My kit has arrived! WOOOOOP!

Hotrodz · 01-08-2016, 12:56 PM

Quote:

Originally Posted by jwick

Think I'm going Clutchmasters if I ever have to upgrade. Which I guess will be soon after E85 upgrade.

That was exactly why I had to upgrade. Although the clutch never failed, but on 100 octane and 552tq it would start to stink if I made more than a couple of hard runs. I could only do two runs in a row at the airport the day before ZDayZ last year.

Sent from my SM-N910P using Tapatalk

Jayhovah · 01-08-2016, 12:59 PM

Quote:

Originally Posted by Hotrodz

Don't mean to be a smart a$$ but why did you go FI then?

Sent from my SM-N910P using Tapatalk

No offense taken! =)
I've always wanted to do a build like this. It's been a dream since I was a teenager and swapped the motor on my '87 RX-7 Turbo. That car never really ran properly and I had to sell it to get something reliable in college... I am older and smarter now (with slightly deeper pockets), and I just wanted to build a nice, powerful, street car that I could really enjoy. That is why I am generally averse to things like lightened flywheels and 6-puck clutches - I am after a fast, factory feeling street car and anything that harms driveability has to be well thought out in my eyes... Since the full face clutch holds the power and will be the easiest to drive, I don't mind giving up flat-foot shifting and burnouts since those are not things I was ever really in to anyway. Make sense?

Hotrodz · 01-08-2016, 01:07 PM

Right on, there are plenty of folks that just want feel the power and play a little when they want too. And I totally get building your own vs just buying it. According to my wife im in total retard mode when it comes to the Z....she is pretty much right. Anyway, I'm glad you have posted up on the forum. Your journey will help others out as well.

Sent from my SM-N910P using Tapatalk

Jayhovah · 01-08-2016, 01:14 PM

Quote:

Originally Posted by Hotrodz

Right on, there are plenty of folks that just want feel the power and play a little when they want too. And I totally get building your own vs just buying it. According to my wife im in total retard mode when it comes to the Z....she is pretty much right. Anyway, I'm glad you have posted up on the forum. Your journey will help others out as well.

Sent from my SM-N910P using Tapatalk

Pretty much nailed it on the head right there. I really do hope I am able to contribute to the community with my experience! I do text a little with Groove about little hiccups with this kit, but he is working through it so fast it's making me look bad. Where the F is your build thread, Groove!? =)

Edit: Found his build thread =)
GrooveStyle's Build

jwick · 01-08-2016, 02:23 PM

I don't do burnouts or flat foot shift either and the full face disk has done everything I've asked if it.

Jayhovah · 01-08-2016, 10:11 PM

Quote:

Originally Posted by jwick

I don't do burnouts or flat foot shift either and the full face disk has done everything I've asked if it.

Your experience helped me decide! I just sent payment to Z1..
The price of their clutch/flywheel setup is pretty appealing.

I got:
Z1 Full Face clutch and flywheel combo
Redline MT-85
Motul DOT4
GTR Spark Plugs
Z1 Hoodie

Looking forward to feeling my tires slip instead of the clutch!

jwick · 01-08-2016, 10:20 PM

What spark plugs were you running if you just bought the GTR plugs?

jwick · 01-08-2016, 10:22 PM

You'll be happy with the Z1 clutch.

I didn't see it in your list but you need either the ZSpeed HD CSC or the Z1 elimination kit. Don't waste the labor money by not ditching the OEM CSC cuz it WILL fail on you.

Jayhovah · 01-08-2016, 10:26 PM

Quote:

Originally Posted by jwick

What spark plugs were you running if you just bought the GTR plugs?

Stock. The code I threw on may way home from Texas was a misfire.. Johnny recommended I change to GTR plugs. Code hasn't resurfaced and I'll have them swapped in soon.

Quote:

Originally Posted by jwick

You'll be happy with the Z1 clutch.

I didn't see t in your list but you need either the ZSpeed HD CSC or the Z1 elimination kit. Don't waste the labor money by no ditching the OEM CSC cuz it WILL fail on you.

Yep.. I scored a brand new HD CSC off the classifieds here a while back.

Jayhovah · 01-08-2016, 10:46 PM

One more thing! Jason from Gamma sent me a little package with all the parts that were missing from the kit. I got the abrasion resistant power steering lines, and spacers/hardware for mounting the crash bar properly. Appreciate that! I have to give a shout out to Gamma for setting up such excellent tech support with Jason. Could not have finished the install without him.

GrooveStyle · 01-08-2016, 10:50 PM

Hah! I'm just sneaky.....

and for the record, I've done rear diff bushings on my Z and a buddy's HR 350z. Not bad if you have the right process... it involves a sawzall, a drill, some rented hand tools from your friendly neighborhood auto parts store, and some hardware... Followed the DIY on here and it worked out ok. If you're gonna farm out the clutch install, might as well pay for the diff too tho I guess. In my opinion, after you've installed this kit, everything else is pretty simple...

yeah, and +1 for Jason at Gamma. Jayhovah told me about him and since we've been in contact, Jason's been really helpful...

jwick · 01-08-2016, 10:57 PM

Quote:

Originally Posted by Jayhovah

Stock. The code I threw on may way home from Texas was a misfire.. Johnny recommended I change to GTR plugs. Code hasn't resurfaced and I'll have them swapped in soon.

Yep.. I scored a brand new HD CSC off the classifieds here a while back.

I seriously question Gamma's decision sending any turnkey kit out without including a cooler plug.

Nice score on the CSC!

RumbleFish · 01-11-2016, 10:50 PM

Great thread. I'm so jealous of you guys that can do these kinds of builds.

Congrats on your build

Jayhovah · 01-19-2016, 03:49 PM

Quote:

Originally Posted by RumbleFish

Great thread. I'm so jealous of you guys that can do these kinds of builds.

Congrats on your build

I used to feel the same way... Just go for it. =)

Got my clutch and flywheel installed! Feel great! I need to adjust the pedal a little bit as the engagement feels a bit low to me, but all in all everything seems good. I paid the mechanic and extra hour to check over the installation and he also said we did a great job so I was happy with that. The only thing he didn't like is a hose that Gamma cut a little too long so it's kind of pushed up against the chassis. We felt the same way, but after we got it on we couldn't get it back off (the mechanic likened it to a chinese finger trap) and it wasn't bad enough that we felt the need to cut it off. It has a heat wrapping around it, so if rubbing becomes and issue I should notice during maintenance.

Hotrodz · 01-19-2016, 04:36 PM

Nice, get that rear differential bushing replaced and then you are good to go beat up on those guys that think they are fast....they are but you be really fast! lol

Sent from my SM-N910P using Tapatalk

01-08-2016, 01:07 PM	#198 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Right on, there are plenty of folks that just want feel the power and play a little when they want too. And I totally get building your own vs just buying it. According to my wife im in total retard mode when it comes to the Z....she is pretty much right. Anyway, I'm glad you have posted up on the forum. Your journey will help others out as well. Sent from my SM-N910P using Tapatalk hjo1078, Rusty and TBatt like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-08-2016, 02:23 PM	#200 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	My kit has arrived! WOOOOOP! I don't do burnouts or flat foot shift either and the full face disk has done everything I've asked if it. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build Last edited by jwick; 01-08-2016 at 02:36 PM.

01-08-2016, 10:20 PM	#202 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	What spark plugs were you running if you just bought the GTR plugs? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

01-08-2016, 10:22 PM	#203 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	My kit has arrived! WOOOOOP! You'll be happy with the Z1 clutch. I didn't see it in your list but you need either the ZSpeed HD CSC or the Z1 elimination kit. Don't waste the labor money by not ditching the OEM CSC cuz it WILL fail on you. hooey_b likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build Last edited by jwick; 01-08-2016 at 10:25 PM.

01-11-2016, 10:50 PM	#208 (permalink)
RumbleFish Premium Member Join Date: Oct 2013 Location: Los Feliz, Ca. Posts: 1,212 Drives: '10-Sport-M6 Rep Power: 8239	Great thread. I'm so jealous of you guys that can do these kinds of builds. Congrats on your build wideglideleon likes this. __________________ How far, this...Utopia? F.I. CBE V2/Stillen G3 CAI/GTM 25R OC/EcuTek tune (Specialty Z)/ KW V3's/Stillen Sway bars/SPC rear camber kit/Z1 FUCA/Mich. PSS4S 255/35-295/30

01-08-2016, 10:50 PM	#206 (permalink)
GrooveStyle Base Member Join Date: Sep 2011 Location: Waterloo, Iowa Posts: 230 Drives: '12 370z GM 6MT Rep Power: 13	Hah! I'm just sneaky..... and for the record, I've done rear diff bushings on my Z and a buddy's HR 350z. Not bad if you have the right process... it involves a sawzall, a drill, some rented hand tools from your friendly neighborhood auto parts store, and some hardware... Followed the DIY on here and it worked out ok. If you're gonna farm out the clutch install, might as well pay for the diff too tho I guess. In my opinion, after you've installed this kit, everything else is pretty simple... yeah, and +1 for Jason at Gamma. Jayhovah told me about him and since we've been in contact, Jason's been really helpful...

01-19-2016, 04:36 PM	#210 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	Nice, get that rear differential bushing replaced and then you are good to go beat up on those guys that think they are fast....they are but you be really fast! lol Sent from my SM-N910P using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new Z arrived.	NS370Z	New 370Z Owner	13	06-23-2012 05:54 PM
It Has Arrived...	Alstann	New 370Z Owner	6	01-14-2012 08:46 PM
My Z has arrived!	Z_ealot	New 370Z Owner	26	08-17-2011 07:43 PM
She arrived!	Gixxer2k4	Introduction	13	12-23-2010 12:51 AM
My Z Has Arrived!	370er	Australia/New Zealand	14	10-01-2009 09:33 PM