Official GO PRO HD 370Z Owners Thread:Mounting Tips, tricks, Pictures, Videos Inside

[KaienZ34]

Just helping embed the vid, not mine same as above.

[joel mac]

Thanks man not sure why it wouldn't show up that's what the giant white space is haha I used [/YOUTUBEHD][/YOUTUBE] and all i get is a giant white box lol

Some one asked me what mic it was incase any of you are curious
http://www.rodemic.com/microphones/videomicgo

[Hammtastic]

Bought the Go Pro Hero 4 the other day and did some testing with it. I used the suction cup attachment and mounted in at the top of the back window in the center, using the vertical defrosting line as point of reference.

Only settings changed were:

1080p 60fps - narrow view
Up/Dn - Dn (camera is hanging upside down)

Overall, love the narrow view, tell me what you think.

[Hammtastic]

I assume putting the windshield in the middle of the camera and turning on Spot will fix the brightness issue and not being able to see the road.

[osbornsm]

Ahh, just found this thread...

This weekend's contribution. Mounted GoPro Hero 3 w/ suction cup on the rear 1/4 window.

[FPenvy]

soooo i'm lazy and dont feel like going through all 13 pages to find the answer.

so i'll post the question here.

whats is the best mount to use/buy to get some footage from my rear bumper. people continually keep begging me for actual driving footage of my exhaust insted of standing rev's.

got the gopro just dont know which mount is best.

also anyone have suggestions for a external mic setup to capture the sound properly.

any help is greatly appreciated.

[Rusty]

Originally Posted by FPenvy

soooo i'm lazy and dont feel like going through all 13 pages to find the answer.

so i'll post the question here.

whats is the best mount to use/buy to get some footage from my rear bumper. people continually keep begging me for actual driving footage of my exhaust insted of standing rev's.

got the gopro just dont know which mount is best.

also anyone have suggestions for a external mic setup to capture the sound properly.

any help is greatly appreciated.

Hey lazy bones,
Use the suck cup. For a mike. I got mine from amazon. You have to get an adapter too. Put a BIG piece of foam over the mike to cut down on wind noise. Also get a polarized len too. Helps with the white-out that you may get from going into and out of shade, and bright sunlight.

http://www.amazon.com/GoPro-AMCCC-30...ds=gopro+mikes

Amazon.com: Neewer 3.5mm Hands Free Computer Clip on Mini Lapel Microphone (5X Lapel Microphone): Electronics


http://www.amazon.com/Polarizer-Filt...larizer+filter

[FPenvy]

Originally Posted by Rusty

Hey lazy bones,
Use the suck cup. For a mike. I got mine from amazon. Also get a polarized len too.

http://www.amazon.com/GoPro-AMCCC-30...ds=gopro+mikes


http://www.amazon.com/Polarizer-Filt...larizer+filter

how would you rate your mic set-up?

[Rusty]

Originally Posted by FPenvy

how would you rate your mic set-up?

Good. I tape the mike between the tips under the plate. I use a piece of foam that's about 3" in diameter over the mike. Also you will have to get an extension cord for the mike. I got one from Staples.

[FPenvy]

Originally Posted by Rusty

Good. I tape the mike between the tips under the plate. I use a piece of foam that's about 3" in diameter over the mike. Also you will have to get an extension cord for the mike. I got one from Staples.

yea i figured a 3.5mm is just an aux cord i can find anywhere.

i see a couple little fuzzy wind protectors for sale on amazon as well

[Cbtech]

Originally Posted by FPenvy

soooo i'm lazy and dont feel like going through all 13 pages to find the answer.

so i'll post the question here.

whats is the best mount to use/buy to get some footage from my rear bumper. people continually keep begging me for actual driving footage of my exhaust insted of standing rev's.

got the gopro just dont know which mount is best.

also anyone have suggestions for a external mic setup to capture the sound properly.

any help is greatly appreciated.

Go with the fat Gecko. I use it all the time and it has some serious suction.

http://goo.gl/2Nf0hs

also i found the best placement for exhaust sound is on the back glass at the bottom facing back. the Mic is not over saturated with sound and gives you a good reference to what the exhaust sounds like.

[FPenvy]

Originally Posted by Cbtech

Go with the fat Gecko. I use it all the time and it has some serious suction.

http://goo.gl/2Nf0hs

also i found the best placement for exhaust sound is on the back glass at the bottom facing back. the Mic is not over saturated with sound and gives you a good reference to what the exhaust sounds like.

i'll have to snag one of those.

thanks for the info and the mic location.

[redline10000]

Just thought I would share the carbon fiber mount I made. Not sure if anyone has made one like this or not. I got my idea from looking at another forum DIY headrest camera mount: Build thread / How to.. - page 1 - Random Chat - MK5 Golf GTI

First here are some pics of the mount:

DSC06299.JPG

DSC06297.JPG


I got the various parts needed from home depot, ebay and amazon.

You will need:

1 x Carbon fiber rod : Amazon.com: ARRIS 3K Roll Wrapped 100% Pure Carbon Fiber Tube 23mm*25mm*500mm(2PCS) Glossy Surface: Toys & Games

1x GoPro bar mount:Amazon.com : Oumers Bike Handlebar Mount Motorcycle Seatpost Pole Mount Bicycle Mount Roll Bar Mount with Long Screw for Gopro HD, Hero 4, Hero 3+, Hero3, Hero 2, Hero HD, GoPro Camera accessories : Camera & Photo

2x plastic end caps (I have a bunch of spares PM me if you want some): 8 Pcs Black 25mm Dia Blanking End Caps Covers Tube Insert Bung | eBay

2x small U Bolts

2x Wing nuts

Everything is really easy to make and the only hard part is drilling the holes through the carbon tube so they line up perfectly on both sides. Luckily I found an article that shows how to drill a tube without a drill press. Very good tip since I ruined my first carbon tube. Tech Tips: Drill a Hole in a Pipe Without a Drill Press | Radio magazine

Here is a sample vid that I made with my Virb XE using the mount and an OBDII reader. Hope you guys enjoy.

https://youtu.be/J6Y0H0HEEGc

[Rusty]

My take on the Garmin Virb XE.

Garmin VIRB XE Auto Racing Bundle

[MotoZapien]

Mounted front and center with the suction mount.

https://www.youtube.com/watch?v=QxuZldssGNk&t=3s