OEM shift knob removal (SEARCHED)

madeinjapan · 08-04-2016, 07:16 AM

Quote:

Originally Posted by forgot pw

K don't want know wtf this is...

ricer dildo knob

forgot pw · 08-04-2016, 07:31 AM

Ricky_t98 · 08-09-2016, 01:24 AM

Quote:

Originally Posted by FromG2Z

ALRIGHT!!! Thank you to everyone on this forum. I got it done! I used a combination of everyone's suggestions and it worked like a charm

So I used:

1) Robo-grip pliers and rubber protection on plier teeth (both from Sears)
2) Strap wrench (from Sears)

That's it!

Since the Robo-grip pliers had the red rubber protection, I used my left hand and gripped it straight on the shaft after lowering the boot. No marring on the shaft. Then I used my right hand on the strap wrench straight on the stock knob. Voila! It gave IMMEDIATELY. No marring on the knob whatsoever. It was a matter of having the right tools and the right leverage. That stock knob was on there tight though, after loosening it with the strap wrench, I figured I could just loosen it the rest of the way with my hands... but I was wrong. I pretty much had to use the strap wrench all the way till the knob was almost off.

This was my setup. You can see the robo pliers on the left, and the strap wrench on the knob. What a wonderful combo.

Stock knob is off!!! No damage to it (front and back)!!! Look at ALL that Loctite on the shaft threads!!!

And here she is all installed!!! I love it!!!

I was surprised the whole affair took me 15 minutes total... just needed the right tools... amazing. I love the new Nismo knob on there. I haven't driven her yet, but am looking forward to it!!! It looks and feels good though however... exactly the look I am looking for.

Thank you again to EVERYone who chimed in and the existing DYI's posted in this forum. You guys are a tremendous help.

Where did you get the nismo titanium shift knob?

David0876 · 09-06-2016, 03:45 PM

What do you think about using 2 strap wrenches for bottom and top? Instead using a Robo-grip pliers.

Ventruck · 09-08-2016, 10:18 PM

I was a lucky one and didn't have much of a struggle or sacrifice the stock knob. Did the patented setup here, except I used a bicycle tire to line the shaft. Didn't need the duct tape but surely needed to use the pipe wrench for at least like 5 full turns.

Also didn't have much leverage. I think I was using 7-9 inch handles for both tools. That lucky, I guess.

cooltoy · 09-08-2016, 11:19 PM

Quote:

Originally Posted by Ricky_t98

Where did you get the nismo titanium shift knob?

How does Google mange to stay in business, I'll never know.

Motorsport! NISMO Titanium Shift Knob, 300ZX-350Z - The Z Store! Nissan-Datsun 240Z 260Z 280Z 280ZX 300ZX ( Z31 Z32 ) 350Z 370Z Parts

Shift Knobs - Nissan 370Z / 350Z Nismo Titanium Shift Knob

Nismo Titanium Shift Knob

charnathan · 09-09-2016, 04:57 PM

Quote:

Originally Posted by cooltoy

How does Google mange to stay in business, I'll never know.

Motorsport! NISMO Titanium Shift Knob, 300ZX-350Z - The Z Store! Nissan-Datsun 240Z 260Z 280Z 280ZX 300ZX ( Z31 Z32 ) 350Z 370Z Parts

Shift Knobs - Nissan 370Z / 350Z Nismo Titanium Shift Knob

Nismo Titanium Shift Knob

too bad most places are sold out of it. Maybe you should note that before you create a smart@$$ remark.

I do question the validity of your second link. The only reason why is because Courtesy Nissan had it listed on several links as "in stock" and they cancelled my order. I had to call them and they said they are completely sold out and have been for years.

But very jealous of those who do have the titanium shift knob.

08-04-2016, 07:31 AM	#167 (permalink)
forgot pw Enthusiast Member Join Date: Jul 2016 Location: Iggyland Posts: 409 Drives: enterTrollment Rep Power: 2512	__________________ temporary newb suit.. i hope

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: AT Shift knob removal/replacement	Imtired	DIY Section (Do-It-Yourself)	43	04-07-2016 10:24 AM
AT Knob Removal - Help.	chippy	Exterior & Interior	30	11-08-2010 02:58 PM
New Shift Knob... let's try this again!	m4a1mustang	Exterior & Interior	19	06-22-2009 06:41 PM
Shift knob HELp!	DJcuetip	Southern California Region	0	06-16-2009 06:58 AM
S2K Aluminum shift knob to replace OEM knob	initialgemini	Exterior & Interior	12	04-19-2009 02:56 PM

09-06-2016, 03:45 PM	#169 (permalink)
David0876 Base Member Join Date: Jul 2016 Location: Lomita, CA Posts: 1 Drives: 16 Nissan 370z BL M6 Rep Power: 3	What do you think about using 2 strap wrenches for bottom and top? Instead using a Robo-grip pliers.

09-08-2016, 10:18 PM	#170 (permalink)
Ventruck Enthusiast Member Join Date: Jun 2016 Location: California Posts: 379 Drives: '13 Sport+Touring M6 Rep Power: 3	I was a lucky one and didn't have much of a struggle or sacrifice the stock knob. Did the patented setup here, except I used a bicycle tire to line the shaft. Didn't need the duct tape but surely needed to use the pipe wrench for at least like 5 full turns. Also didn't have much leverage. I think I was using 7-9 inch handles for both tools. That lucky, I guess.