BP V 2.0 turbo kits...ROUND 3 place your order now

jwick · 04-19-2016, 05:17 PM

Did you tighten the AN fittings properly?

TheWeez · 04-19-2016, 05:18 PM

Yea I can't muscle them around anymore

Sent from my iPhone using Tapatalk

Jayhovah · 04-19-2016, 05:25 PM

Quote:

Originally Posted by TheWeez

Yea I can't muscle them around anymore

Sent from my iPhone using Tapatalk

Hit the gym? =)

jwick · 04-19-2016, 06:12 PM

Quote:

Originally Posted by TheWeez

Yea I can't muscle them around anymore

Sent from my iPhone using Tapatalk

That might be your problem. You don't want much torque on them. Like a qrt to half turn after snug. The first time I use one I clamp it down and then unscrew it completely and set it again. Sometime you have to knock that anodized coating off it so it'll seal good.

TheWeez · 04-19-2016, 05:28 PM

Haha I might need to. I'm sure I can fix it. Loving the kit no matter what blips I hit.

Sent from my iPhone using Tapatalk

Jayhovah · 04-19-2016, 05:34 PM

Quote:

Originally Posted by TheWeez

Haha I might need to. I'm sure I can fix it. Loving the kit no matter what blips I hit.

Sent from my iPhone using Tapatalk

Hit me up when you get it all done! I am in St Pete and I'd love to check it out! I would have gone BP myself had I not been part of the GTM group buy debacle.

jax4557 · 04-20-2016, 09:33 PM

Quote:

Originally Posted by Jayhovah

Hit me up when you get it all done! I am in St Pete and I'd love to check it out! I would have gone BP myself had I not been part of the GTM group buy debacle.

What tuner did you use? Im in Jacksonville and just got my turbo from Sasha today

Jayhovah · 04-20-2016, 09:40 PM

Quote:

Originally Posted by jax4557

What tuner did you use? Im in Jacksonville and just got my turbo from Sasha today

I did my install in Texas (my brother in law has a lift and we did the install together). Took it to JTRAN in Houston and couldn't be happier. Johnny really knows what he's doing.

Sent from my Nexus 6 using Tapatalk

solidus · 04-21-2016, 06:05 AM

Quote:

Originally Posted by jax4557

What tuner did you use? Im in Jacksonville and just got my turbo from Sasha today

You're in J-ville , you pretty much have a choice. Either Z1-Motorsports in Carrollton GA or Tampa.

jwick · 04-21-2016, 08:23 AM

Quote:

Originally Posted by solidus

You're in J-ville , you pretty much have a choice. Either Z1-Motorsports in Carrollton GA or Tampa.

Take it to Z1

TheWeez · 04-19-2016, 05:35 PM

It's all done and tuned. Just leaking a bit. If you have access to a lift I'll come over this weekend

Sent from my iPhone using Tapatalk

Jayhovah · 04-19-2016, 05:41 PM

Quote:

Originally Posted by TheWeez

It's all done and tuned. Just leaking a bit. If you have access to a lift I'll come over this weekend

Sent from my iPhone using Tapatalk

hah! I wish! If it makes you feel any better, I changed my oil this weekend and while doing a general inspection I noticed a small oil leak as well... It's eating me up inside as I did not have time to fix it.. so it will remain until next oil change. At least it is in an accessible place!

TheWeez · 04-19-2016, 06:16 PM

Thanks! I'll try that. Will oil pour out if i take them off?

Sent from my iPhone using Tapatalk

jwick · 04-19-2016, 08:37 PM

Quote:

Originally Posted by TheWeez

Thanks! I'll try that. Will oil pour out if i take them off?

Sent from my iPhone using Tapatalk

You might get some residual come out the line but keep them vertical and it'll me minimum.

PongSanity · 04-19-2016, 07:39 PM

Ever tried to put a lil Teflon tape around the fittings?'

Sent from my iPhone using Tapatalk

04-19-2016, 05:17 PM	#1 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465058	Did you tighten the AN fittings properly? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-19-2016, 05:18 PM	#2 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 25	Yea I can't muscle them around anymore Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-19-2016, 05:28 PM	#5 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 25	Haha I might need to. I'm sure I can fix it. Loving the kit no matter what blips I hit. Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-19-2016, 05:35 PM	#11 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 25	It's all done and tuned. Just leaking a bit. If you have access to a lift I'll come over this weekend Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-19-2016, 06:16 PM	#13 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 25	Thanks! I'll try that. Will oil pour out if i take them off? Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-19-2016, 07:39 PM	#15 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 13	Ever tried to put a lil Teflon tape around the fittings?' Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM