Fast Intentions Stage 2 TT build by MA-Motorsports.

Spooler · 10-27-2021, 01:59 PM

All I know is I am not going for round 4. Round 3 is going to need to be proven. We all know who has proven that. That's all I have to say about that. If I hurt some peoples feelings, nothing I can do about it.

Spooler · 10-28-2021, 09:50 AM

If I hear " I am sorry your motor didn't hold" or " I don't understand, it should have held" or etc, etc, etc. I am going to hurt somebody.

SeeThruHead · 10-28-2021, 09:10 PM

you can mod them a little at least...

Spooler · 10-29-2021, 02:00 PM

I have no choice but to go this route.

https://www.enginebuildermag.com/202...gh-horsepower/

Rusty · 10-29-2021, 02:26 PM

Quote:

Originally Posted by Spooler

I have no choice but to go this route.

https://www.enginebuildermag.com/202...gh-horsepower/

Use the same idea on high pressure steam piping joints. A one piece stainless tube circle set in a groove that is on both sides.

The o-rings of years past was made from copper. Known a few that used them.

Spooler · 10-29-2021, 02:33 PM

I have to pay for my engine to be R&R'd and the retune. I can't take the chance that whatever Mazworx does works or may not work. If it does not, I have to pay for the R&R again. This is my last attempt. I am putting the best I can find in it, period. SOHO will be doing the refresh with their TKM top fuel hoops. Just the way it is.

redondoaveb · 10-29-2021, 03:29 PM

Quote:

Originally Posted by Spooler

I have to pay for my engine to be R&R'd and the retune. I can't take the chance that whatever Mazworx does works or may not work. If it does not, I have to pay for the R&R again. This is my last attempt. I am putting the best I can find in it, period. SOHO will be doing the refresh with their TKM top fuel hoops. Just the way it is.

Sounds like the right move going with SOHO top fuel hoops. It sure looks like that's solved the issue

Spooler · 10-29-2021, 03:50 PM

Quote:

Originally Posted by redondoaveb

Sounds like the right move going with SOHO top fuel hoops. It sure looks like that's solved the issue

It is not only that, they will stand behind their work 100%.

redondoaveb · 10-29-2021, 04:09 PM

Quote:

Originally Posted by Spooler

It is not only that, they will stand behind their work 100%.

Spooler · 10-29-2021, 03:55 PM

I have been promised the moon but I keep getting Skittles. WTH....

JARblue · 10-29-2021, 08:31 PM

Quote:

Originally Posted by Spooler

I have been promised the moon but I keep getting Skittles. WTH....

Feel the rainbow...

... taste the rainbow!

Spooler · 10-29-2021, 08:49 PM

Quote:

Originally Posted by JARblue

Feel the rainbow...

... taste the rainbow!

Now you get my humor. LMAO!!!!

Rusty · 10-29-2021, 09:31 PM

Quote:

Originally Posted by Spooler

Now you get my humor. LMAO!!!!

............no one knew you had humor...........everyone thought that you was a stick in the mud...........

SeeThruHead · 10-30-2021, 10:32 AM

FWIW
SCE Gaskets tells me they are working on a vulcan gasket for the vq37

Quote:

Hello Shane,

Engineering has this project and it is being reviewed now. Things slowed a bit as we couldn’t get a right side OE gasket, but we have one on the way as of last week, so the project will move forward again and hopefully be finished up in the next 30 – 45 days.

Thanks,

of course, even after its made it's untested.

Spooler · 10-30-2021, 08:38 PM

Quote:

Originally Posted by SeeThruHead

FWIW
SCE Gaskets tells me they are working on a vulcan gasket for the vq37

of course, even after its made it's untested.

Good luck with that. I am done testing for other folks. They need to test on their own car and then tell everyone else how it does without hiding the results.

10-28-2021, 09:50 AM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,058 Drives: 2013 Nismo 370z Rep Power: 2684393	If I hear " I am sorry your motor didn't hold" or " I don't understand, it should have held" or etc, etc, etc. I am going to hurt somebody. Last edited by Spooler; 10-28-2021 at 09:55 AM.

10-28-2021, 09:10 PM	#3 (permalink)
SeeThruHead Track Member Join Date: Jun 2020 Location: Toronto Posts: 716 Drives: Red '18 Sport Manual Rep Power: 23499	you can mod them a little at least... __________________ My Build thread STH Build Plan Thread Images too big fix here

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM

10-27-2021, 01:59 PM	#1 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,058 Drives: 2013 Nismo 370z Rep Power: 2684393	All I know is I am not going for round 4. Round 3 is going to need to be proven. We all know who has proven that. That's all I have to say about that. If I hurt some peoples feelings, nothing I can do about it.

10-29-2021, 02:00 PM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,058 Drives: 2013 Nismo 370z Rep Power: 2684393	I have no choice but to go this route. https://www.enginebuildermag.com/202...gh-horsepower/

10-29-2021, 02:33 PM	#6 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,058 Drives: 2013 Nismo 370z Rep Power: 2684393	I have to pay for my engine to be R&R'd and the retune. I can't take the chance that whatever Mazworx does works or may not work. If it does not, I have to pay for the R&R again. This is my last attempt. I am putting the best I can find in it, period. SOHO will be doing the refresh with their TKM top fuel hoops. Just the way it is.

10-29-2021, 03:55 PM	#10 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,058 Drives: 2013 Nismo 370z Rep Power: 2684393	I have been promised the moon but I keep getting Skittles. WTH....