BP custom manifold for Z1 CMC kit

jax4557

In for motor mount that allows forward air filter placement!

__________________
BP Precision 6766 - E85 - 620hp / 550tq

Boosted Performance

Yeah, I'll do my best to figure something out.

The challenge is the sway bar, and the alternator. They take up a lot of valuable space in that area. So if I push the filter forward, I am not sure how much room I'll end up with. May need a custom filter (and I have made some inquiries about that as well).

The one thing that could potentially be gained from a different engine mount is that the oil filter could maybe stay in the OEM location. It would have to be pulled off for air filter servicing, but that isn't a big deal since it is replaced frequently enough.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Jinxx

I was thinking that the pipe could be ran just past the sway bar with a 90 bend and the filter would sit basically along side of the sway bar ....to change it would only require taking out the 4 bolts to the sway bar letting it drop down ,this would give access to change...also allowing the oil filter to stay in OEM location

Boosted Performance

Tried it already




That's a full 3.5" intake, but I don't like the 90 degree there. There isn't as much room there as one may think...which was disappointing.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg

Jinxx

LOL well then ....shot my boat full of holes......oh well turbo guard then LOL