RJ MFG Supercharger kit Feeler...

bullitt5897 · 04-05-2018, 06:32 PM

They have not released any numbers yet. Everything is spec’d for the end user not to have to rebuild the kit if they want to go big. The new 175ax V3 has already proven itself capable enough to flow the required CFM to make 1000hp+. The intercooler was designed in conjunction with bell intercooler a for applications reaching 1200whp+. The heat exchanger also from bell intercoolers was codesigned to support 1200whp+. The meizere water pump is 100% billet and spec’d to support up to 1000whp+.

No one has posted any final numbers on the kits capabilities. The new V3 was purchased specifically because of its added efficiency. The unit in the picture is a High Pressure unit capable of well over 20psi. With the right engine setup there is no question in my mind that it will hit 1000hp+. There is already a car at RJM getting the stage 2 kit once testing is done. Fully built motor and 7at trans! The car already has the suspension setup for drag racing.

daveb91 · 04-07-2018, 10:18 AM

Wish this would of been a rotrex kit... it probably would have been done by now

bullitt5897 · 04-07-2018, 10:13 PM

Quote:

Originally Posted by daveb91

Wish this would of been a rotrex kit... it probably would have been done by now

Rotrex don’t flow enough CFM for what we want to do.

milkcow500 · 04-07-2018, 10:34 PM

The new Rotrex C38R actually looks pretty nice. I believe it's a direct replacement for people with the GTM kits.

nomodsjk · 04-12-2018, 01:19 PM

Quote:

Originally Posted by Elmo370z

Big talk. When we see this kit reach 1000whp from people not affliated with RJm and yourself then it’s legit, until then it’s all just paper weight. Good luck with this unit, I’m excited to see the fruits of you guy’s labor.

Well I'm in no way affiliated with rjm and I've thrown everything possible at this project including the kitchen sink so hopefully we'll see what this kit is capable of when my car gets done. I'll definitely be posting the dyno results for all to see no matter what the outcome is

Chuck33079 · 04-12-2018, 02:36 PM

Quote:

Originally Posted by nomodsjk

Well I'm in no way affiliated with rjm and I've thrown everything possible at this project including the kitchen sink so hopefully we'll see what this kit is capable of when my car gets done. I'll definitely be posting the dyno results for all to see no matter what the outcome is

When do you get your car back?

bullitt5897 · 04-12-2018, 07:42 PM

His car will be at zdayz.

Elmo370z · 04-12-2018, 08:31 PM

Quote:

Originally Posted by nomodsjk

Well I'm in no way affiliated with rjm and I've thrown everything possible at this project including the kitchen sink so hopefully we'll see what this kit is capable of when my car gets done. I'll definitely be posting the dyno results for all to see no matter what the outcome is

O I know. We talked last year when your were getting your car tuned before z days. I’m wishing you the best of luck and this kit produces and doesn’t give you any issues

Spooler · 04-12-2018, 11:46 PM

Quote:

Originally Posted by bullitt5897

His car will be at zdayz.

Is your car going to be there?

bullitt5897 · 04-13-2018, 01:49 PM

Quote:

Originally Posted by Spooler

Is your car going to be there?

Yes it will.

2SIC4U · 04-17-2018, 02:23 PM

Quote:

Originally Posted by nomodsjk

Well I'm in no way affiliated with rjm and I've thrown everything possible at this project including the kitchen sink so hopefully we'll see what this kit is capable of when my car gets done. I'll definitely be posting the dyno results for all to see no matter what the outcome is

So will your car finally be ready for ZDayZ this year since the whipple wasn't ready for last years?

nomodsjk · 04-18-2018, 04:13 PM

Quote:

Originally Posted by 2SIC4U

So will your car finally be ready for ZDayZ this year since the whipple wasn't ready for last years?

Yes it will be there but it will be the stage one kit. After zdays the car goes back to rjm so they can install my 4.3 block and upgraded trans.

cupcakez · 04-18-2018, 05:05 PM

Quote:

Originally Posted by nomodsjk

Yes it will be there but it will be the stage one kit. After zdays the car goes back to rjm so they can install my 4.3 block and upgraded trans.

Where did you get your upgraded trans from?
A level10 trans or from somewhere else?

bullitt5897 · 04-18-2018, 05:22 PM

Quote:

Originally Posted by 2SIC4U

So will your car finally be ready for ZDayZ this year since the whipple wasn't ready for last years?

Yes his car will be there. He will be running the preproduction stage 1 kit. After zdayz he will be upgraded for the stage 2 kit.

MadSciSnails · 04-18-2018, 07:36 PM

Not exactly related, but how many years in advance do you need to book zdayz? The wife tried to book us in July and everything on site was booked already.

Sent from another dimension.

View Poll Results: What kind of Supercharger kit would you like us to make?
Rotrex C38 based system	54	23.79%
Vortech/Procharger Based Kit	40	17.62%
Whipple Positive Displacement Roots Kit	109	48.02%
I dont want a supercharger.	24	10.57%
Voters: 227. You may not vote on this poll

04-05-2018, 06:32 PM	#1021 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	They have not released any numbers yet. Everything is spec’d for the end user not to have to rebuild the kit if they want to go big. The new 175ax V3 has already proven itself capable enough to flow the required CFM to make 1000hp+. The intercooler was designed in conjunction with bell intercooler a for applications reaching 1200whp+. The heat exchanger also from bell intercoolers was codesigned to support 1200whp+. The meizere water pump is 100% billet and spec’d to support up to 1000whp+. No one has posted any final numbers on the kits capabilities. The new V3 was purchased specifically because of its added efficiency. The unit in the picture is a High Pressure unit capable of well over 20psi. With the right engine setup there is no question in my mind that it will hit 1000hp+. There is already a car at RJM getting the stage 2 kit once testing is done. Fully built motor and 7at trans! The car already has the suspension setup for drag racing. blueranger likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

04-07-2018, 10:34 PM	#1024 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 44	The new Rotrex C38R actually looks pretty nice. I believe it's a direct replacement for people with the GTM kits. daveb91 and wideglideleon like this.

04-12-2018, 07:42 PM	#1027 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	His car will be at zdayz. nomodsjk likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 03:57 AM
[FOR SALE] [Feeler] GTM Stage 1.5 Supercharger Kit	AntiVenom	Parts for sale (Private Classifieds)	19	06-01-2016 02:49 PM
Available soon! FEELER	Rayzz	Parts for sale (Private Classifieds)	7	06-23-2015 01:00 PM
[FOR SALE] Feeler	DEpointfive0	Parts for sale (Private Classifieds)	27	01-13-2015 12:18 PM

04-07-2018, 10:18 AM	#1022 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 26	Wish this would of been a rotrex kit... it probably would have been done by now

04-18-2018, 07:36 PM	#1035 (permalink)
MadSciSnails Base Member Join Date: Aug 2016 Location: Columbia MS Posts: 121 Drives: '14 370z, 94 300zxTT Rep Power: 9	Not exactly related, but how many years in advance do you need to book zdayz? The wife tried to book us in July and everything on site was booked already. Sent from another dimension.