Seibon carbon fiber hood questions

BlackZeda · 06-20-2015, 09:43 AM

It looks like the left was adjusted (bent) but the right doesn't look like it needed it. Also, the left pin doesn't usually cleanly clear the latch rod. I have to slightly push down once or twice for it to disengage, so it looks like the installer had to get jiggy with it a bit.

These aren't the best since it is really bright out:

sandersd · 06-20-2015, 09:57 AM

Many thanks! Did you notice if they modified the underside of the latch to give more clearance for the pin to enter?

BlackZeda · 06-20-2015, 10:02 AM

I will take a look at it...the shop will open in an hour, so I will call them when I have a chance to see how much effort they needed and if they have any tips.

BlackZeda · 06-20-2015, 12:03 PM

It looks like the mechanic did have to make some adjustments, but since I never had seen them when they were new I am not sure how much was done:

sandersd · 06-20-2015, 12:15 PM

Thanks again. I started my own install thread to document this for future reference.

LadyZny · 07-21-2016, 07:44 PM

Did any of you with the CF hoods have any luck with making the washer nozzles work? I saw the one thread where the guy made a plate and riveted it on, but was looking to see if there are any other successful ways of getting them to work.

Sent from my iPhone using Tapatalk

BlackZeda · 07-21-2016, 09:05 PM

Quote:

Originally Posted by LadyZny

Did any of you with the CF hoods have any luck with making the washer nozzles work? I saw the one thread where the guy made a plate and riveted it on, but was looking to see if there are any other successful ways of getting them to work.

Sent from my iPhone using Tapatalk

Seibon makes 100% functional hoods. My washers work just like the OEM hood.

LadyZny · 07-21-2016, 09:07 PM

How did you get the clips to stay in? Mine don't want to latch on the underside.

Sent from my iPhone using Tapatalk

shirokenkami · 12-06-2016, 12:19 PM

Quote:

Originally Posted by BlackZeda

Seibon makes 100% functional hoods. My washers work just like the OEM hood.

Yeah, Seibon is probably the best on the market for a mass production carbon fiber system that is affordable to the masses.

FireDan50 · 06-25-2019, 08:23 PM

Kinda reviving this from the dead...for those who had a shop do this, about how much did you end up paying?

BettyZ · 06-26-2019, 10:21 AM

Quote:

Originally Posted by FireDan50

Kinda reviving this from the dead...for those who had a shop do this, about how much did you end up paying?

Good question. I'm about to order one myself, and was going to use a shop.. but I'm starting to think that no one will do this with more attention to detail than I will..

06-20-2015, 09:43 AM	#46 (permalink)
BlackZeda A True Z Fanatic Join Date: May 2011 Location: Englewood, CO Posts: 1,109 Drives: 19 Audi TT RS Rep Power: 21	It looks like the left was adjusted (bent) but the right doesn't look like it needed it. Also, the left pin doesn't usually cleanly clear the latch rod. I have to slightly push down once or twice for it to disengage, so it looks like the installer had to get jiggy with it a bit. These aren't the best since it is really bright out: sandersd likes this.

06-20-2015, 09:57 AM	#47 (permalink)
sandersd Enthusiast Member Join Date: May 2014 Location: Houston, TX, USA Posts: 280 Drives: 2014 370z Nismo Rep Power: 10	Many thanks! Did you notice if they modified the underside of the latch to give more clearance for the pin to enter? __________________ 2014 370Z NISMO -- HKS Hi-Power Exhaust -- Swift Springs -- BC ER Coilovers -- SPL Suspension Components -- Nismo R-Tune Intake -- Seibon BD CF Hood

06-20-2015, 10:02 AM	#48 (permalink)
BlackZeda A True Z Fanatic Join Date: May 2011 Location: Englewood, CO Posts: 1,109 Drives: 19 Audi TT RS Rep Power: 21	I will take a look at it...the shop will open in an hour, so I will call them when I have a chance to see how much effort they needed and if they have any tips. sandersd likes this.

06-20-2015, 12:15 PM	#50 (permalink)
sandersd Enthusiast Member Join Date: May 2014 Location: Houston, TX, USA Posts: 280 Drives: 2014 370z Nismo Rep Power: 10	Thanks again. I started my own install thread to document this for future reference. __________________ 2014 370Z NISMO -- HKS Hi-Power Exhaust -- Swift Springs -- BC ER Coilovers -- SPL Suspension Components -- Nismo R-Tune Intake -- Seibon BD CF Hood

06-25-2019, 08:23 PM	#55 (permalink)
FireDan50 Track Member Join Date: Mar 2012 Location: San Antonio Posts: 714 Drives: '09 370Z PW M6 Rep Power: 19	Kinda reviving this from the dead...for those who had a shop do this, about how much did you end up paying? __________________ VSR Single-turbo kit: 611hp/517tq @ 10psi (Q16 race gas) Dan's VSR top-mount turbo 370z

06-20-2015, 12:03 PM	#49 (permalink)
BlackZeda A True Z Fanatic Join Date: May 2011 Location: Englewood, CO Posts: 1,109 Drives: 19 Audi TT RS Rep Power: 21	It looks like the mechanic did have to make some adjustments, but since I never had seen them when they were new I am not sure how much was done:

07-21-2016, 07:44 PM	#51 (permalink)
LadyZny Base Member Join Date: Jul 2015 Location: Buffalo, NY Posts: 7 Drives: 12 Nissan 370Z BC A7 Rep Power: 9	Did any of you with the CF hoods have any luck with making the washer nozzles work? I saw the one thread where the guy made a plate and riveted it on, but was looking to see if there are any other successful ways of getting them to work. Sent from my iPhone using Tapatalk

07-21-2016, 09:07 PM	#53 (permalink)
LadyZny Base Member Join Date: Jul 2015 Location: Buffalo, NY Posts: 7 Drives: 12 Nissan 370Z BC A7 Rep Power: 9	How did you get the clips to stay in? Mine don't want to latch on the underside. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTTrade: Seibon Carbon Fiber Hood for PW OEM Hood	AlvinNguyen	Parts for sale (Private Classifieds)	9	11-10-2014 10:06 PM
VIS or Seibon carbon fiber hood	vo370z	Exterior & Interior	1	05-14-2013 07:49 AM
[FOR SALE] NEW Seibon Carbon Fiber Hood!	Nismozs	Parts for sale (Private Classifieds)	39	07-10-2012 09:34 AM
[FOR SALE] Seibon Carbon Fiber hood	Xsad	Parts for sale (Private Classifieds)	10	10-06-2011 02:28 PM
seibon carbon fiber hood questions?	zuperman 370	Exterior & Interior	3	10-11-2010 01:50 PM