday nigh of this week. All the intercooler pipes have been cut, and all the sections between the turbo and FMIC are welded up. So on the IC sice I still have to fabricate the charge pipes that go from the IC outlets to the TB's. After that, I am going to make all the oil lines, and then start preparing things for shipping. ENT-Z, Dzel, GaleForce and 1 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

12-05-2012, 02:04 PM	#1234 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 23	Missed you bud had us worried for a bit. Glad your feeling good enough to work. __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

12-07-2012, 05:57 PM	#1237 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	On page 70 of the install manual...and there is still the fuel pump, charge pipes (FMIC to TB), down pipe and recirc system to cover... There is a lot of large color pictures This thing will cost $50 to print on some nice glossy paper. On the other hand, IC pipes are 90% complete. ENT-Z, anthonyy, GaleForce and 3 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg Last edited by Boosted Performance; 12-07-2012 at 05:59 PM.

12-05-2012, 08:49 PM	#1235 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	I know it's probably a bit early to be looking this far in advance and you are just trying to get the first batch out the door, but do you have a rough timeline of when you think the next set would be ready to ship? I'm just looking like +- 2 months here nothing in particular. Hope you get to feeling better man.

12-09-2012, 07:22 PM	#1238 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Sunday night...and I just got in from the shop. It seems that there is always more work to be done than I think....not sure how that works. Anyway, I am starting a large pile (not an actual pile, but neatly stacked) pipes that have been completed, and can be wrapped. It looks great…and I am happy that this is getting closer to the end. All the aluminium pipes have been fabricated, with MAF housings welded on. These are now ready for the final finish. I still have to weld the BOV flanges, waste gate flanges, and manifold 3-bolt flanges. The manifolds have gone in and out of the jigs half a dozen times (each). I am checking clearances on these every time welding is done on them….these have to be perfect (not that the rest don’t). I will probably take next Friday off from the day job, and start packaging. Once I get one kit packed up, I will know the box dimensions and weight. From there I will be sending out PM’s on the balances due. Once those are in, shipping will commence. That is the schedule that I am going to try and stick to. On a more personal note, I have another doctor’s appointment in the morning…ultrasound. Hope to get some good news, or at least something more than hearing the doctor say: “I don’t know what is causing all the pain”…fingers crossed. ENT-Z, XwChriswX, GaleForce and 6 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

12-09-2012, 07:32 PM	#1239 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Sasha, I hope you get the answers you need at your next Doctor appointment. Also, thanks for the updates. ENT-Z, OldBoy and Mitco39 like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

12-09-2012, 08:41 PM	#1240 (permalink)
ENT-Z Enthusiast Member Join Date: Feb 2009 Location: St. Louis, MO Posts: 460 Drives: 09 MB 6MT 370Z Rep Power: 16	Thanks for the updates and good luck with the doctor's appointment! Take some pain meds before the ultrasound since you are already in pain - sometimes they press pretty hard with those ultrasound probes.

12-10-2012, 09:47 AM	#1241 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40181	Sounds like you are making great progress with the kits Sasha! Looking forward to hearing the reviews on the kits as people install them. Any updates on the canned tune from Vince? Is it going to be based on James' tune? __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 10:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 10:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 08:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM