RJ MFG Supercharger kit Feeler...

RJ MFG

They didn't say anything about an FRP hood... just sayin... paint it factory and no one will know

__________________
Contact us:
https://www.facebook.com/rjmllc/?fref=nf

JJ's370z

Thats what im thinking

-But does reducing the number of laminova cores lower the overall height a bit?

RJ MFG

no it does not. we will supply blanks in the location of missing cores. Saves you money in the event you want to upgrade.

__________________
Contact us:
https://www.facebook.com/rjmllc/?fref=nf

DeliriousClam

Will you take sexual favors in exchange for one of these systems?

__________________
Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet
MECP Advanced: CEA26671
Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

JJ's370z

Ok thanks for that - When will you be announcing the various stages and corresponding power levels?

bullitt5897

I wouldn't expect any stages and pricing for several weeks. RJ MFG is working with laminova directly about the intercooler core. the design there isn't finalized and that will affect some of the other parts. I can say they are looking into mezeire (sp?) 55gpm pump that has a 3000+ hour pump life! That's a huge leap up from the bosch pumps stillen uses. Also after reviewing the cooling capacity I believe they have decided to stay twin pass on the heat exchanger.

The current idea is to run a 4" crank pulley and a blower pulley ranging from 4"-2.5" for stage one. Now the stage 2 guys I think they are bumping the crank pulley up to a 5"-6" crank pulley. So far I believe they are trying to limit the drive ratio to 2.0. At least for those looking to rev to 8.5k-9k. If you stick to lower revs you can get more of a drive ratio (2.4 if your stock rev limit).

It's definitely going to be interesting to see what they come up with. But if I had to guess I would guess that the price per hp will be competitive. The stillen kit is about $19/whp averaging 420whp on 8psi. The GTM/gamma kit is more expensive at $22/whp averaging 410whp on 8psi. This is based on their retail pricing. So if RJ MFG are able to make 450-500whp on 8psi they would be competitive pricing wise with what they have stated thus far.

I am stoked!

__________________
Shop Cars: 2013 318whp Nismo VspecII 370z *SOLD*, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054

JJ's370z

500 wheel @8psi would be mega - Dont think thats out of the question with a 2.9L unit, hopefully torque will also be close to 500ft/lbs.

Stage 2's 600whp @12-13psi anyone?

Senna-F1

I think most are looking for flat or at least linear, increasing, torque. To make 500 hp and 500 hp, you will have peak torque before 5252 rpm with a sharp drop in torque after that. You only need 350 ft/lbs at 7500 rpm to make 500 hp.


Sent from my iPhone using Tapatalk

__________________
618 WHP.452 WTQ.4" Python Intake.15 psi.e50.Topgunz SC.SOHO Tune.S1SE.STG 4 Clutch.Motordyne LTH/Test Pipes/Exhaust.485 Pump.1050x