Fast Intentions Stage 2 TT build by MA-Motorsports.

Hotrodz · 03-14-2018, 11:49 PM

The thing is most people want all the power and thrill of high performance without the cost or issues that comes with high performance and running on the ragged edge. Very few are will and committed and for the builder/tuner/shop there are no accolades for engine failures by most even though they are doing what the customer wants and if there is not that loyalty between the two, the consequences are always greater for the one doing the build.

What is interesting is that I see as many issues or more with those that stay NA, the only difference is how much you are willing to pay!

Streetz · 03-15-2018, 12:32 PM

I would take a stock engine at 750whp over built motor at 750whp any day of the week, especially if your not doing all the work yourself. Proper tuning and I personally think 750 on the stock engine is a better advantage for most people. The average person doesn't understand the theories of fasteners and engine building to get a built motor to last that long. From what i see in this community people are fed false information and they don't put the time or effort into the proper building principles. No shop wants to build a 1000whp car because they cant make money off the things needed for R&D ect. They would make no money. The Z community doesn't have the enough volume to waist there time for R&D. The gtr community is so far ahead because there are 1000's of 1000hp builds already so they know exactly what happens at that power and what needs to be obtained for reliability.

Hotrodz · 03-15-2018, 01:31 PM

Quote:

Originally Posted by Streetz

I would take a stock engine at 750whp over built motor at 750whp any day of the week, especially if your not doing all the work yourself. Proper tuning and I personally think 750 on the stock engine is a better advantage for most people. The average person doesn't understand the theories of fasteners and engine building to get a built motor to last that long. From what i see in this community people are fed false information and they don't put the time or effort into the proper building principles. No shop wants to build a 1000whp car because they cant make money off the things needed for R&D ect. They would make no money. The Z community doesn't have the enough volume to waist there time for R&D. The gtr community is so far ahead because there are 1000's of 1000hp builds already so they know exactly what happens at that power and what needs to be obtained for reliability.

I don't know if there are thousands of 1k whp gtrs out there as much as those folks have the money to pay for r&d. You are dealing with a totally different demographic than the majority of Z owners! I love the gtr for what is but it's mostly a pecker swinging contest even with those that track their car. I have more positive interactions with Porsche owners than gtr owners.

Back on topic...so what is the next shiny thing you need?

Sent from my SM-N910P using Tapatalk

Spooler · 03-15-2018, 02:58 PM

Quote:

Originally Posted by Hotrodz

I have more positive interactions with Porsche owners than gtr owners.

That is why I don't have one or want one. I thought about it and quickly came to my senses. No thanks.

Spooler · 03-15-2018, 03:09 PM

Quote:

Originally Posted by Streetz

I would take a stock engine at 750whp over built motor at 750whp any day of the week, especially if your not doing all the work yourself.

I don't think that is always the case. There are some shops that do outstanding work. I haven't had someone else work on my car in years. This will be the first time in a long time. I am just not physically able to do the big stuff anymore. I can, but I will pay for it in kind. I have confidence that I have chosen Wisely. Only two shops would I trust to do it. One is on the East coast and one is on the West coast. But that is just my .02.

Hotrodz · 03-15-2018, 03:47 PM

Quote:

Originally Posted by Spooler

That is why I don't have one or want one. I thought about it and quickly came to my senses. No thanks.

Streetz · 03-15-2018, 03:48 PM

There are definitely shops out there that are capable of it. Just very few.

GTR is lame for the most part and definitely a "pecker swinger" car.

jchammond · 03-15-2018, 05:18 PM

Quote:

Originally Posted by Streetz

There are definitely shops out there that are capable of it. Just very few.

GTR is lame for the most part and definitely a "pecker swinger" car.

Agreed on the “Pecker-Swinger” ,,, as being over 50 w/good driving record & good credit;
I got quoted $525.00 per month for car insurance alone! And in SC we have those yearly property taxes on vehicles (pending value)... so add another 2-4,000 per year & that’s 8-10K yearly,just to sit in the front yard,,,no thanks!

Sales@F.I. Inc. · 03-15-2018, 05:28 PM

Glad to have you "on board" Spooler.

Can't wait to see how the project turns out.

- Kevin

Spooler · 03-15-2018, 07:37 PM

Quote:

Originally Posted by Sales@F.I. Inc.

Glad to have you "on board" Spooler.

Can't wait to see how the project turns out.

- Kevin

It's like Christmas when you were a kid and didn't know who was really Santa Claus. You put a parts list together and think " I should be able to make this Hp/Tq". The crazy part is you may make that number or you may not. You may make much more than what is expected. You just don't know until it is done. So, it's like Christmas morning. I have a long time to wait though. No doubt I have my Sears and Roebuck Wish book out dog earing pages and making a list whilst checking it twice.

Spooler · 03-17-2018, 10:35 PM

Quote:

Originally Posted by Rid3_FaM0uS

Remember that rabbit hole the guys kept telling you about? You can find me down there.
Way.
Way.
Down there (if you know what I mean). Until I no longer have the desire to do so... I will ALWAYS push this platform. Further, bigger, badder.

One more question. Did you heat cycle the engine and tear it back apart to re-torque the head studs? That is the most important thing in the diesel world to keep a head gasket sealed up tight when using ARP studs. Many folks had failures if they left off this step. The ARP 425 could take 3 heat cycles before they wouldn't move any more. That is why ARP came out with 625's, they only need one heat cycle and re-torque.

Spooler · 03-17-2018, 10:40 PM

This guy came up with a unique way of heat cycling a 2JZ. You would have to do something similar with our engines or it would be a complete pain in the butt.

blueranger · 03-24-2018, 12:37 AM

Quote:

Originally Posted by Rid3_FaM0uS

My high compression 930whp RJM closed deck engine was running like a champ when it let go, and there’s not a doubt in my mind at all that it would still be going strong had I not suffered severe con rod failures that led to a total loss of the engine.

Sorry to hear... What rod brand?

Spooler · 03-27-2018, 01:20 PM

Talked with Ray at MA-Motorsports today. Nice fellow. I told him I have a 1975 Datsun 280zt. He wants to work on that car. Maybe one day he will. I need a standalone ECU for it. It is tuned old school which leaves a lot to be desired. That is a build thread for a different date.

jchammond · 03-27-2018, 07:16 PM

Quote:

Originally Posted by Spooler

Talked with Ray at MA-Motorsports today. Nice fellow. I told him I have a 1975 Datsun 280zt. He wants to work on that car. Maybe one day he will. I need a standalone ECU for it. It is tuned old school which leaves a lot to be desired. That is a build thread for a different date.

There's your V8 Drag Car!

03-14-2018, 11:49 PM	#91 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	The thing is most people want all the power and thrill of high performance without the cost or issues that comes with high performance and running on the ragged edge. Very few are will and committed and for the builder/tuner/shop there are no accolades for engine failures by most even though they are doing what the customer wants and if there is not that loyalty between the two, the consequences are always greater for the one doing the build. What is interesting is that I see as many issues or more with those that stay NA, the only difference is how much you are willing to pay! Rid3_FaM0uS likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-15-2018, 12:32 PM	#92 (permalink)
Streetz Base Member Join Date: Aug 2015 Location: Chicago Posts: 59 Drives: 2011 370zTT 818whp Rep Power: 9	I would take a stock engine at 750whp over built motor at 750whp any day of the week, especially if your not doing all the work yourself. Proper tuning and I personally think 750 on the stock engine is a better advantage for most people. The average person doesn't understand the theories of fasteners and engine building to get a built motor to last that long. From what i see in this community people are fed false information and they don't put the time or effort into the proper building principles. No shop wants to build a 1000whp car because they cant make money off the things needed for R&D ect. They would make no money. The Z community doesn't have the enough volume to waist there time for R&D. The gtr community is so far ahead because there are 1000's of 1000hp builds already so they know exactly what happens at that power and what needs to be obtained for reliability. Rusty and EliteXpress like this.

03-15-2018, 03:48 PM	#97 (permalink)
Streetz Base Member Join Date: Aug 2015 Location: Chicago Posts: 59 Drives: 2011 370zTT 818whp Rep Power: 9	There are definitely shops out there that are capable of it. Just very few. GTR is lame for the most part and definitely a "pecker swinger" car. Rid3_FaM0uS, Hotrodz and Spooler like this. Last edited by Streetz; 03-15-2018 at 03:51 PM.

03-15-2018, 05:28 PM	#99 (permalink)
Sales@F.I. Inc. The370Z.com Sponsor Join Date: Feb 2013 Location: Simi Valley, Ca. Posts: 426 Drives: 2008 G37S Coupe Rep Power: 9218	Glad to have you "on board" Spooler. Can't wait to see how the project turns out. - Kevin Hotrodz, Spooler and jchammond like this. __________________ *Follow us on Facebook: Fast Intentions Inc. / Instagram: @FastIntentions* Phone: (805) 522-FAST (3278) Email: kevin@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

03-17-2018, 10:40 PM	#102 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	This guy came up with a unique way of heat cycling a 2JZ. You would have to do something similar with our engines or it would be a complete pain in the butt. blueranger likes this.

03-27-2018, 01:20 PM	#104 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,512 Drives: 2013 Nismo 370z Rep Power: 2684391	Talked with Ray at MA-Motorsports today. Nice fellow. I told him I have a 1975 Datsun 280zt. He wants to work on that car. Maybe one day he will. I need a standalone ECU for it. It is tuned old school which leaves a lot to be desired. That is a build thread for a different date. Rusty, Hotrodz and jchammond like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM