OBDII and Kiwi

370z_2910 · 12-05-2012, 10:55 PM

I have bought the 1st version kiwi device and it does not detected my z.

I've contacted the kiwi support and still having the same result.

Rumors, that my z is being locked by nissan from scanning my own obd2.

Reason, need to pay their diagnostics device only.

Solution, please

Jmazz · 12-10-2012, 02:49 AM

Quote:

I have bought the 1st version kiwi device and it does not detected my z.

I've contacted the kiwi support and still having the same result.

Rumors, that my z is being locked by nissan from scanning my own obd2.

Reason, need to pay their diagnostics device only.

Solution, please
Like

Hey 2910 i had the same issue with reading my port as well. There is a little white push switch that fits over the 10 A Electrics fuse that comes to the dealer in the off position, they then push it in on delivery. Except my dealer didnt do that. Your switch may still in extended storage mode and therefore preventing you from reading your port. Hope that helps.

DR_ · 12-10-2012, 08:34 AM

Quote:

Originally Posted by Jmazz

Hey 2910 i had the same issue with reading my port as well. There is a little white push switch that fits over the 10 A Electrics fuse that comes to the dealer in the off position, they then push it in on delivery. Except my dealer didnt do that. Your switch may still in extended storage mode and therefore preventing you from reading your port. Hope that helps.

Good answer. On another note if you leave anything plugged into your OBDII it will drain your battery quicker. When I first got the Dashhawk it did this so I bought a OBDII switch that plugs in between the port and the cable.
I don't know if my Kiwi II drains the battery as it has an auto shutoff. However I do know that I have to turn it on every time I use it which is a PITA.

dastaco · 12-10-2012, 09:02 AM

Quote:

Originally Posted by DR_

Good answer. On another note if you leave anything plugged into your OBDII it will drain your battery quicker. When I first got the Dashhawk it did this so I bought a OBDII switch that plugs in between the port and the cable.
I don't know if my Kiwi II drains the battery as it has an auto shutoff. However I do know that I have to turn it on every time I use it which is a PITA.

Are you sure that it drains your battery when plugged in? I leave mine plugged in at all times and if this is true i'll have to stop doing so... but this is the first i've ever heard of this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PLX Kiwi Bluetooth Devices	Chuck@Z1	Z1 Motorsports	13	03-05-2014 09:51 AM
PLX Kiwi Wifi, Dash Command, iPhone 4	spearfish25	Exterior & Interior	20	09-02-2013 07:30 PM
PLX Kiwi Wifi OBD II Dongle for iPhone, iPod, iPad	Jsolo	Misc Items for sale (No Z stuff)	3	08-28-2012 02:22 PM
PLX Kiwi OBD II Monitors for iPhone and Android now available @ Z1 Motorsports	Dustin@Z1	Drivetrain/Engine	18	06-08-2012 11:08 AM
OBDII - CAN-BUS port?	370Z Purist	Nissan 370Z General Discussions	2	06-27-2009 01:43 PM

12-05-2012, 10:55 PM	#1 (permalink)
370z_2910 Base Member Join Date: Sep 2009 Location: BRUNEI Posts: 127 Drives: 370Z Rep Power: 17	I have bought the 1st version kiwi device and it does not detected my z. I've contacted the kiwi support and still having the same result. Rumors, that my z is being locked by nissan from scanning my own obd2. Reason, need to pay their diagnostics device only. Solution, please