Boosted Performance single turbo build

sfearl1 · 08-22-2012, 08:38 AM

Mount it on the front fender behind the passenger wheel?

98intrigue · 08-22-2012, 07:22 PM

Quote:

Originally Posted by JMac88

Wish the video picked up the turbo more, maybe at a different angle? Anyone with more go pro experience? People tell me they can really hear it behind the car, I can hear it in the cabin too but nothing came through.

For my Zdayz 2011 video, I mounted my gopro on the lower left inlet of the front bumper. It sounded great in my opinion.

BlkNismo · 08-25-2012, 11:23 AM

Sasha, will you be able to provide an option to have a high flow cat welded into your downpipe with this kit? (100 cell)

cavemancan · 08-29-2012, 04:34 PM

Boosted,

I read in my Rx8 days some of the guys used the Boost-A-Pump to keep fuel temperatures under control. Do you think with such a big pump that this would be necessary? Below is a copy-pasta of the Boost-A-Pump info and link:

Boost-A-Pump

Quote:

A time tested and proven Kenne Bell innovation, the BOOST-A-PUMP™, powers some of the world’s most powerful production street and competition vehicles. The 800HP Shelby Super Snake, one of the World’s Fastest Production Sport Cars, the 242+mph 806HP Koenigsegg CCR, the dual turbo 1100HP Lingenfelter 427" Corvette 900HP Mr. Norm Dodge and 650-825HP RPO Camaros and, of course, all the legendary Kenne Bell kits can use the BOOST-A-PUMP™ to reliably produce those big HP numbers - on pump gas! It activates only at full throttle or boost, so it doesn’t “bloat” or “overload” the fuel system at idle or cruise where full time pumps and extra fuel are not required. So, the fuel isn’t heated (gasoline begins to boil at 87°). No “cool can” is necessary. And it’s much easier to install (cut one wire) and more reliable than fuel pumps. And since the BAP is also a voltage regulator (exclusive kb) it helps prevent engine damage from low voltage/ reduced pump flow during electrical overload or failure. It will attempt to stabilize the pump voltage and maintain sufficient fuel flow.

erkthejerk73 · 09-02-2012, 10:47 AM

any update boosted?

JMac88 · 09-02-2012, 08:50 PM

He is on his last family camping trip. I believe his intent is to start production when he is back

erkthejerk73 · 09-03-2012, 11:39 AM

Quote:

Originally Posted by JMac88

He is on his last family camping trip. I believe his intent is to start production when he is back

TY didnt know he was gone again. I will just wait longer...

Boosted Performance · 09-03-2012, 07:01 PM

Picking up the materials for jigs this week. Things will start moving along now that summer is over (for us up here anyway).

erkthejerk73 · 09-05-2012, 10:03 AM

Quote:

Originally Posted by Boosted Performance

Picking up the materials for jigs this week. Things will start moving along now that summer is over (for us up here anyway).

NitrousZ34 · 09-12-2012, 08:40 PM

I have never enjoyed reading through 54 pages straight on a forum in my life. This looks like a very thought out kit. I have REALLY been leaning towards going with the GTM stage 2 kit, but your kit looks just as nice. I would opt for open dumps because i want to be heard, but thats just me. Have you thought about a final price yet for your kit?

Boosted Performance · 09-12-2012, 10:29 PM

Quote:

Originally Posted by NitrousZ34

I have never enjoyed reading through 54 pages straight on a forum in my life. This looks like a very thought out kit. I have REALLY been leaning towards going with the GTM stage 2 kit, but your kit looks just as nice. I would opt for open dumps because i want to be heard, but thats just me. Have you thought about a final price yet for your kit?

Thank you, the kit is simple and works very well. For power it is on par with the TT kits, with a larger fuel system and half the install cost.

The price with a complete oil cooler kit will be around $7300. This is a saving of about $1100 over the TT kit when you account for the oil cooler and better fuel system. This is a complete kit with UpRev, 750cc injectors, 340lph fuel pump...ect. Open dump will be a bit cheaper, and if you already have an oil cooler even cheaper. The install is also about half the price, not to mention that it is a straight forward DIY install.

If you have any more questions just let me know.

JMac88 · 09-12-2012, 11:20 PM

Sasha, you should point out its the tuner version of uprev, not just the Standard

GaleForce · 09-13-2012, 07:57 AM

^^^ this kit really does include everything you could need.

I need to buy everything except for the Uprev. I already have the standard version, it would probably be cheaper for me to buy the upgrade to tuner from Uprev.

CSA0890 · 09-13-2012, 08:15 AM

Quote:

Originally Posted by Boosted Performance

Thank you, the kit is simple and works very well. For power it is on par with the TT kits, with a larger fuel system and half the install cost.

The price with a complete oil cooler kit will be around $7300. This is a saving of about $1100 over the TT kit when you account for the oil cooler and better fuel system. This is a complete kit with UpRev, 750cc injectors, 340lph fuel pump...ect. Open dump will be a bit cheaper, and if you already have an oil cooler even cheaper. The install is also about half the price, not to mention that it is a straight forward DIY install.

If you have any more questions just let me know.

When is this up for sale?

cavemancan · 09-13-2012, 08:28 AM

Quote:

Originally Posted by cavemancan

Boosted,

I read in my Rx8 days some of the guys used the Boost-A-Pump to keep fuel temperatures under control. Do you think with such a big pump that this would be necessary? Below is a copy-pasta of the Boost-A-Pump info and link:

Boost-A-Pump

Quote:

A time tested and proven Kenne Bell innovation, the BOOST-A-PUMP™, powers some of the world’s most powerful production street and competition vehicles. The 800HP Shelby Super Snake, one of the World’s Fastest Production Sport Cars, the 242+mph 806HP Koenigsegg CCR, the dual turbo 1100HP Lingenfelter 427" Corvette 900HP Mr. Norm Dodge and 650-825HP RPO Camaros and, of course, all the legendary Kenne Bell kits can use the BOOST-A-PUMP™ to reliably produce those big HP numbers - on pump gas! It activates only at full throttle or boost, so it doesn’t “bloat” or “overload” the fuel system at idle or cruise where full time pumps and extra fuel are not required. So, the fuel isn’t heated (gasoline begins to boil at 87°). No “cool can” is necessary. And it’s much easier to install (cut one wire) and more reliable than fuel pumps. And since the BAP is also a voltage regulator (exclusive kb) it helps prevent engine damage from low voltage/ reduced pump flow during electrical overload or failure. It will attempt to stabilize the pump voltage and maintain sufficient fuel flow.

Wasn't sure if you saw this. I'm just curious if you think this is a benefit of not?

BTW...I never considered boosting via turbo until I saw this thread. So conflicted lmao! Great job!

08-22-2012, 08:38 AM	#796 (permalink)
sfearl1 A True Z Fanatic Join Date: Oct 2011 Location: St. Louis Posts: 2,300 Drives: 2013 FBO E85 GTR Rep Power: 19	Mount it on the front fender behind the passenger wheel? __________________ Scott

09-02-2012, 08:50 PM	#801 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 16	He is on his last family camping trip. I believe his intent is to start production when he is back __________________ Full Mod List

09-03-2012, 07:01 PM	#803 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3384	Picking up the materials for jigs this week. Things will start moving along now that summer is over (for us up here anyway). Nut_N_Much likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

09-12-2012, 11:20 PM	#807 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 16	Sasha, you should point out its the tuner version of uprev, not just the Standard __________________ Full Mod List

09-13-2012, 07:57 AM	#808 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	^^^ this kit really does include everything you could need. I need to buy everything except for the Uprev. I already have the standard version, it would probably be cheaper for me to buy the upgrade to tuner from Uprev. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

08-25-2012, 11:23 AM	#798 (permalink)
BlkNismo Track Member Join Date: Sep 2011 Location: USA Posts: 614 Drives: Nismo Rep Power: 16	Sasha, will you be able to provide an option to have a high flow cat welded into your downpipe with this kit? (100 cell)

09-02-2012, 10:47 AM	#800 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 17	any update boosted?

09-12-2012, 08:40 PM	#805 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	I have never enjoyed reading through 54 pages straight on a forum in my life. This looks like a very thought out kit. I have REALLY been leaning towards going with the GTM stage 2 kit, but your kit looks just as nice. I would opt for open dumps because i want to be heard, but thats just me. Have you thought about a final price yet for your kit?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
STS 370Z Single Turbo System	STSTurbo.com	Forced Induction	337	11-21-2012 10:55 AM
Question about a single turbo set up?	dnasty370z	Forced Induction	8	07-26-2012 10:56 AM
New Single Turbo Option.. yes please	Isamu	Forced Induction	108	05-09-2012 08:07 AM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM