BP V 2.0 turbo kits...ROUND 3 place your order now

jwick · 04-06-2016, 01:47 PM

Quote:

Originally Posted by TheWeez

It's a thin walled 14mm that is rare. Turbo mounted this morning

Going to have to wait until Sunday to finish because of work.

Sent from my iPhone using Tapatalk

Yes. ^^This^^

It's pretty hard to find a thin wall, deep socket, 14mm spark plug socket.

TcRocket · 04-06-2016, 02:41 PM

OK thanks got one ordered. My FI exhaust will be here tomorrow

jwick · 04-06-2016, 03:46 PM

Took the car out this morning to run errands. It was beastly today. It was high 70's/low 80's so must have been some weird combination of dense air and low humidity. She was so responsive I raped aped her for a few good pulls on the freeway.

TheWeez · 04-06-2016, 03:58 PM

If anyone with that spark plug socket can overnight it to me and I'll ship it back that would be amazing.

Sent from my iPhone using Tapatalk

TcRocket · 04-06-2016, 05:08 PM

Quote:

Originally Posted by TheWeez

If anyone with that spark plug socket can overnight it to me and I'll ship it back that would be amazing.

Sent from my iPhone using Tapatalk

It's seven bucks on Amazon

TheWeez · 04-06-2016, 05:48 PM

Oh I only saw the one that will ship out the 13th. Thanks

Extended the bracket hole one full hole to the right and she fits now

ARrado15 · 04-07-2016, 05:23 AM

I see it was asked earlier in this thread but not really a clear answer so would this kit fit the Stillen CBE? I'm new to forced induction and am contemplating this kit or the Stillen SC

jwick · 04-07-2016, 08:59 AM

Quote:

Originally Posted by ARrado15

I see it was asked earlier in this thread but not really a clear answer so would this kit fit the Stillen CBE? I'm new to forced induction and am contemplating this kit or the Stillen SC

It fit just fine with my Stillen CBE on my G.

If you can swap the factory wye pipe back in for the Stillen and leave the Stillen mid-pipe and muffler on, then it'll work.

This kit will bolt up to any exhaust that keeps the factory wye/mid-pipe flange location.

1cleanZ · 04-07-2016, 09:00 AM

Quote:

Originally Posted by ARrado15

I see it was asked earlier in this thread but not really a clear answer so would this kit fit the Stillen CBE? I'm new to forced induction and am contemplating this kit or the Stillen SC

No matter what you do, I would avoid running any forced induction application with the Stillen Catback as its extremely restrictive***

jwick · 04-07-2016, 11:05 AM

Quote:

Originally Posted by 1cleanZ

No matter what you do, I would avoid running any forced induction application with the Stillen Catback as its extremely restrictive***

I agree. That's why I switched to FI.

The Stillen exhaust is great NA but it's definitely a bottleneck for a turbo application.

stefonelee · 04-07-2016, 11:53 AM

What oil you guys running with your turbo set up?

1cleanZ · 04-07-2016, 12:51 PM

Quote:

Originally Posted by stefonelee

What oil you guys running with your turbo set up?

Take a few minutes to search. This topic has been covered numerous of times

Boosted Performance · 04-07-2016, 01:27 PM

Quote:

Originally Posted by TheWeez

Oh I only saw the one that will ship out the 13th. Thanks

Extended the bracket hole one full hole to the right and she fits now

Driver or passenger side bracket?

TheWeez · 04-07-2016, 01:28 PM

Passenger

Sent from my iPhone using Tapatalk

jax4557 · 04-07-2016, 03:37 PM

I joined the family today! I cant wait for this.

I think I am going to go with the SCG-1 to control boost and also for the built in AFR fail safe. What other gauges do you guys recommend and models? I need (want) ethanol content, fuel pressure, oil pressure/temp.

Is there any way to have a gauge confirm scavenge pump operation/failure? It does not carry pressure on either side?

04-06-2016, 02:41 PM	#242 (permalink)
TcRocket Base Member Join Date: Sep 2015 Location: Coldwater MI Posts: 165 Drives: 2010 370z Nismo Rep Power: 9	OK thanks got one ordered. My FI exhaust will be here tomorrow jwick likes this.

04-06-2016, 03:46 PM	#243 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Took the car out this morning to run errands. It was beastly today. It was high 70's/low 80's so must have been some weird combination of dense air and low humidity. She was so responsive I raped aped her for a few good pulls on the freeway. EliteXpress and TheWeez like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-06-2016, 03:58 PM	#244 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	If anyone with that spark plug socket can overnight it to me and I'll ship it back that would be amazing. Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-06-2016, 05:48 PM	#246 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	BP V 2.0 turbo kits...ROUND 3 place your order now Oh I only saw the one that will ship out the 13th. Thanks Extended the bracket hole one full hole to the right and she fits now __________________ "It's not fast enough" - Edgar J. Hoover Last edited by TheWeez; 04-06-2016 at 09:09 PM.

04-07-2016, 01:28 PM	#254 (permalink)
TheWeez Base Member Join Date: Oct 2015 Location: Tampa Posts: 246 Drives: 370Z PG 6M ST Rep Power: 23	Passenger Sent from my iPhone using Tapatalk __________________ "It's not fast enough" - Edgar J. Hoover

04-07-2016, 05:23 AM	#247 (permalink)
ARrado15 Base Member Join Date: Nov 2015 Location: Las Vegas Posts: 96 Drives: 370z M6 Rep Power: 16	I see it was asked earlier in this thread but not really a clear answer so would this kit fit the Stillen CBE? I'm new to forced induction and am contemplating this kit or the Stillen SC

04-07-2016, 11:53 AM	#251 (permalink)
stefonelee Base Member Join Date: Jun 2015 Location: Columbus GA Posts: 60 Drives: 11 370z M6 Rep Power: 9	What oil you guys running with your turbo set up?

04-07-2016, 03:37 PM	#255 (permalink)
jax4557 Base Member Join Date: Nov 2014 Location: Jacksonville Posts: 102 Drives: 2014 370z Sport M6 Rep Power: 10	I joined the family today! I cant wait for this. I think I am going to go with the SCG-1 to control boost and also for the built in AFR fail safe. What other gauges do you guys recommend and models? I need (want) ethanol content, fuel pressure, oil pressure/temp. Is there any way to have a gauge confirm scavenge pump operation/failure? It does not carry pressure on either side? GaleForce likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM