Carbon Fiber B pillars ready to order!

SpawnAeroJohn · 07-08-2009, 09:23 PM

Carbon fiber B pillars ready to order!

No these are not overlays.
No these are not carbon fiber skinned products with fiberglass backings.

These are 3 layers of pure grade A carbon fiber layered over each other in different angles for a strong great looking authentic carbon fiber product!

Yes they are guaranteed for the life of your car.
Yes they are direct replacements!
Yes they fit as perfect as the OEM ones.

No gaps, no crooked lines, no waves or ripples like on our competitor products (the cheaper ones)

Some companies sell these for $250.00
the370z.com price $199.99!

How to install??

Pop off the old ones (They pop off like legos, no bolts or screws)
Clean the area with degreaser and move the gaskets to the new B pillars.
Remove the 3M backing on the B pillars, line them up, and press! Takes a few min to install!
Close the door, step back, and enjoy

Guaranteed fit!

Keep in mind even though we have competitors that offer these for less than $150. Think of it this way. The way we make ours is with vacuum infusion. The molds are laid up dry and held under a vacuum bag for an hr before infusing the products with resin. Doing that ensures each product is made with out any contaminants such as moisture or air. We then infuse each product with 100% epoxy resin which we all know is 10x better for carbon fiber than any other resin. Now we don’t know how our competitors are doing it for so cheap. But if other companies can do it cheaper. Then its safe to say they are using cheaper materials. Cheaper resins cant take heat, fade, crack, chip, and have a blue tint to them.

Here are some pics. And judge for your selves. All our products are guaranteed quality!

In the mold

Out the mold

The back 100% carbon fiber and epoxy resin.

At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb)

And the two together before final sanding and clear coating.

Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P.

P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there.

PM to order!

bullitt5897 · 07-08-2009, 09:30 PM

AWESOME JOHN!!! Those will look great on my car for the ride home

Nikon FM · 07-08-2009, 10:49 PM

bullitt5897

If you could shoot some pictures and describe the install that would be helpful.

Thanks!

RCZ · 07-08-2009, 11:29 PM

^ wtf haha

Cool, I'm waiting for pics too

SpawnAeroJohn · 07-08-2009, 11:29 PM

I can post install pictures and a how to when I install it since Ill be installing it a day or 2 before bullitt comes down to pick up his car. He also said hell be bringing his pro cam so we can take some good pictures. Then I or he can post em up!

bullitt5897 · 07-09-2009, 12:07 AM

The camera will be with me saturday

I will give you copies of the pics too

ZforMe · 07-09-2009, 02:45 PM

So the black plastic piece comes off right?

Weight savings?? LOL

xiven · 07-09-2009, 03:00 PM

Quote:

Originally Posted by bullitt5897

The camera will be with me saturday

I will give you copies of the pics too

What will you have on there besides the pillars? Give me a call when you get back so I can check it out.

SpawnAeroJohn · 07-09-2009, 03:13 PM

Quote:

Originally Posted by ZforMe

So the black plastic piece comes off right?

Weight savings?? LOL

I actually think they weigh more than the black plastic ones.

Juuust kidding. Its equal or less. I didnt get a chance to weigh it yet but Ill get results tonight.

Its made up of 3 layers of 5.7oz cf.

takimbe · 07-09-2009, 07:24 PM

yep, im interested. let me know how easy it is to do and maybe ill buy a set!

FuszNissan · 07-09-2009, 07:30 PM

John they look great, what about the window delete? Are you still planning on making these? Sorry, not to change the subject.

SpawnAeroJohn · 07-09-2009, 08:10 PM

As of now no window deletes unless we get another Z here any time after Sat the 11th. Id like to make them but we didnt have any time

209Z · 07-09-2009, 08:33 PM

once i see it in on the 370z if it will look good i will def buy =]

OMGWTFBBQ · 07-09-2009, 08:35 PM

If the stock black piece comes off and these go in easily with no gaps or anything like that, let me know which payment methods you prefer/accept.

355890 · 07-09-2009, 09:48 PM

I don't see any pictures.....

07-08-2009, 09:23 PM	#1 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	Carbon Fiber B pillars ready to order! Carbon fiber B pillars ready to order! No these are not overlays. No these are not carbon fiber skinned products with fiberglass backings. These are 3 layers of pure grade A carbon fiber layered over each other in different angles for a strong great looking authentic carbon fiber product! Yes they are guaranteed for the life of your car. Yes they are direct replacements! Yes they fit as perfect as the OEM ones. No gaps, no crooked lines, no waves or ripples like on our competitor products (the cheaper ones) Some companies sell these for $250.00 the370z.com price $199.99! How to install?? Pop off the old ones (They pop off like legos, no bolts or screws) Clean the area with degreaser and move the gaskets to the new B pillars. Remove the 3M backing on the B pillars, line them up, and press! Takes a few min to install! Close the door, step back, and enjoy Guaranteed fit! Keep in mind even though we have competitors that offer these for less than $150. Think of it this way. The way we make ours is with vacuum infusion. The molds are laid up dry and held under a vacuum bag for an hr before infusing the products with resin. Doing that ensures each product is made with out any contaminants such as moisture or air. We then infuse each product with 100% epoxy resin which we all know is 10x better for carbon fiber than any other resin. Now we don’t know how our competitors are doing it for so cheap. But if other companies can do it cheaper. Then its safe to say they are using cheaper materials. Cheaper resins cant take heat, fade, crack, chip, and have a blue tint to them. Here are some pics. And judge for your selves. All our products are guaranteed quality! In the mold Out the mold The back 100% carbon fiber and epoxy resin. At the scale they weigh 1 oz each. Yours will weigh 1.2 - 1.5 oz each. (16 oz in a lb) And the two together before final sanding and clear coating. Quality guarantee! These can be direct replacements or overlays. Will come with enough 3M tape to take care of the whole job + a little extra for those who need to do everything twice before getting it right :P. P.S You cant tell with out the clear coat but the body line that the original ones have going vertically will also be there. PM to order! Last edited by SpawnAeroJohn; 08-09-2009 at 05:12 PM.

07-08-2009, 09:30 PM	#2 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	AWESOME JOHN!!! Those will look great on my car for the ride home __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

07-08-2009, 10:49 PM	#3 (permalink)
Nikon FM Track Member Join Date: Jan 2009 Location: Snoqualmie WA Posts: 973 Drives: 03 996TT Porsche Rep Power: 606	bullitt5897 If you could shoot some pictures and describe the install that would be helpful. Thanks! __________________ Buddy Revell: "One man's sooner is another man's later"

07-09-2009, 12:07 AM	#6 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	The camera will be with me saturday I will give you copies of the pics too __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

07-09-2009, 02:45 PM	#7 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	So the black plastic piece comes off right? Weight savings?? LOL __________________ 13.369 @ 102.73 Bone Stock. BERK HFC's installed 5/14/09 @ 1490miles, 13.212 @ 106.15. Cobb Post MAF Hoses installed 3/20/10 @ 5,043miles, future: FI exhaust with 18" res and s/s cans.

07-08-2009, 11:29 PM	#4 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	^ wtf haha Cool, I'm waiting for pics too

07-08-2009, 11:29 PM	#5 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	I can post install pictures and a how to when I install it since Ill be installing it a day or 2 before bullitt comes down to pick up his car. He also said hell be bringing his pro cam so we can take some good pictures. Then I or he can post em up!

07-09-2009, 07:24 PM	#10 (permalink)
takimbe Base Member Join Date: Feb 2009 Location: San Diego, CA Posts: 223 Drives: 09' PG 370Z w/SP Rep Power: 264	yep, im interested. let me know how easy it is to do and maybe ill buy a set! __________________ Stillen G3 Intakes/CBE/Pulley/Grounding Kit/Sways/Front lip \|Megan Racing Spec-RS Coils \|Amuse rear \|S-Tune Spoiler \|CF B-Pillars \|Forgestar F14 20" Bronze Burst (soon) \|Kenwood 7" HU \|Boston Acoustics speakers/Sub \|Kenwood Excelon Amp \|\|EVO-R Side Blades

07-09-2009, 07:30 PM	#11 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 541	John they look great, what about the window delete? Are you still planning on making these? Sorry, not to change the subject. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

07-09-2009, 08:10 PM	#12 (permalink)
SpawnAeroJohn NOT A CURRENT VENDOR Join Date: Jun 2009 Location: Chicago Posts: 609 Drives: you Rep Power: 16	As of now no window deletes unless we get another Z here any time after Sat the 11th. Id like to make them but we didnt have any time

07-09-2009, 08:33 PM	#13 (permalink)
209Z A True Z Fanatic Join Date: Mar 2009 Location: Stockton, Cali (209) Posts: 1,058 Drives: 09 370z Rep Power: 278	once i see it in on the 370z if it will look good i will def buy =] __________________ Team Blur My Build Thread Fast Intentions\|KWS\|BERK\|Carbon Fiber Element\| SEIBON\|Memphis Car Audio\| Status Autoworks\|Lusso Forged\|Autohaus\|PWJDM\|SPC

07-09-2009, 08:35 PM	#14 (permalink)
OMGWTFBBQ A True Z Fanatic Join Date: Jan 2009 Location: the OC Posts: 1,886 Drives: 08 SGM IS350 Rep Power: 4549	If the stock black piece comes off and these go in easily with no gaps or anything like that, let me know which payment methods you prefer/accept. __________________ Zele Performance \| Varis \| Powerhouse Amuse \| Craftsquare \| Tommy Kaira \| Top Secret \| HKS \| Defi \| Volk Racing \| Cusco \| SPL \| Never ending build thread.. PM me if you have rare JDM parts for sale!

07-09-2009, 09:48 PM	#15 (permalink)
355890 Enthusiast Member Join Date: Mar 2009 Location: Austin, Texas Posts: 416 Drives: GP Z Base+Sport (6m) Rep Power: 541	I don't see any pictures..... __________________ *"Burnley Football Club supporter" ENGLAND...ENGLAND...ENGLAND*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Carbon Fiber Rims	armensti	Wheels & Tires	41	03-14-2013 12:21 PM
Carbon fiber stuff	SpawnAeroJohn	Exterior & Interior	47	07-26-2011 12:01 PM
Carbon fiber doors	SpawnAeroJohn	Exterior & Interior	19	06-26-2009 05:41 PM
Carbon Fiber Fenders	SpawnAeroJohn	Exterior & Interior	20	06-16-2009 08:42 PM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 09:32 PM