Topgunz ROTREX C38R Supercharger Kit

bcfromfl · 04-01-2021, 11:33 PM

Quote:

Originally Posted by TopgunZ

Flutter=chatter. Its not surge on the ace kits it's 100% the bov oscillating. I've said this a bunch of times. It's just audible from the supercharger inlet. I have my custom bov filter on the QRJ plus a filter on the supercharger so it eliminates the audible fluctuations of the bov under a zero vacuum situation.

The intake and filter cannot work on the vortech units. They get positioned too far up and over to get a pipe to them.

I'm sorry, I must have missed you explaining it this way. The installer explained the noise differently to me. Is your custom BOV filter similar to the Vibrant crankcase filter? Would that addition (along with the QRJ) to the system be enough to eliminate the flutter, or is the intake tube and pleated filter contributing to the noise suppression? Are you mounting the BOV filter in a remote location? Are the mounting brackets and the intercooler identical to the ones supplied with the ACE kit (therefore the space between the intercooler and the radiator the same)?

rspray2000 · 04-03-2021, 09:43 PM

Quote:

Originally Posted by TopgunZ

It comes with its own dedicated setrab oil cooler and reservoir. It doesn't require a pump so there isn't any wiring involved. What does this do? Aids in longevity and 50,000 mile oil changes!

Gonna have room for 3 coolers for a 7AT? I see it’s up for preorder on the site now...

TopgunZ · 04-04-2021, 09:33 AM

Quote:

Originally Posted by rspray2000

Gonna have room for 3 coolers for a 7AT? I see it’s up for preorder on the site now...

Depends how big the coolers are. Any pics? And why 3? 2 oil and 1 trans?

rspray2000 · 04-04-2021, 09:48 AM

Quote:

Originally Posted by TopgunZ

Depends how big the coolers are. Any pics? And why 3? 2 oil and 1 trans?

No pics yet, but would be 19 Row for Engine, 19 or 30 Row for AT (I assume I’d need this if installing SC) and whatever size for the ACE. That said, I’m sure a custom bracket wouldn’t be a big deal if I’d be going SC’d. I’ve come to grips that I wouldn’t need my Dewla Air Guide anymore

TopgunZ · 04-05-2021, 08:56 PM

Ran out of time on dyno. We were just making some power.
19psi at 7400rpm with a full filter setup at 1000ft elevation.

Without a filter at sea level revving to 7800, I bet we see 23psi.

Back to the dyno Wednesday.

redondoaveb · 04-05-2021, 08:59 PM

Quote:

Originally Posted by TopgunZ

Ran out of time on dyno. We were just making some power.
19psi at 7400rpm with a full filter setup at 1000ft elevation.

Without a filter at sea level revving to 7800, I bet we see 23psi.

Back to the dyno Wednesday.

It's a good thing you're installing a boost controller

TopgunZ · 04-07-2021, 07:44 PM

Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!!

708whp!
556wtq!
21.5psi!

All at only 7000rpm rev limit!

Stock block!

We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune.

This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard.

This kit will be able to bleed off boost for whatever power you want to make.

Still the most affordable supercharger kit on the market!

Tuned by the best... Eugene Turkov

Get yours here.... www.topgunspeedworks.com

redondoaveb · 04-07-2021, 08:02 PM

Quote:

Originally Posted by TopgunZ

Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!!

708whp!
556wtq!
21.5psi!

All at only 7000rpm rev limit!

Stock block!

We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune.

This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard.

This kit will be able to bleed off boost for whatever power you want to make.

Still the most affordable supercharger kit on the market!

Tuned by the best... Eugene Turkov

Get yours here.... www.topgunspeedworks.com

Great numbers, especially with a filter. Are you going to do a 17 psi dyno run?

Birdiev · 04-08-2021, 04:53 AM

How do I order this on website? All I see is the ace kit.

DaveZ03 · 04-08-2021, 07:34 AM

Quote:

Originally Posted by Birdiev

How do I order this on website? All I see is the ace kit.

Direct Link: https://www.topgunspeedworks.com/nis...percharger-kit

NissanTracker · 04-08-2021, 08:45 AM

Damn... looks at that torque line, so much low to mid range power! Lots of fun factor right there without having to go TT's.

Jayhovah · 04-08-2021, 09:16 AM

Smells like alotta folks are about to go boosted.

VHRpurr · 04-08-2021, 09:24 AM

Quote:

Originally Posted by Jayhovah

Smells like alotta folks are about to go boosted.

Yeeees sir. I’m contemplating this or an FI TT setup only because the wife drives the car and she has never driven a single turbo car, only TT and SC. The more linear power curve will make it a lot easier for her to adapt. Decisions decisions....

Need video clips of this kit! Siiiick.

TopgunZ · 04-08-2021, 10:08 AM

The best part....we are barely scratching the surface of this kits capability.

I have a video clip on FB.

JARblue · 04-08-2021, 10:31 AM

Got any videos to share with people who aren't on FB or IG?

04-05-2021, 08:56 PM	#95 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Ran out of time on dyno. We were just making some power. 19psi at 7400rpm with a full filter setup at 1000ft elevation. Without a filter at sea level revving to 7800, I bet we see 23psi. Back to the dyno Wednesday. EZT, Rusty, ZontheRocks and 2 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-07-2021, 07:44 PM	#97 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Topgun Speedworks ROTREX kit release!!! With a FULL FILTER!! 708whp! 556wtq! 21.5psi! All at only 7000rpm rev limit! Stock block! We ran out of injector. We were at 107% injector duty cycle at 7000rpm. Conservative tune. This kit will hit 23+psi and make 750whp pretty easily with more fuel. With a full filter! We need a built motor to see what happens with a turboguard. This kit will be able to bleed off boost for whatever power you want to make. Still the most affordable supercharger kit on the market! Tuned by the best... Eugene Turkov Get yours here.... www.topgunspeedworks.com scratchdvinyl, JARblue, Rusty and 7 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-08-2021, 08:45 AM	#101 (permalink)
NissanTracker Track Member Join Date: Jun 2016 Location: Massachusetts Posts: 724 Drives: 07' Nismo, 14' Nismo Rep Power: 29261	Damn... looks at that torque line, so much low to mid range power! Lots of fun factor right there without having to go TT's. DaveZ03 likes this. Last edited by NissanTracker; 04-08-2021 at 08:57 AM.

04-08-2021, 10:08 AM	#104 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	The best part....we are barely scratching the surface of this kits capability. I have a video clip on FB. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-08-2021, 10:31 AM	#105 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Got any videos to share with people who aren't on FB or IG? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-08-2021, 04:53 AM	#99 (permalink)
Birdiev Base Member Join Date: Nov 2020 Location: Texas Posts: 21 Drives: G37 Rep Power: 4	How do I order this on website? All I see is the ace kit.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Rotrex C38R Supercharger	R3drckt09	Forced Induction	145	02-05-2023 08:37 AM
rotrex c38r spec sheet	tiller	Forced Induction	11	09-13-2018 11:57 AM
Rotrex C38R & are HR/VHR GTM SC mounting brackets the same?	SS_Firehawk	Engine & Drivetrain	6	02-09-2018 10:33 PM
Replacement Rotrex Supercharger for the GTM Stage 1 kit	wind.zero	Forced Induction	29	06-03-2014 06:20 AM
[FOR SALE] Rotrex C38-81 Supercharger Only	pokeyl	Parts for sale (Private Classifieds)	3	02-17-2014 09:07 AM

***Topgunz ROTREX C38R Supercharger Kit***

Topgunz ROTREX C38R Supercharger Kit