Easy & Clean Radar Install

billydsz · 10-02-2009, 09:11 PM

I got my mount and invisicord in the mail today and just finished the install. Looks great.

One little hiccup I had is my homelink connector had a black with red stripe, a black with yellow stripe and a black with white stripe wires. I didn't have a solid black wire in my homelink connector. Just a heads up for anyone else that has this situation, the black with white is ground and the black with red is switched power.

Minicobra1 · 10-03-2009, 03:54 PM

Quote:

Originally Posted by billydsz

I got my mount and invisicord in the mail today and just finished the install. Looks great.

One little hiccup I had is my homelink connector had a black with red stripe, a black with yellow stripe and a black with white stripe wires. I didn't have a solid black wire in my homelink connector. Just a heads up for anyone else that has this situation, the black with white is ground and the black with red is switched power.

Thanks for the tip

I think I will order my mount and cord later today.

kenchan · 10-09-2009, 01:29 PM

...and watch, you'll get pulled over at that spot you tagged next time.

getmecoffee · 12-20-2009, 07:33 PM

Would this Add-A-Circuit from Amazon also work with the V1 radar if you wanted to connect?

Amazon.com: Littelfuse FHM200BP ATO Add-A-Circuit Kit: Automotive

Modshack · 12-21-2009, 08:43 AM

Quote:

Originally Posted by getmecoffee

Would this Add-A-Circuit from Amazon also work with the V1 radar if you wanted to connect?

Amazon.com: Littelfuse FHM200BP ATO Add-A-Circuit Kit: Automotive

That link says ATO, but a Mini-blade is pictured and described. You want to use a Mini-blade tap. Here's another source:
ADD A CIRCUIT from Parts Express ship same day and come with 45 day money back guarantee. Free Shipping Available. Order free 10,000 product catalog.

getmecoffee · 12-21-2009, 09:40 PM

Thanks!

lastblueprint · 06-02-2010, 09:59 AM

I’m currently running through some problems, I have the Invisicord wire for the home link but do not fit or I’m not installing it right, is there something wrong I’m doing? Did I order the right Invisicord?

Here are some pictures

tjlazer · 06-02-2010, 10:37 AM

You got the right cord. It's a very tight fit. Make sure the probes are flat and then slide them into the back of the wiring harness. You might have to move the wires around to make some room for the probe to slide in. It's a PITA. Might need some needle nose pliers also to push the probes in tight. Be careful you can break the probes easily. I found placing the probes in the top part of the harness worked better for me... Keep trying you'll get it.

lastblueprint · 06-02-2010, 01:41 PM

Thanks man, I'll give it another try. Thanks for the help, Ill let you guys know if it worked with no issues.

lastblueprint · 06-02-2010, 03:47 PM

Got it done, Thanks for the heads up. It was a pain pusching that in but it was done.

Osiris · 06-02-2010, 06:59 PM

Quote:

Originally Posted by lastblueprint

Got it done, Thanks for the heads up. It was a pain pusching that in but it was done.

That's what she said!!!

lastblueprint · 06-02-2010, 09:24 PM

That's funny,

Thats what she said.

Thanks. Now moving to the next mod, I'll be posting it up soon!

Osiris · 06-05-2010, 09:52 PM

Can anyone with 2010 370 confirm that the stem is 23mm? My Z is will arrive this upcoming week, want to get my order in for the bracket.

plato · 11-15-2010, 03:00 AM

does anybody have an update on which mount to get for a 2010 touring Z?

Osiris · 11-16-2010, 08:30 AM

Quote:

Originally Posted by plato

does anybody have an update on which mount to get for a 2010 touring Z?

23mm

10-02-2009, 09:11 PM	#1 (permalink)
billydsz Enthusiast Member Join Date: Aug 2009 Location: New Bern Posts: 252 Drives: 9 370z SptCp SRd 7AT Rep Power: 16	I got my mount and invisicord in the mail today and just finished the install. Looks great. One little hiccup I had is my homelink connector had a black with red stripe, a black with yellow stripe and a black with white stripe wires. I didn't have a solid black wire in my homelink connector. Just a heads up for anyone else that has this situation, the black with white is ground and the black with red is switched power. BeemaaZ likes this.

06-02-2010, 09:59 AM	#7 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 16	I’m currently running through some problems, I have the Invisicord wire for the home link but do not fit or I’m not installing it right, is there something wrong I’m doing? Did I order the right Invisicord? Here are some pictures __________________ 2010 370z 40th Anniversary Last edited by lastblueprint; 06-02-2010 at 10:13 AM.

06-02-2010, 10:37 AM	#8 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 53 Posts: 2,496 Drives: Z34, R35 Rep Power: 20	You got the right cord. It's a very tight fit. Make sure the probes are flat and then slide them into the back of the wiring harness. You might have to move the wires around to make some room for the probe to slide in. It's a PITA. Might need some needle nose pliers also to push the probes in tight. Be careful you can break the probes easily. I found placing the probes in the top part of the harness worked better for me... Keep trying you'll get it. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 06-02-2010 at 10:40 AM.

06-02-2010, 01:41 PM	#9 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 16	Thanks man, I'll give it another try. Thanks for the help, Ill let you guys know if it worked with no issues. __________________ 2010 370z 40th Anniversary

06-02-2010, 03:47 PM	#10 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 16	Got it done, Thanks for the heads up. It was a pain pusching that in but it was done. __________________ 2010 370z 40th Anniversary

10-09-2009, 01:29 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	...and watch, you'll get pulled over at that spot you tagged next time.

12-20-2009, 07:33 PM	#4 (permalink)
getmecoffee Base Member Join Date: Nov 2009 Location: NY Posts: 52 Drives: Nissan 370Z Rep Power: 16	Would this Add-A-Circuit from Amazon also work with the V1 radar if you wanted to connect? Amazon.com: Littelfuse FHM200BP ATO Add-A-Circuit Kit: Automotive

12-21-2009, 09:40 PM	#6 (permalink)
getmecoffee Base Member Join Date: Nov 2009 Location: NY Posts: 52 Drives: Nissan 370Z Rep Power: 16	Thanks!

06-02-2010, 09:24 PM	#12 (permalink)
lastblueprint Enthusiast Member Join Date: Apr 2010 Location: Moreno valley Posts: 273 Drives: 370z 40th ann. Rep Power: 16	That's funny, Thats what she said. Thanks. Now moving to the next mod, I'll be posting it up soon! __________________ 2010 370z 40th Anniversary

06-05-2010, 09:52 PM	#13 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 20	Can anyone with 2010 370 confirm that the stem is 23mm? My Z is will arrive this upcoming week, want to get my order in for the bracket.

11-15-2010, 03:00 AM	#14 (permalink)
plato Base Member Join Date: Nov 2010 Location: Los Angeles, CA Posts: 88 Drives: 2010 370Z 7AT Rep Power: 15	does anybody have an update on which mount to get for a 2010 touring Z?

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Blinder installation and radar detector hardwire	semtex	DIY Section (Do-It-Yourself)	65	07-29-2012 07:49 PM
Where are you putting your radar detector?	LiquidZ	Nissan 370Z General Discussions	37	03-14-2012 07:12 PM
Hardwire Radar Detector	zero610	Audio & Video	7	03-04-2009 07:52 PM
Radar Detector	Jungle Prop	Nissan 370Z General Discussions	27	01-27-2009 11:53 PM
Yet another site to keep on your radar for all things Z	cstr_Cali	Nissan 370Z General Discussions	8	11-29-2008 03:15 AM