10-16-2016, 10:07 PM
|
#10 (permalink)
|
|
Enthusiast Member
Join Date: Oct 2014
Location: OKC, OK
Posts: 316
Drives: 2010 370Z 7AT S/C
Rep Power: 17
|
Quote:
Originally Posted by Z&I
Went to the track last night and pulled off multiple 11.6 @124 runs. Need to work on my 60' big time as it was 1.9 all night. Would either bog or spin. Not bad for first time in a year. With that mph I should be low 11's easy.
Custom AtA Stillen SC|9 lb pulley|2.95" SC Pulley|E85|CJM S1-S|ID1000cc|Aeromotive 340lph|Zeitronix Flex fuel|Berk Test Pipes|Stillen CBE|Stillen Oil/Trans Cooler|AP Racing|Level 10 trans|F.I. Flex plate|Nismo-S tune suspension|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura IG: evanosteenz34
_________________________________
Great runs ! Nice and consistent !
What tires and wheels are you running ?
(1.9's aren't too shabby for our cars on stockish wheels/tires)
Are you using and how do you have the EcuTek Launch and Slip set ?
|
I'm on 19x11 forgestars with Mickey Thompson ET Street tires. My TC is on 0 and I'm trying to figure out how to use Sebz "launch hack" If I don't stall it up to a certain throttle position it bogs down when you press the brake and gas at the same time. I need to get it figured out.
__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34
|
|
|
Similar Threads
1908Likes
Threaded Mode
