![]() |
I know folks don't visit the Vendor Section as often as the Tech Section, so thought I'd spread the word here that we just fabricated some aluminum skid plates for
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Premium Member
![]() Join Date: Jan 2009
Location: Los Angeles
Posts: 1,094
Drives: PW 370Z 7AT/Tr/Sp/Nv
Rep Power: 15 ![]() ![]() ![]() ![]() ![]() |
![]()
I know folks don't visit the Vendor Section as often as the Tech Section, so thought I'd spread the word here that we just fabricated some aluminum skid plates for the Amuse front bumper
![]() Link to sale thread HERE Thanks for looking - hope some of you guys will appreciate the protection this piece will provide! :tip hat: ![]() |
![]() |
![]() |
#3 (permalink) |
A True Z Fanatic
|
![]()
Is it possible for you to fabricate one for other front bumpers as well? For example, Fujimura, Stillen, Zele, etc.?
__________________
Zele Performance | Varis | Powerhouse Amuse | Craftsquare | Tommy Kaira | Top Secret | HKS | Defi | Volk Racing | Cusco | SPL | Never ending build thread.. PM me if you have rare JDM parts for sale! ![]() |
![]() |
![]() |
#4 (permalink) | |
Premium Member
![]() Join Date: Jan 2009
Location: Los Angeles
Posts: 1,094
Drives: PW 370Z 7AT/Tr/Sp/Nv
Rep Power: 15 ![]() ![]() ![]() ![]() ![]() |
![]()
Thanks KaienZ34...you're a gentleman and a scholar!
![]() Quote:
![]() |
|
![]() |
![]() |
#5 (permalink) |
Track Member
Join Date: Mar 2013
Location: Bay Area, CA
Posts: 668
Drives: a silver bullet
Rep Power: 11 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I asked also on the Facebook post. Would be interested in the varis v2 front lip if there are others also.
Sent from my XT1058 using Tapatalk
__________________
'13 & Infinity Swifts Z1 Post-MAF F.I. NST VARIS Tommy Kaira AeroJacket MotorDyne |
![]() |
![]() |
#6 (permalink) |
Elite Member
![]() Join Date: Jun 2012
Location: Calgary
Posts: 13,507
Drives: 14 PW 370Z S/T MT
Rep Power: 152959 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Is the underside of the amuse completely flat (over the points where the skid pate would sit)? It looks from this picture like it is a bit of a raised in the middle section.
![]() Last edited by cooltoy; 03-11-2014 at 12:32 AM. |
![]() |
![]() |
#7 (permalink) |
A True Z Fanatic
Join Date: Jan 2011
Location: St. Louis
Posts: 3,509
Drives: 09 370z
Rep Power: 22 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Wow! AWESOME! !!
__________________
2009 Nissan 370z/2003 Honda Soccer Van Shineauto Amuse Body Kit/UAM Fenders/Bc Br Coilovers/Topspeed Exhaust/Racing Hart Wheels and More My Sexy Beast ![]() |
![]() |
![]() |
#8 (permalink) |
Premium Member
![]() Join Date: Jan 2009
Location: Los Angeles
Posts: 1,094
Drives: PW 370Z 7AT/Tr/Sp/Nv
Rep Power: 15 ![]() ![]() ![]() ![]() ![]() |
![]()
For the most part, yes, it is flat where the skid plate is. Keep in mind the aluminum has some flex in it, so when you attach, it will "hug" the slight variations of the bumper.
|
![]() |
![]() |
#9 (permalink) |
A True Z Fanatic
Join Date: Jun 2011
Location: Madison, WI
Posts: 1,156
Drives: 2009 370Z
Rep Power: 23 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
This is great! I'd get if I had the amuse. Every time I think about getting it, I shudder at how it'd get demolished on every ramp here in the city.
__________________
09 7AT|Stance ProComp 2|Bolt-ons/Uprev|SUR4G|Titan-7 18x10.5|OSG LSD|34 Oil+25 Trans Cooler|Fismo|G-LOC R10/R8|Zeta III L|NLR Wing |
![]() |
![]() |
#10 (permalink) |
A True Z Fanatic
Join Date: Jul 2013
Location: Oak Harbor, WA
Age: 33
Posts: 1,610
Drives: 09 Nismo #0483 PW
Rep Power: 65 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
About time someone produced these!!!!!
__________________
2009 Nismo 370Z and 1975 Datsun 280Z 2+2 - PNW_INC - Legacy_Ohana
Follow me on Instagam @s3zero_z3four |
![]() |
![]() |
#11 (permalink) |
Premium Member
![]() Join Date: Apr 2012
Location: SoCal
Posts: 6,082
Drives: WELL ZED PW 6MT
Rep Power: 35756 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Congratulations! Sell, sell, sell.
__________________
![]() >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete
|
![]() |
![]() |
#13 (permalink) |
Premium Member
![]() Join Date: Jan 2009
Location: Los Angeles
Posts: 1,094
Drives: PW 370Z 7AT/Tr/Sp/Nv
Rep Power: 15 ![]() ![]() ![]() ![]() ![]() |
![]()
I dug up some pics of when I had the prototype on my Z. Front edge was wrapped in matte black vinyl to make it unnoticeable:
![]() ![]() And this will give you an idea of what it will look like mounted beyond the front edge (only difference is ours will not be wider than the front bumper - rather taper to be flush w/ the sides...which is better for angling into driveways, etc.). ![]() |
![]() |
![]() |
#14 (permalink) |
A True Z Fanatic
![]() Join Date: May 2009
Location: Dededo, Guam
Posts: 6,642
Drives: solid red 370z 6mt
Rep Power: 401 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
those are beautiful!!!
__________________
![]() ***TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/***
|
![]() |
![]() |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Skid plates on your front lip or bumper | axmea? | Exterior & Interior | 22 | 03-22-2014 12:59 PM |
amuse front bumper license plate?? | jakexlee | Exterior & Interior | 22 | 06-24-2013 04:09 PM |
Pic Request: Fujimura front bumper w/ Amuse rear bumper | Wonka2581 | Exterior & Interior | 10 | 04-26-2013 07:43 AM |
front plate bracket for amuse bumper | Alexshen1 | Exterior & Interior | 2 | 04-11-2013 10:28 PM |