Touring Seat Installation Help - No power or Heat!

Mr&Mrs

Im so confused. So im going to get a bunch of lights when I put in my aftermarket seats? I hope there is some kind of bypass plug I can use.

__________________
Project Z <--Click - Check out the link too many mods to list!

martin82

My 2012 was prewired, to see if you have the wiring you can pop the cup holder and you will see 2 plugs for the heated switch wiring and under the seat if u look there is an extra plug not being use. If you have these then the car is pre wired. The only thing I didn't confirm was if the relay was actually there but since there is power going to the seats, should be working.....

I told OP that posted this, he will just need to use a relay and wire it straight to battery....

SouthArk370Z

If you can mount the seat belt buckle assemblies to the new seats, that should take care of that warning. Somewhere on this site, there is a DIY explaining how to use resistors to get around the air bag warning. There is also a DIY on removing the passenger weight sensor and installing it in a new seat - requires upholstery work, so that's out of my league - but I can't remember if it is on this site.

__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma