[BP single kit] Compturbo died @ 6k miles; looking at replacements

Boosted Performance

Well, I spent 20 min on the phone with COMP, and in one of the units that was repaired they found pieces of flex pipe in the turbine housing....which can happen.

So yes, something could go through the turbine as well.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

-ZS-Carpenter

Nobody here cares about one unit they repaired. What we care about is the box of junk parts that clearly have a failed hot side bearing and that stupid air cooled paper weigh sitting right next to it with the exact same failure.

Ffs just man up an admit that you tried to make the kit more user friendly but got scammed by Comp into selling junk for them.

Sent from my SM-G965U using Tapatalk

Rusty

That's not the case with Madwi's unit. The inlet impeller has no FOD marks on it. It's clean. The impeller has rub marks on the sides from contact with the volute. The shaft shows high heat almost to the inlet side bearings. The grease that was on the turbine end has changed to a waxy ash. The grease that was in the inlet side bearings is still good. The turbine side bearings failed from a break down of the grease caused by the high heat generated from the turbine end.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html