GTM Performance Engineering VQ45VHR-Our Journey to The 1000 HP and Beyond

1slow370 · 06-16-2011, 04:40 AM

flow isn't going to be the biggest advantage with the vr plenum from what i see, they both flow sufficiently for the motor but the vr manifold has nice tapered runners and plenum shape to distribute air better it may also have harmonic gains over the hr and vhr plenums that won't show up in the flow test but could have a significant effect on torque and horsepower. best of all the new manifold set will be all aluminum for increased manifold durability under boost.

DIGItonium · 06-19-2011, 11:16 AM

I would love to be able to get the VR38 Plenum installed along with the stage 2 this month, but it looks like I may end up playing it safe and just have Baker install the kit.

JB-370z · 06-19-2011, 10:22 PM

Nice, almost 100 pages of posts.

B.A.Q · 06-21-2011, 04:08 AM

it's officially a year I guess

Reality · 06-21-2011, 09:48 AM

^^And still not 1 legitimate Dyno chart...

bullitt5897 · 06-21-2011, 12:10 PM

Quote:

Originally Posted by Reality

^^And still not 1 legitimate Dyno chart...

Apparently someone has selective reading... I have said time and time again that we will post all the data when we are finished and I mean completely finished...

Reality · 06-21-2011, 12:29 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Apparently someone has selective reading... I have said time and time again that we will post all the data when we are finished and I mean completely finished...

No, not at all.
-Just noting an observation in response to the two who posted above me..

1. almost at 100 pages
2. build is officially a year
3. no dyno charts have been released, to-date

Question,
what is the difference between "finished" & "Completely Finished"?

bullitt5897 · 06-21-2011, 12:56 PM

Quote:

Originally Posted by Reality

No, not at all.
-Just noting an observation in response to the two who posted above me..

1. almost at 100 pages
2. build is officially a year
3. no dyno charts have been released, to-date

Question,
what is the difference between "finished" & "Completely Finished"?

1. Yes the build is 1 yr old.
2. The reason for the long build time (not an excuse) is the fact that we have been using my build to make these mods reproducible and not a "one off" build...
3. No dynos have been released as we have been constantly making changes... imagine the confusion if one part enables the car to make soo much power then we add a component and the numbers are not as high then we go back make revisions to that component to make sure everything works together and make even more power.... It can get real confusing...
4. Completely finished means when the reproducible part designs and the car running those parts makes the stated numbers.

Please be patient we are literally days away from being finished...

b1adesofcha0s · 06-21-2011, 12:59 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Please be patient we are literally days away from being finished...

I hope so.

( Click to show/hide )

98intrigue · 06-21-2011, 12:59 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

Please be patient we are literally days away from being finished...

XwChriswX · 06-21-2011, 03:19 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

1. Yes the build is 1 yr old.
2. The reason for the long build time (not an excuse) is the fact that we have been using my build to make these mods reproducible and not a "one off" build...
3. No dynos have been released as we have been constantly making changes... imagine the confusion if one part enables the car to make soo much power then we add a component and the numbers are not as high then we go back make revisions to that component to make sure everything works together and make even more power.... It can get real confusing...
4. Completely finished means when the reproducible part designs and the car running those parts makes the stated numbers.

Please be patient we are literally days away from being finished...

What? You mean GTM doesn't rush products to the market without fully R&D'ing them?! Seriously.

I want products meow! I don't care if they work or not!

Who does that?!

b1adesofcha0s · 06-21-2011, 04:06 PM

Putting my TT kit on one turbo at a time

bullitt5897 · 06-21-2011, 04:20 PM

Quote:

Originally Posted by XwChriswX

What? You mean GTM doesn't rush products to the market without fully R&D'ing them?! Seriously.

I want products meow! I don't care if they work or not!

Who does that?!

hahahaha

bullitt5897 · 06-21-2011, 04:21 PM

Quote:

Originally Posted by b1adesofcha0s

Putting my TT kit on one turbo at a time

thats the only way to do it...

b1adesofcha0s · 06-21-2011, 04:24 PM

You can run a single turbo setup while you're waiting for the R&D for the second turbo to be finished

06-16-2011, 04:40 AM	#1456 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7250	flow isn't going to be the biggest advantage with the vr plenum from what i see, they both flow sufficiently for the motor but the vr manifold has nice tapered runners and plenum shape to distribute air better it may also have harmonic gains over the hr and vhr plenums that won't show up in the flow test but could have a significant effect on torque and horsepower. best of all the new manifold set will be all aluminum for increased manifold durability under boost. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

06-19-2011, 11:16 AM	#1457 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	I would love to be able to get the VR38 Plenum installed along with the stage 2 this month, but it looks like I may end up playing it safe and just have Baker install the kit. __________________

06-19-2011, 10:22 PM	#1458 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Nice, almost 100 pages of posts. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

06-21-2011, 04:08 AM	#1459 (permalink)
B.A.Q Enthusiast Member Join Date: Feb 2011 Location: Phoenix,Az Posts: 302 Drives: Touring 370z Rep Power: 14	it's officially a year I guess __________________ SOLD!! 09 370z Touring MT: GReddy Ti-C CBE - Berk HFC - Stillen 3G CAI '11 Mustang GT/CS 5.0 MT

06-21-2011, 09:48 AM	#1460 (permalink)
Reality Enthusiast Member Join Date: Dec 2008 Location: Toronto, Canada Posts: 290 Drives: '06 PPW GT Rep Power: 16	^^And still not 1 legitimate Dyno chart... __________________ //2005 35th SB #81 [tyra] SOLD //2006 GT PPW SOLD

06-21-2011, 04:06 PM	#1467 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	Putting my TT kit on one turbo at a time __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

06-21-2011, 04:24 PM	#1470 (permalink)
b1adesofcha0s A True Z Fanatic Join Date: Jan 2011 Location: MD Posts: 40,963 Drives: HypeTrain Choo Choo! Rep Power: 141	You can run a single turbo setup while you're waiting for the R&D for the second turbo to be finished __________________ Project: b1adeZmobile (2009 370Z) \| Uprev Tune by AAM Competition \| Berk Exhaust Project: b1adeZmobile 2.0 (2014 C7 Z51) \| Corsa Xtreme Exhaust

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering Stage 1 Turn key Supercharger kit In house Install II.	SAM@GTM	Forced Induction	254	08-11-2010 10:59 AM
GTM Performance Engineering & Forged Performance	azn370z	Forced Induction	59	04-14-2010 12:07 AM