Never-ending BP single turbo woes

BettyZ · 08-09-2021, 08:48 PM

Went with Ghostvette's suggestion, took the manifold into a darkened room, shone a light into the driver side flange, and looked for outgoing photons. The exhaust leak (surprise surprise) is coming from the flex pipe portion of the manifold.

madwi · 08-09-2021, 09:03 PM

Quote:

Originally Posted by BettyZ

Went with Ghostvette's suggestion, took the manifold into a darkened room, shone a light into the driver side flange, and looked for outgoing photons. The exhaust leak (surprise surprise) is coming from the flex pipe portion of the manifold.

Hope that **** dont break off and kill your turbo, like it did to mine.

Elmo370z · 08-09-2021, 10:49 PM

Quote:

Originally Posted by BettyZ

Went with Ghostvette's suggestion, took the manifold into a darkened room, shone a light into the driver side flange, and looked for outgoing photons. The exhaust leak (surprise surprise) is coming from the flex pipe portion of the manifold.

Get the fudge out of here

Spooler · 08-10-2021, 09:14 AM

Quote:

Originally Posted by BettyZ

Went with Ghostvette's suggestion, took the manifold into a darkened room, shone a light into the driver side flange, and looked for outgoing photons. The exhaust leak (surprise surprise) is coming from the flex pipe portion of the manifold.

Wonder if it was because you wrapped it?

-ZS-Carpenter · 08-10-2021, 10:31 AM

Quote:

Originally Posted by Spooler

Wonder if it was because you wrapped it?

Just junk chinesium flex pipes. Good chance that piece killed the first turbo. He's lucky a second chunk didn't come off and get the new one.

BettyZ · 08-10-2021, 12:10 PM

Quote:

Originally Posted by Spooler

Wonder if it was because you wrapped it?

Apparently you're not supposed to wrap or coat the pipe before the flex, as it causes the heat to concentrate in the flex. But the breakage was at the far end of the flex from the flange.

I'll also note that I didn't have to put tension on the flex pipe to attach the manifold to the headers. That can also cause premature failure. Might want to look into that, JLarson...

Jinxx · 08-10-2021, 12:31 PM

Quote:

Originally Posted by BettyZ

Went with Ghostvette's suggestion, took the manifold into a darkened room, shone a light into the driver side flange, and looked for outgoing photons. The exhaust leak (surprise surprise) is coming from the flex pipe portion of the manifold.

I had my flex section fail on mine about 6 months after install ….had to cut it out and replace the section…. I message Sasha about it and he reimbursed me the cost of the repair.

08-09-2021, 08:48 PM	#1 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: USA Age: 39 Posts: 5,264 Drives: A Garage Queen Rep Power: 2684373	Went with Ghostvette's suggestion, took the manifold into a darkened room, shone a light into the driver side flange, and looked for outgoing photons. The exhaust leak (surprise surprise) is coming from the flex pipe portion of the manifold. JARblue, Rusty, Hotrodz and 3 others like this. __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single Turbo to Twin Turbo Upgrade?	Terminal Doc	Forced Induction	15	08-16-2018 04:15 PM
Single exhaust & single turbo	6mt370	Forced Induction	16	12-18-2015 10:11 AM
Single turbo kit!	Minniti	Import Dynamics	1	09-22-2015 07:48 AM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Will we see a SINGLE turbo kit?	Brazilbro	Forced Induction	17	07-03-2009 04:03 PM