http://www.the370z.com/forced-induction/106550-blew-up.html

Those torque numbers on stock internals. Guessing your next post will look something like this...........:/

Sent from my Nexus 6P using Tapatalk

Wow your response was very inappropriate but understandable! :stirthepot:

One would think you would start off by saying congratulations!:tiphat:

But instead come with this inappropriate tag of a previous forum members experience not knowing all of the ingredients involved with this build.:eek:

Final numbers below.

7psi 9psi 12psi

Not in appropriate not knocking him those are some badass numbers. Dynosty tuned my boosted performance Z. I had them stop at 417 wtq due to fear of breaking rods with stock internals. So we'll see how long she lasts. I hope it does. If so I'll turn mine up some more.

Sent from my Nexus 6P using Tapatalk

He's on ethanol brotha ^

BP V 2.0 turbo kits...ROUND 3 place your order now
 

There's several people running more than 500wtq on E85. This block is pretty stout. I ran 475wtq for the first year I was boosted and now I'm running 440wtq. All that on pump gas. No issues at all.

Anything can happen but it should hold together based on what some of the FI guys are running. **** djtodd tracks his at 660whp.

And that somehow makes 686whp less impressive? Any one that knows anything about this platform knows you're running E85 if you crack 600whp on stock internals.

I think he was just clarifying it was E100 and not E85?

Sent from my Nexus 6 using Tapatalk

The Z was Dyno Tuned utilizing pump gas and E70.

Really wish I had e85 readily available around here ... What a/r ratio 6266 are you running ? the 1.15 ?

BB 6266 T4 1.15 Turbo

The numbers you guys with full V2.0 and Ecutek are getting is insane. I'd really like to know how much is the new compressor cover and how much is Ecutek. Either way y'all are making similar power at 2-3 pounds less than us running V1.0 and UpRev.

I think he was speaking on something he didn't have all the facts on.

Seems that way!

Sent from my Nexus 6 using Tapatalk

BP v2 journal bearing here. Dyno 505/435 on 93. I slapped the kit on at 39,xxx and now have 52,xxx. He is my DD and yes I do race her lots. Elite has serious HP/tq there but this is not his first boosted ride. Wish I was faster but don't want to spend more on my ride. Ecutec seems to really get every bit of power out of the block and then the traction control really help lays it down.

Happy boosting
YzGyz