STILLEN 370Z Supercharger System - Announcement!!!

weiboy718 · 09-20-2010, 08:47 PM

Quote:

Originally Posted by Osiris

i'll check with the dealership tomorrow to see if they've received a new tune.

i'm sure they're gonna take care of you very soon! i got my car back since saturday and it's running very good now. i'm guessing all they need to do is get some datalogging from your dealer and see if it's pulling timing up high and adjust from there.

Buzzlitonian · 09-20-2010, 08:43 PM

So, all involved whole heartedly believe it is all programming at fault here and not the machine. Just a long process to eliminate what works and what does not. I truly think that my Z is forwarding through on the last of the unkowns with the SC kit. I have been told the other Z's that have it are doing ok, even after the last modifications I spoke about in my first post. If Osiris you could just hang on another few weeks, the groundwork should be fully laid out and complete. My motivation is the remembering how it drove in the first day and there will be many more like it afterwards.

Buzz

Buzzlitonian · 09-20-2010, 08:50 PM

I am also in a hard decision to just call everyone and pull the plug on the whole thing, but to remove the kit from the car is more difficult to remove than going in. Some parts of the body of the car were modified, cut into, adusted, etc and to restore to original would cause more effort to return like new. Just a sorry spot to be in, right now.

Osiris · 09-20-2010, 08:55 PM

you surely have more patience than I. I can't believe you've been waiting since May...and i thought 3 months was a long time to wait.

Buzzlitonian · 09-20-2010, 08:53 PM

The interesting fact is the Uprev guys in Austin wrote the programs for the Supercharger. So, Stillen is working on a car with these exact same troubles in CA and the Austin guys are working from this end. Collaborative effort here to squash this once and for all. In a weird way, lucky that everyone is communicating on this now and we arent kind of doing this one at a time, reinventing the wheel for each Z that comes in.

roplusbee · 09-21-2010, 07:51 AM

And the plot thickens...............

weiboy718 · 09-21-2010, 08:35 AM

Shumby is

the pot and he should

Hahahahaha! I'm sure any good tuner can tune our Stillen kit. It's just that whoever gets a custom will have no warranty on the complete kit.

shumby · 09-21-2010, 09:43 AM

better to have a workign kit without warrenty then a kit that don't work.

Zsteve · 09-21-2010, 10:17 AM

Quote:

Originally Posted by shumby

better to have a workign kit without warrenty then a kit that don't work.

But they are still warrantied, even if they dont work. LOL.

So get that 8 psi wheel already so we can see what the kit can do.

Kastley85891 · 09-21-2010, 06:19 PM

Quote:

Originally Posted by shumby

better to have a workign kit without warrenty then a kit that don't work.

Bam! +1

Osiris · 09-21-2010, 06:22 PM

so who wants to come to Florida and tune it for me? I could care less about the CARB thing.

theDreamer · 09-21-2010, 06:28 PM

Quote:

Originally Posted by Osiris

so who wants to come to Florida and tune it for me? I could care less about the CARB thing.

Send a PM to RCZ, he is in Florida and should be able to help you out.

RCZ · 09-21-2010, 10:39 PM

Quote:

Originally Posted by Osiris

so who wants to come to Florida and tune it for me? I could care less about the CARB thing.

Let me know, I'll get you squared away with an awesome tune in west palm.

You can PM me if you need help with anything. Happy to help, anyone for that matter.

weiboy718 · 09-21-2010, 10:44 PM

Quote:

Originally Posted by RCZ

Let me know, I'll get you squared away with an awesome tune in west palm.

You can PM me if you need help with anything. Happy to help, anyone for that matter.

^ yep! very good guy and willing to help!

Sibze · 09-21-2010, 09:48 AM

shumby - your asking for it!!! lol

09-20-2010, 08:55 PM	#4 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 21	you surely have more patience than I. I can't believe you've been waiting since May...and i thought 3 months was a long time to wait. __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

09-21-2010, 07:51 AM	#6 (permalink)
roplusbee A True Z Fanatic Join Date: Dec 2009 Location: Killeen, TX Posts: 2,360 Drives: 2007 350Z NISMO Rep Power: 24	And the plot thickens............... __________________ 2007 350Z NISMO #0618: Zerolift \| UPREV \| F.I. \| Greddy \| Competition Clutch \| Injector Dynamics \| Aeromotive \| Pioneer \| JL

09-21-2010, 09:43 AM	#8 (permalink)
shumby Captin Canuck Join Date: Dec 2008 Location: with your mom Age: 46 Posts: 6,288 Drives: your sister Rep Power: 238	better to have a workign kit without warrenty then a kit that don't work. __________________ Originally Posted by SAM@GTM Engine detonation is not normal and it should never never happen, and whoever told that need to do something else for living . Sam

09-21-2010, 06:22 PM	#11 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 21	so who wants to come to Florida and tune it for me? I could care less about the CARB thing. __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

09-20-2010, 08:43 PM	#2 (permalink)
Buzzlitonian Base Member Join Date: Oct 2009 Location: Tx Posts: 22 Drives: 2009 Z Rep Power: 17	So, all involved whole heartedly believe it is all programming at fault here and not the machine. Just a long process to eliminate what works and what does not. I truly think that my Z is forwarding through on the last of the unkowns with the SC kit. I have been told the other Z's that have it are doing ok, even after the last modifications I spoke about in my first post. If Osiris you could just hang on another few weeks, the groundwork should be fully laid out and complete. My motivation is the remembering how it drove in the first day and there will be many more like it afterwards. Buzz

09-20-2010, 08:50 PM	#3 (permalink)
Buzzlitonian Base Member Join Date: Oct 2009 Location: Tx Posts: 22 Drives: 2009 Z Rep Power: 17	I am also in a hard decision to just call everyone and pull the plug on the whole thing, but to remove the kit from the car is more difficult to remove than going in. Some parts of the body of the car were modified, cut into, adusted, etc and to restore to original would cause more effort to return like new. Just a sorry spot to be in, right now.

09-20-2010, 08:53 PM	#5 (permalink)
Buzzlitonian Base Member Join Date: Oct 2009 Location: Tx Posts: 22 Drives: 2009 Z Rep Power: 17	The interesting fact is the Uprev guys in Austin wrote the programs for the Supercharger. So, Stillen is working on a car with these exact same troubles in CA and the Austin guys are working from this end. Collaborative effort here to squash this once and for all. In a weird way, lucky that everyone is communicating on this now and we arent kind of doing this one at a time, reinventing the wheel for each Z that comes in.

09-21-2010, 08:35 AM	#7 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 18	Shumby is the pot and he should Hahahahaha! I'm sure any good tuner can tune our Stillen kit. It's just that whoever gets a custom will have no warranty on the complete kit.

09-21-2010, 09:48 AM	#15 (permalink)
Sibze A True Z Fanatic Join Date: May 2009 Location: Ontario, Canada Posts: 16,202 Drives: In your way Rep Power: 65	shumby - your asking for it!!! lol

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Motorsports: 370Z Supercharger system development	SAM@GTM	Forced Induction	1396	02-02-2014 10:54 PM
STILLEN 370Z Dual Exhaust System w/pricing	AK370Z	STILLEN	25	01-03-2011 07:49 PM
Preparation for the STILLEN supercharger	Kyle@STILLEN	Forced Induction	1087	03-13-2010 05:59 AM
Stillen Supercharger estimates???	NewYorkJon34	Forced Induction	454	01-22-2010 11:05 PM
Will Stillen Supercharger & G3 intakes Connect?	NewYorkJon34	Forced Induction	23	10-31-2009 12:09 AM