BP turbo build/advice

hc_416 · 03-26-2016, 10:18 AM

Update! I am starting my build next week. First thing I am doing is getting the new clutch put in by a friend. The week after the kit will be installed, but I still need to find a tuner. I do have a question, what oil do you guys recommend, and if I get the base tune can I drive it to my tuner with out going into boost?

EliteXpress · 03-26-2016, 12:13 PM

I run Rotella T6 !

jwick · 03-28-2016, 08:29 AM

Quote:

Originally Posted by elitexpress

i run rotella t6 !

^^^this^^^

jwick · 03-28-2016, 08:30 AM

Quote:

Originally Posted by hc_416

Update! I am starting my build next week. First thing I am doing is getting the new clutch put in by a friend. The week after the kit will be installed, but I still need to find a tuner. I do have a question, what oil do you guys recommend, and if I get the base tune can I drive it to my tuner with out going into boost?

Yes. The base tune will allow you to drive it to your tuner. Just don't beat on it.

This is only after you have done all your checks. Make sure your AFRs are good.

TcRocket · 03-28-2016, 01:59 PM

Thanks jwick for the suggestions and safety wire idea. Almost five hours worth the work here lol. My safety wire might be a little overkill but I didn't want things moving

EliteXpress · 03-28-2016, 02:37 PM

Looking good, how many feet did it take to complete the wrap?

TcRocket · 03-28-2016, 07:24 PM

Quote:

Originally Posted by EliteXpress

Looking good, how many feet did it take to complete the wrap?

I used every bit of my 100' roll. I needed about one more foot to finish the last piece that ties into exhaust. But that didn't really need it anyway. So don't waste any lol. Thanks guys was a tedious job but worth it....

jwick · 03-28-2016, 09:10 PM

Quote:

Originally Posted by TcRocket

I used every bit of my 100' roll. I needed about one more foot to finish the last piece that ties into exhaust. But that didn't really need it anyway. So don't waste any lol. Thanks guys was a tedious job but worth it....

Isn't a fun process but it's worth it.

Nice job!

jwick · 03-29-2016, 08:52 AM

Quote:

Originally Posted by jwick

Isn't a fun process but it's worth it.

Nice job!

Took me a couple/3 hrs with a second pair of hands as a helper.

YzGyz · 03-28-2016, 02:47 PM

Quote:

Originally Posted by TcRocket

Thanks jwick for the suggestions and safety wire idea. Almost five hours worth the work here lol. My safety wire might be a little overkill but I didn't want things moving

Mine looked like that too! I bought 100' and used all of it!!

YzGyz

03-26-2016, 12:13 PM	#2 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 12	I run Rotella T6 ! jwick likes this.

03-28-2016, 01:59 PM	#5 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 11	Thanks jwick for the suggestions and safety wire idea. Almost five hours worth the work here lol. My safety wire might be a little overkill but I didn't want things moving 1cleanZ, zguynate, hc_416 and 2 others like this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Turbo Build	davidson_z34	Forced Induction	33	11-12-2015 07:45 PM
Need Advice on Bottom End Build	604GZ	Engine & Drivetrain	5	04-07-2015 09:09 AM
Single turbo build	jlask370	Forced Induction	13	10-07-2013 12:41 PM
Need advice on stereo build....	mengel	Audio & Video	7	02-08-2011 08:24 AM

03-26-2016, 10:18 AM	#1 (permalink)
hc_416 Enthusiast Member Join Date: Aug 2013 Location: CT Posts: 254 Drives: g37 Rep Power: 13	Update! I am starting my build next week. First thing I am doing is getting the new clutch put in by a friend. The week after the kit will be installed, but I still need to find a tuner. I do have a question, what oil do you guys recommend, and if I get the base tune can I drive it to my tuner with out going into boost?

03-28-2016, 02:37 PM	#6 (permalink)
EliteXpress Base Member Join Date: Sep 2014 Location: Katy Posts: 238 Drives: '16 370z 6MT Rep Power: 12	Looking good, how many feet did it take to complete the wrap?