Fast Intentions Stage 2 TT build by MA-Motorsports.

jchammond · 05-01-2019, 05:35 AM

Quote:

Originally Posted by Spooler

I have no idea. I didn't message or call them today. Will do the same tomorrow, etc. I am going to Zdayz and have fun. Call me when it's fixed. I need a vacation. Only question I have for them is this, "Do you need a match"....

What am I gonna do with these XL “Depends”

I can bring them for Russ

Rusty · 05-01-2019, 08:02 AM

Quote:

Originally Posted by jchammond

What am I gonna do with these XL “Depends”

I can bring them for Russ

They're too big for me. You can save them for later.

Spooler · 05-01-2019, 09:12 AM

Quote:

Originally Posted by jchammond

What am I gonna do with these XL “Depends”

I can bring them for Russ

I am sure you will need them for the Vette ride. LOL

URBiN~HURMiT · 04-30-2019, 10:17 PM

Quote:

Originally Posted by Spooler

Houston, we have a problem. The tuning was going well last Friday at 10-11psi of boost. Making in the 550hp range. He then started to turn up the boost and the motor didn't respond. Turned it up 5psi of boost and it only made 5 more hp. So, Carl stopped and pulled the car off the dyno. They will be doing a bunch of double checks on the timing today. I hope they find the issue. Building and modifying cars is not always peaches and creme. SNAFU, it is my car. This is par for the coarse. I may not make it to Zdayz with it. No worries, plan B will be implemented. Not real happy at the moment but sheit happens.

Mine made about 500 whp (don't have the exact number) on 11 ~ 13 lbs of boost on pump gas with the Borg Warner 71/63's
Again, sorry I don't have the exact numbers - Daelen had relayed this info to me from his recollection of a conversation with Carl when he was doing the pump gas Tune.

Daelen also told me that they stop increasing the boost when it makes less than 10 whp per 1 lb of boost increase.

The law of diminishing returns --- no significant performance gain but the risk to the motor significantly increases.

I'm still dialing in the car (and my driving skills) on pump gas before I go E85.

sirnixalot · 04-30-2019, 10:12 AM

Sorry to hear that, hang in there man, you know it will be worth it in the end

Spooler · 04-30-2019, 10:22 AM

Quote:

Originally Posted by sirnixalot

Sorry to hear that, hang in there man, you know it will be worth it in the end

Yeah, I should have bought a 2019 ZR1 Corvette and called it a day.

JARblue · 05-01-2019, 08:59 PM

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers

And it's messy af. Have you seen Fargo?

Spooler · 05-01-2019, 10:34 PM

Quote:

Originally Posted by JARblue

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers

And it's messy af. Have you seen Fargo?

Enough with the hog posts. LOL I shouldn't have mentioned it to you characters.

Rusty · 05-01-2019, 10:37 PM

Quote:

Originally Posted by Spooler

Enough with the hog posts. LOL I shouldn't have mentioned it to you characters.

Rusty · 05-01-2019, 10:37 PM

Quote:

Originally Posted by JARblue

I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them.

If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers

And it's messy af. Have you seen Fargo?

That's what I had in mind. Only direct the discharge into the hog pen.

URBiN~HURMiT · 05-02-2019, 10:58 PM

Quote:

Originally Posted by Rusty

That's what I had in mind. Only direct the discharge into the hog pen.

Remind me not to come to a BBQ if you invite me ...

Rusty · 05-02-2019, 11:07 PM

Quote:

Originally Posted by URBiN~HURMiT

Remind me not to come to a BBQ if you invite me ...

I only do that when I'm hiding the dead bodies. I don't let the pile get too big.

Spooler · 05-02-2019, 08:31 AM

Timing chains are good to go. Checking VVEL now.

solidus · 05-02-2019, 10:02 AM

Quote:

Originally Posted by Spooler

Timing chains are good to go. Checking VVEL now.

You do realize if the VVEL solenoids are off thats me doing a Jedi mind trick on you.
They got my diff set up and dammit if the Z1 cover isn't a problem with the Motordyne exhaust. Has to have fins shaved.

Spooler · 05-02-2019, 11:18 AM

Quote:

Originally Posted by solidus

You do realize if the VVEL solenoids are off thats me doing a Jedi mind trick on you.
They got my diff set up and dammit if the Z1 cover isn't a problem with the Motordyne exhaust. Has to have fins shaved.

You mean the VVEL motors? My car has more of a lope than it should. I am thinking they are off. Guess they will find out when they check them.

04-30-2019, 10:12 AM	#5 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57455	Sorry to hear that, hang in there man, you know it will be worth it in the end __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

05-01-2019, 08:59 PM	#7 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	I was just clarifying ... if you want your pigs to be able to continue to devour human corpses efficiently then you'll want to shave the excess hair and remove the teeth before feeding them. If you use a wood chipper, then of course it can handle everything. But you'll still have a lot of leftovers And it's messy af. Have you seen Fargo? __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Fast Intentions Stage 2 Twin Turbo Kit	Nik@SOHO	Parts for sale (Private Classifieds)	60	10-09-2017 08:11 AM
370Z For Sale 2015 Nismo Tech with Fast Intentions Stage 2 637HP	DPE G	370Z For Sale	2	06-03-2017 11:40 AM
MA Motorsports: FAST Intentions \| HKS \| APEXi \| TANABE	MAMotorsports	Exhaust/Intake	46	05-23-2016 11:12 AM
My 09 NISMO Fast Intentions TT Build	katjmmx	Forced Induction	142	05-19-2016 02:32 PM
[FOR SALE] Fast Intentions Exhaust Build #952 Placement	NismoZ70	Parts for sale (Private Classifieds)	11	03-19-2014 09:27 AM

05-02-2019, 08:31 AM	#13 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,120 Drives: 2013 Nismo 370z Rep Power: 2684394	Timing chains are good to go. Checking VVEL now.