Topgunz - air to air upgrade

Z&I

Went to the track last night and pulled off multiple 11.6 @124 runs. Need to work on my 60' big time as it was 1.9 all night. Would either bog or spin. Not bad for first time in a year. With that mph I should be low 11's easy.

Custom AtA Stillen SC|9 lb pulley|2.95" SC Pulley|E85|CJM S1-S|ID1000cc|Aeromotive 340lph|Zeitronix Flex fuel|Berk Test Pipes|Stillen CBE|Stillen Oil/Trans Cooler|AP Racing|Level 10 trans|F.I. Flex plate|Nismo-S tune suspension|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura IG: evanosteenz34

_________________________________

Great runs ! Nice and consistent !

What tires and wheels are you running ?
(1.9's aren't too shabby for our cars on stockish wheels/tires)

Are you using and how do you have the EcuTek Launch and Slip set ?

__________________
.
BB

StillenZ84

I'm on 19x11 forgestars with Mickey Thompson ET Street tires. My TC is on 0 and I'm trying to figure out how to use Sebz "launch hack" If I don't stall it up to a certain throttle position it bogs down when you press the brake and gas at the same time. I need to get it figured out.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34