RJ MFG Supercharger kit Feeler...

bullitt5897 · 12-15-2017, 09:33 PM

Operation 2 is the bottom half.

RJ MFG · 12-16-2017, 04:23 PM

Friday night Update:

Few more passes to go on the top side then we jump to the bottom side and finish the lower plenum.

TechnicZ · 12-16-2017, 05:39 PM

[QUOTE=RJ MFG;3715441]Friday night Update:

Looking great. My concern with it (even though it's a first prototype) is the seats where the bolts or nuts will be sitting... Is there enough room for a standard 1/4 or 3/8 10mm socket to fit in there to get the proper amount of torque on the nut/bolt. I think Nissan's stock TQ with that plenum is around 16ft/lbs or something.

RJ MFG · 12-16-2017, 05:51 PM

[QUOTE=TechnicZ;3715461]

Quote:

Originally Posted by RJ MFG

Friday night Update:

Looking great. My concern with it (even though it's a first prototype) is the seats where the bolts or nuts will be sitting... Is there enough room for a standard 1/4 or 3/8 10mm socket to fit in there to get the proper amount of torque on the nut/bolt. I think Nissan's stock TQ with that plenum is around 16ft/lbs or something.

That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this in the shortest amount of time and ease of serviceability. You can thank bullitt for that. He was like a bulldog on those features! Our estimate as of right now based on using our 3d printed units is a 4 hour install.

TechnicZ · 12-17-2017, 06:24 PM

[QUOTE=RJ MFG;3715463]

Quote:

Originally Posted by TechnicZ

That is the injector ports. Injectors we will be supplying with the kit. Everything bolts from the inside. A lot of time and consideration went in to how to install this in the shortest amount of time and ease of serviceability. You can thank bullitt for that. He was like a bulldog on those features! Our estimate as of right now based on using our 3d printed units is a 4 hour install.

Well i definitely feel silly, I circled the wrong holes

Thanks for the reassurance!

RJ MFG · 12-16-2017, 05:38 PM

Top side is finished. Now we flip it over and finish the bottom and runners!

gbrettin · 12-16-2017, 09:33 PM

Looking good!

Sent from my SM-G930P using Tapatalk

RJ MFG · 12-19-2017, 07:17 PM

UPDATE:

We are cutting the second unit tonight at a faster speed (closer to production speed). We are focusing on the first operation (top side). And should have it done no later than Friday. We hope to have both units completed by Friday and starting on the (FRS) Fuel Rail Stack. This stack should go fairly quickly as it is mainly 3 axis work and contains all our ports. We will post up pictures later this week.

RJ MFG · 12-19-2017, 07:19 PM

Rusty · 12-19-2017, 07:23 PM

Looks nice so far.

A lot of us don't do facebook. If you post anything there and not here. We would never know.

RJ MFG · 12-19-2017, 07:53 PM

Quote:

Originally Posted by Rusty

Looks nice so far.

A lot of us don't do facebook. If you post anything there and not here. We would never know.

That's why we are posting the pictures here.

Rusty · 12-19-2017, 08:12 PM

Quote:

Originally Posted by RJ MFG

That's why we are posting the pictures here.

cooltoy · 12-19-2017, 07:31 PM

Quote:

RJM Supercharger update:

RJM Supercharger teamed up with the best...Bell Intercoolers!!

This intercooler will support over 1000 hp with the Bell heat exchanger.

Enjoy

RJ MFG · 12-19-2017, 09:59 PM

getting a little ahead of schedule

Preview of the rough Fuel Rail Stack:

Senna-F1 · 12-19-2017, 10:18 PM

Quote:

Originally Posted by RJ MFG

getting a little ahead of schedule

View Poll Results: What kind of Supercharger kit would you like us to make?
Rotrex C38 based system	54	23.79%
Vortech/Procharger Based Kit	40	17.62%
Whipple Positive Displacement Roots Kit	109	48.02%
I dont want a supercharger.	24	10.57%
Voters: 227. You may not vote on this poll

12-15-2017, 09:33 PM	#1 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Operation 2 is the bottom half. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

12-16-2017, 04:23 PM	#2 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 285	Friday night Update: Few more passes to go on the top side then we jump to the bottom side and finish the lower plenum. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

12-16-2017, 05:38 PM	#6 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 285	Top side is finished. Now we flip it over and finish the bottom and runners! __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

12-19-2017, 07:17 PM	#8 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 285	UPDATE: We are cutting the second unit tonight at a faster speed (closer to production speed). We are focusing on the first operation (top side). And should have it done no later than Friday. We hope to have both units completed by Friday and starting on the (FRS) Fuel Rail Stack. This stack should go fairly quickly as it is mainly 3 axis work and contains all our ports. We will post up pictures later this week. __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

12-16-2017, 09:33 PM	#7 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,297 Drives: Tricycle Rep Power: 589151	Looking good! Sent from my SM-G930P using Tapatalk

12-19-2017, 07:19 PM	#9 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 285	__________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

12-19-2017, 07:23 PM	#10 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,449 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Looks nice so far. A lot of us don't do facebook. If you post anything there and not here. We would never know. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

12-19-2017, 09:59 PM	#14 (permalink)
RJ MFG Enthusiast Member Join Date: May 2016 Location: Tampa, FL Posts: 253 Drives: 04 Nissan 350Z CS M6 Rep Power: 285	getting a little ahead of schedule Preview of the rough Fuel Rail Stack: __________________ Contact us: https://www.facebook.com/rjmllc/?fref=nf

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB stillen Supercharger or GTM Supercharger STG 2	ej z34	Wanted	2	11-23-2016 03:57 AM
[FOR SALE] [Feeler] GTM Stage 1.5 Supercharger Kit	AntiVenom	Parts for sale (Private Classifieds)	19	06-01-2016 02:49 PM
Available soon! FEELER	Rayzz	Parts for sale (Private Classifieds)	7	06-23-2015 01:00 PM
[FOR SALE] Feeler	DEpointfive0	Parts for sale (Private Classifieds)	27	01-13-2015 12:18 PM