Carbon Fiber B pillars ready to order!

SpawnAeroJohn

Carbon fiber B pillars ready to order!

No these are not overlays.
No these are not carbon fiber skinned products with fiberglass backings.

These are 3 layers of pure grade A carbon fiber layered over each other in different angles for a strong great looking authentic carbon fiber product!

Yes they are guaranteed for the life of your car.
Yes they are direct replacements!
Yes they fit as perfect as the OEM ones.

No gaps, no crooked lines, no waves or ripples like on our competitor products (the cheaper ones)

Some companies sell these for $250.00
the370z.com price $199.99!


How to install??

Pop off the old ones (They pop off like legos, no bolts or screws)
Clean the area with degreaser and move the gaskets to the new B pillars.
Remove the 3M backing on the B pillars, line them up, and press! Takes a few min to install!
Close the door, step back, and enjoy

Guaranteed fit!

Keep in mind even though we have competitors that offer these for less than $150. Think of it this way. The way we make ours is with vacuum infusion. The molds are laid up dry and held under a vacuum bag for an hr before infusing the products with resin. Doing that ensures each product is made with out any contaminants such as moisture or air. We then infuse each product with 100% epoxy resin which we all know is 10x better for carbon fiber than any other resin. Now we don’t know how our competitors are doing it for so cheap. But if other companies can do it cheaper. Then its safe to say they are using cheaper materials. Cheaper resins cant take heat, fade, crack, chip, and have a blue tint to them.

Here are some pics. And judge for your selves. All our products are guaranteed quality!

In the mold


Out the mold


The back 100% carbon fiber and epoxy resin.


At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb)


And the two together before final sanding and clear coating.






Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P.

P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there.

PM to order!