06-20-2018, 09:39 PM
|
#10 (permalink)
|
|
Base Member
Join Date: Aug 2017
Location: Colorado
Posts: 103
Drives: Infiniti G37s 6MT
Rep Power: 9
|
Quote:
Originally Posted by redondoaveb
Here's how Seb did mine. Pic is drivers side. Passenger side has hose running from pcv to rear of engine compartment and filter installed on end of hose. Couldn't get pic of that.
|
Thanks that’s really helpful I think I get what you’re saying. So look at the pic of my breather filter and you can see that hose just next to it on the upper left with the blue octagon, he deleted that hose and just put a filter there? And my other pic there is a T joint (where that same hose splits off to the blue octagon port), instead of that T joint he just capped that part of the hose with filter also?
Thanks for the help a big reason i wanted to do this was to learn my engine bay, and imma learn today!
__________________
09 G37S RWD 6MT, Topgunz Supercharger, CJM RFS, Walbro 450, 1050x, Nismo 1.5way LSD, Ecutek FF tuned by Seb IG: G3RSTY7 MyG37.com: RickyBobby
|
|
|
Similar Threads
1908Likes
Threaded Mode
