Any Supporting Mods I am missing for my Turbo build?

Randomizer23

Hm. I was gonna go with a local place that have built VQ's in the past. Now I don't know. I feel it would be easier with the local place due to convince but not sure how well they can do it. The place is GBP - Home

Spooler

I would suggest you do some more research. Not saying that they are a bad place, because I don't know. You need to learn what questions you need to ask.

Randomizer23

Makes sense I understand thanks.

JARblue

Go with a proven shop - there's only a handful around. It doesn't matter how close to home your shop is if they fvck your shìt up

__________________

Spooler

That's true, doing it twice sure is expensive. I know Mazworx ships to Canada. They have a drift customer from there with a 980hp billet DE VQ.

Randomizer23

I emailed them I got quoted 15k for the motor. It is their stage 2.5 long block for the vhr. My local shop is quoting me 13k CAD including labour. He says he has done multiple vq's and the VR38DETT up to 1000whp. 15k is quite alot honestly but im worried I may have to get a second motor if my local one blows.

Rusty

Spend the money and only do it once.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Randomizer23

You are most likely 100% Right but 15k usd is around 20k CAD. I will need to put the built motor off for a bit until I have the money.

Spooler

I will put it to you this way. If the first motor tanks, nobody else will want to fix it. You will have to buy a junkyard long block and start over. I started with a junkyard long block and still had my stock one at the house. Once Darton MID sleeves are machined in, no other shop will want to take on the challenge of fixing someone elses screw up.

Randomizer23

Hey what about IPP's longblocks? Any good?

Spooler

Junk

Spooler

You still need a Suckerpunch oil pump and JWT C2 cams. Tack some more money on.