Topgunz - air to air upgrade

Bens98gagt

As you guys may not know i have started on my Air to Air build with Soho motorosports. Pretty much trying to mimic what Evan did with out a built motor. E85 with 928 Super Vortech Upgrade. Will keep everyone posted with the final numbers and how it all went.

https://www.facebook.com/benjamin.bl...05?pnref=story

https://www.facebook.com/photo.php?f...type=3&theater

TopgunZ

What day is the dyno scheduled for?

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Bens98gagt

There are suppose to startc dyno tuning and road testing on the 17th... And I will pick it up on the 25th Black Friday

Senna-F1

What ever happen with this?

Bens98gagt

https://www.instagram.com/p/BcQW-pmH...y=bbrblackwell

Soho is doing a whole video and write up on it sorry I haven’t really figured out how to post pictures here. But just like Evan I did over 700hp to the wheels and it’s a beast.

redondoaveb

Wow, great numbers! You smashed SOHO's projected numbers. What pulleys did you end up using and what was your psi?

Senna-F1

Give us all the info on your build. SOHO is where I'll be with mine once the new SC kit comes out and I get it self installed.

Bens98gagt

Will do... Soho is as intrested as everyone is too as well. They are all in on this build.

redondoaveb

What pulleys are you going to run?

Bens98gagt

I have the 9lb stillen pulley and the 2.8 supercharger pulley with a bunch of bigger idler pulleys and Tbats system to avoid any slippage. With the 928 Super Vortech upgrade I plan to spin it much faster so I’m hoping for some really good flow. I will create a diagram of my pulley system after testing to show my final configuration. But we have allot of pulleys to test with and I will report back the best combination and configuration for this setup. I really hope to make about 17psi but i dont know it will be that high since my engine flows real nicely with a lower ported intake manifold and full Motordyne LongTube headers and cat back exhaust. I have no cats on my exhaust system. It will come down to the whole argument of flow vs PSI so all I can do at this point is test and hope for the best.

redondoaveb

I'm really curious to see what you get with the different combination of pulleys. Isn't Evan around 700hp? I've got the 9 lb and the 2.87, I'm hoping to get to mid 500's without using them. I've got the Si sc, a2a, tbatt kit and e85 (flex fuel).

Bens98gagt

Soho is thinking i will be in the 600 range but we will wait and see. I’m doing all the right things with the fuel upgrades and big injectors. I’m actaully going to run 1350CCs.... I know its a little overkill but just investing for the future.