Issues with DRL's and painted headlights

VDC_OFF · 04-01-2014, 05:28 PM

what I do is after I drill the hole in the shroud and feed the wire through. I then fille the shroud with silicone sealant. Then I push the halo in place and lightly clean the edges. Dont push the halo all the way to the bottom, you want a slight gap so the glue is still exposed. Then you snap the shaved diffuser over the halo until it touches the glue and the inside of the shroud. The glue under the halo will keep the diffuser from falling off. Clean up and continue your wiring. If you really want to be sure its glued put a small dab on your finger and run it along the inside edges of the diffuser. Its clear so you cant see it.

vrfreak · 04-01-2014, 05:40 PM

mhm ok I see what ur saying well I'm gonna b In trouble there I guess cuz I did my lights in like steps kind off and I have my halo already mounted in the big shroud a long time ago so that goop in there is hard! probably have to figure out another way then if I only had my shipment then it would b easier to picture everything!
guess I should have waited for everything to arrive first

JMac88 · 04-01-2014, 06:53 PM

Someone suggested a uv clear tint. Might try it out this summer.

Ed, if you find a dealer let me know. I still want my drl's off so my Halos actually have a purpose

edconline · 04-01-2014, 07:09 PM

Agreed James. And I have someone here in Edmonton that will do it he has said we will try mine soon as it's on the road and I'm sure he would do more.

I plan to use the acrylic covers (blacked out) at shows from now on, it'll match the rest of the car anyways lol

edconline · 04-06-2014, 03:28 AM

Updates:

More to follow...

edconline · 04-06-2014, 04:10 PM

As promised:

I think everyone gets the idea of what is involved here, the metal plate will protect the plastic housing from being melted by the reflected sun. The plan is to use this fix along with some tint on the headlight to keep the paint from flaking on the metal in the hottest of situations.

Plasmite · 04-10-2014, 11:05 PM

edconline · 04-12-2014, 02:19 AM

^do not let this deter you from doing your own, it's easy!

Sent from my iPhone using Tapatalk

Nut_N_Much · 04-12-2014, 07:53 PM

Nice fix, thats outside the box for sure.. I finally converted mine back to stock turn signal. I couldn't figure out away to fix that issue. Good job..

Quote:

Originally Posted by edconline

As promised:

I think everyone gets the idea of what is involved here, the metal plate will protect the plastic housing from being melted by the reflected sun. The plan is to use this fix along with some tint on the headlight to keep the paint from flaking on the metal in the hottest of situations.

Plasmite · 04-13-2014, 08:49 AM

Quote:

Originally Posted by edconline

^do not let this deter you from doing your own, it's easy!

Sent from my iPhone using Tapatalk

I want custom lights pretty bad, but Imma scared to bake and reseal

Not to mention I am not all that great with paint.

edconline · 04-13-2014, 10:55 AM

I was nervous about baking too but it's way better than you think. If you decide to do it and want a hand, let me know

Sent from my iPhone using Tapatalk

paperboy42190 · 04-22-2014, 03:04 PM

Good fix. That's pretty much the same thing that I did couple months ago except your metal plate is a nicer design

edconline · 04-23-2014, 09:07 AM

Quote:

Originally Posted by paperboy42190

Good fix. That's pretty much the same thing that I did couple months ago except your metal plate is a nicer design

Yup, you were the inspiration for the plates. Credit where it is due

DIGItonium · 04-23-2014, 12:43 PM

Similar to traffic lights, you'll need a "lid" placed above the lens. You already can see the bright light casting through the lens onto the housing from edconline's pictures.

edconline · 04-23-2014, 12:51 PM

A second 'phase' of the fix was implemented that doesn't involve a lid up top, pretty much eliminates all that reflected light. I'll post pics/details tonight when I get home

Sent from my iPhone using Tapatalk

04-01-2014, 05:28 PM	#16 (permalink)
VDC_OFF A True Z Fanatic Join Date: Aug 2011 Location: Houston (Pearland) Age: 44 Posts: 1,205 Drives: 2011 370Z M6 Rep Power: 16	what I do is after I drill the hole in the shroud and feed the wire through. I then fille the shroud with silicone sealant. Then I push the halo in place and lightly clean the edges. Dont push the halo all the way to the bottom, you want a slight gap so the glue is still exposed. Then you snap the shaved diffuser over the halo until it touches the glue and the inside of the shroud. The glue under the halo will keep the diffuser from falling off. Clean up and continue your wiring. If you really want to be sure its glued put a small dab on your finger and run it along the inside edges of the diffuser. Its clear so you cant see it. __________________ DRIFTING JOURNAL \| Follow me on Instagram \| Facebook \| Houston Halos Last edited by VDC_OFF; 04-01-2014 at 05:30 PM.

04-01-2014, 05:40 PM	#17 (permalink)
vrfreak Enthusiast Member Join Date: Aug 2011 Location: winnipeg, canada Posts: 249 Drives: 2012 Nissan 370Z 6MT Rep Power: 13	Issues with DRL's and painted headlights mhm ok I see what ur saying well I'm gonna b In trouble there I guess cuz I did my lights in like steps kind off and I have my halo already mounted in the big shroud a long time ago so that goop in there is hard! probably have to figure out another way then if I only had my shipment then it would b easier to picture everything! guess I should have waited for everything to arrive first

04-01-2014, 06:53 PM	#18 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 14	Someone suggested a uv clear tint. Might try it out this summer. Ed, if you find a dealer let me know. I still want my drl's off so my Halos actually have a purpose edconline likes this. __________________ Full Mod List

04-01-2014, 07:09 PM	#19 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Agreed James. And I have someone here in Edmonton that will do it he has said we will try mine soon as it's on the road and I'm sure he would do more. I plan to use the acrylic covers (blacked out) at shows from now on, it'll match the rest of the car anyways lol __________________ View Journal Audio Build

04-06-2014, 03:28 AM	#20 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	Updates: More to follow... JMac88 and GaleForce like this. __________________ View Journal Audio Build

04-06-2014, 04:10 PM	#21 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	As promised: I think everyone gets the idea of what is involved here, the metal plate will protect the plastic housing from being melted by the reflected sun. The plan is to use this fix along with some tint on the headlight to keep the paint from flaking on the metal in the hottest of situations. DIGItonium and Nut_N_Much like this. __________________ View Journal Audio Build

04-10-2014, 11:05 PM	#22 (permalink)
Plasmite Enthusiast Member Join Date: Aug 2012 Location: Canada Posts: 259 Drives: '12 M6 Panty Peeler Rep Power: 12	cdoxp800 likes this. __________________ WISHLIST

04-12-2014, 02:19 AM	#23 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	^do not let this deter you from doing your own, it's easy! Sent from my iPhone using Tapatalk __________________ View Journal Audio Build

04-13-2014, 10:55 AM	#26 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	I was nervous about baking too but it's way better than you think. If you decide to do it and want a hand, let me know Sent from my iPhone using Tapatalk Plasmite likes this. __________________ View Journal Audio Build

04-22-2014, 03:04 PM	#27 (permalink)
paperboy42190 Base Member Join Date: Sep 2011 Location: Alhambra, CA Posts: 193 Drives: 2007 Acura TL Type-S Rep Power: 13	Good fix. That's pretty much the same thing that I did couple months ago except your metal plate is a nicer design

04-23-2014, 12:43 PM	#29 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Similar to traffic lights, you'll need a "lid" placed above the lens. You already can see the bright light casting through the lens onto the housing from edconline's pictures. __________________

04-23-2014, 12:51 PM	#30 (permalink)
edconline Track Member Join Date: Mar 2010 Location: Edmonton Posts: 855 Drives: 10' MB Z34 6MT T/S/N Rep Power: 22	A second 'phase' of the fix was implemented that doesn't involve a lid up top, pretty much eliminates all that reflected light. I'll post pics/details tonight when I get home Sent from my iPhone using Tapatalk __________________ View Journal Audio Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
To those with painted headlights...	DIGItonium	Exterior & Interior	47	09-04-2015 08:44 AM
I painted my headlights.	Wonka2581	Exterior & Interior	26	02-13-2013 07:22 PM
Painted Headlights	Grindkiezer	Exterior & Interior	19	01-29-2013 07:58 PM
WTT: my PG painted headlights for your stock headlights	Cjanik	Parts for sale (Private Classifieds)	15	10-27-2010 02:28 PM
MB painted headlights? Anybody?	Z33knight	Exterior & Interior	5	06-10-2010 01:15 PM