Touring Seat Installation Help - No power or Heat!

SouthArk370Z

My harness is attached to the seat frame and then goes under the carpet. I didn't pull up the carpet to check the harness routing, but, according to the FSMs, the connector on the other end of the harness is in the center console. I could not swear that the harness doesn't physically go to the door sill first. I'm assuming that they took they shortest possible route and the harness passes either in front of or behind the seat rails and then heads straight for the console.

It would take more digging than I have time for right now to verify this, but I believe the heater switches have their own connector with power in and outputs to heating pads. You can look at the SE FSM under the System Wiring and Terminal Layout sections to get a better idea of how the switches/heaters are wired. Seatbelt and airbag info are in the SBC and SRC sections, respectively.

Edit: Keep in mind that I am only going by what I read in the FSMs. I've never attempted a project like this nor am I 100% sure that I am interpreting the FSMs properly. I'm just trying to give you some hints until someone that knows what they are talking about shows up.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma