BP custom manifold for Z1 CMC kit

Boosted Performance

I hear you. I am working on some improvements with the intake. It will require aftermarket engine mounts, and the relocation of the oil filter...so additional cost.

I am hoping to move the filter up, so it sits on the passenger side, just above the sway bar. Something like this:








That's with a 3.5" intake pipe, which I think is a bit too tight of a fit. The final version will be 3", but for the most part a straight shot...couple of 15* bends.


As you guys already know, there is only so much room on these cars, and adding a turbo kit is a challenge at best. With other kits, you have to remove the windshield washer reservoir, and pull the bumper off for air filter servicing. Each manufacturer has the same challenges.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg