stock front bumper grill?

joeybosco · 04-18-2013, 11:17 PM

Has anybody done anything with the stock front bumper grill?
Swaps, customized, paint, delete, etc..

slippery4678 · 04-19-2013, 07:54 AM

blacked out fangs...

wstar · 04-19-2013, 08:03 AM

Check here for a DIY thread on putting mesh behind the stock grill, and later in that thread a link to Spohn's setup that I also copied: Nissan Mesh Grill

BeemaaZ · 04-19-2013, 10:27 AM

Quote:

Originally Posted by wstar

Check here for a DIY thread on putting mesh behind the stock grill, and later in that thread a link to Spohn's setup that I also copied: Nissan Mesh Grill

Wow! Thanks, wstar!

The DIY leads me to customcargrills.com which I have been looking for.

DIGItonium · 04-19-2013, 10:33 AM

Some of us put an FMIC behind it

Some cut it out. I've only enlarged the fang opening and left the grill alone. Keen eyes notice what's behind it.

However, I really want a larger vent cutout where the front license plate should be.

Grindkiezer · 04-19-2013, 10:51 AM

Like that?

BeemaaZ · 04-19-2013, 10:54 AM

Quote:

Originally Posted by DIGItonium

Some of us put an FMIC behind it

Some cut it out. I've only enlarged the fang opening and left the grill alone. Keen eyes notice what's behind it.

However, I really want a larger vent cutout where the front license plate should be.

DIGI, can you post pictures of your bumper for us to see? Thanks!

DIGItonium · 04-19-2013, 01:22 PM

You will have to "brighten" up the image. Basically there's an additional 1" of plastic after removing the fang cover. I Dremel the section off, so the mod doesn't make the bumper look silly. I've always wanted some sort of CF duct where the front license plate would be, or something similar to the Evo. It's there, but doesn't stick out like a sore thumb.

JARblue · 04-19-2013, 01:39 PM

I did this mod for about $7 not including paint. I have not yet cut out the plastic, however. I just need to grow a pair

Official Cheap Mod Thread There is also a link to my album in this post.

Trips · 04-19-2013, 01:49 PM

Here's mine

I got the idea from SPHON

joeybosco · 04-20-2013, 12:34 AM

I want to see a white Z with the plastic pieces painted white. Cooltoy?

cooltoy · 04-20-2013, 11:13 AM

Nut_N_Much · 04-20-2013, 04:26 PM

joeybosco · 04-21-2013, 01:07 AM

Quote:

Originally Posted by cooltoy

Thank you!!! Looks good to me. Opinions guys?.

Nut_N_Much · 04-21-2013, 08:30 AM

I likes

, makes it stand out, but it is a lot of white..

04-18-2013, 11:17 PM	#1 (permalink)
joeybosco Base Member Join Date: Nov 2012 Location: New York Posts: 158 Drives: slow. Rep Power: 12	stock front bumper grill? Has anybody done anything with the stock front bumper grill? Swaps, customized, paint, delete, etc.. __________________ Avant Garde M310's l Eibach springs l K&N typhoon intakes l Custom Axleback

04-19-2013, 07:54 AM	#2 (permalink)
slippery4678 Base Member Join Date: Jul 2010 Location: S. Jerz/Arlington VA Posts: 58 Drives: 2010 370z PG + sport Rep Power: 14	blacked out fangs... __________________ Stillen CBE \| Berk HFC's \| Intake Plenum \| AAM UpRev Tune \| Swift Spec-R Springs \| H&R 15/20 Spacers \| 265/285's \| Stillen Sways \| 20% tint

04-19-2013, 08:03 AM	#3 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Check here for a DIY thread on putting mesh behind the stock grill, and later in that thread a link to Spohn's setup that I also copied: Nissan Mesh Grill BeemaaZ and Rusty like this. __________________ 7AT Track Car! Journal thread / Car setup details

04-19-2013, 10:33 AM	#5 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	Some of us put an FMIC behind it Some cut it out. I've only enlarged the fang opening and left the grill alone. Keen eyes notice what's behind it. However, I really want a larger vent cutout where the front license plate should be. XwChriswX and BeemaaZ like this. __________________

04-19-2013, 10:51 AM	#6 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 13	Like that? Nut_N_Much and falicfr like this. __________________ Z

04-19-2013, 01:22 PM	#8 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	You will have to "brighten" up the image. Basically there's an additional 1" of plastic after removing the fang cover. I Dremel the section off, so the mod doesn't make the bumper look silly. I've always wanted some sort of CF duct where the front license plate would be, or something similar to the Evo. It's there, but doesn't stick out like a sore thumb. __________________

04-19-2013, 01:39 PM	#9 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	I did this mod for about $7 not including paint. I have not yet cut out the plastic, however. I just need to grow a pair Official Cheap Mod Thread There is also a link to my album in this post. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \| Last edited by JARblue; 04-19-2013 at 02:01 PM.

04-19-2013, 01:49 PM	#10 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,728 Drives: 🔰 Rep Power: 10	Here's mine I got the idea from SPHON DIGItonium, BeemaaZ and Nut_N_Much like this. __________________

04-20-2013, 12:34 AM	#11 (permalink)
joeybosco Base Member Join Date: Nov 2012 Location: New York Posts: 158 Drives: slow. Rep Power: 12	I want to see a white Z with the plastic pieces painted white. Cooltoy? __________________ Avant Garde M310's l Eibach springs l K&N typhoon intakes l Custom Axleback

04-20-2013, 04:26 PM	#13 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	__________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

04-21-2013, 08:30 AM	#15 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	I likes , makes it stand out, but it is a lot of white.. joeybosco likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTT SoCAL: CF Spoiler for Stock SILVER & Front Bumper w/ Lip and Stash for Stock	Juan@AEperformance	Parts for sale (Private Classifieds)	6	01-10-2012 01:32 PM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 08:25 PM
Bumper grill chips?	resdm50	Exterior & Interior	3	04-16-2010 12:50 AM
Front bumper grill?	Z-WHIZ	Exterior & Interior	11	03-27-2010 06:49 PM
WTB: stock front bumper?	DJcuetip	Parts for sale (Private Classifieds)	1	10-07-2009 10:57 AM