ProClip 370Z Mount + Droid Holster review

370Z JT · 03-24-2010, 01:14 PM

@modshack

I prefer that mount high up like how you have it, however I would like to be able to use the center cubby while driving. Looks like your mount is secured by closing the cubby door?

Modshack · 03-24-2010, 01:48 PM

Quote:

Originally Posted by 370Z JT

@modshack

I prefer that mount high up like how you have it, however I would like to be able to use the center cubby while driving. Looks like your mount is secured by closing the cubby door?

...Just pinches it and holds in place nicely..

kenchan · 03-24-2010, 02:06 PM

modshack - kinda ghetto for the usual modshackery?

jetguy · 05-07-2010, 09:10 PM

subscribed

Joka4411 · 05-09-2010, 12:48 AM

Better then in the cubby hole

labk888 · 05-09-2010, 01:02 AM

Nice one, modshack. I like the simplicity.

Darryl79 · 08-22-2012, 07:38 PM

I just ordered the ProClip Angled Mount & Adjustable Holder with Tilt Swivel. About $70 to ship via USPS to HI. Not bad. I am keeping my Iphone 4S in a morphie juice pack. I hope it holds it snug. Thanks to the OP for this info. I hated keeping my phone in my cup holder.

BrianSoCal · 09-21-2012, 03:16 PM

Quote:

Originally Posted by Darryl79

I just ordered the ProClip Angled Mount & Adjustable Holder with Tilt Swivel. About $70 to ship via USPS to HI. Not bad. I am keeping my Iphone 4S in a morphie juice pack. I hope it holds it snug. Thanks to the OP for this info. I hated keeping my phone in my cup holder.

I'd love to see pics when you install it!

w0rM · 08-22-2012, 08:23 PM

I've had a ProClips for years. IMO, it's by far the best way to keep you phone mounted and handy. I love the location for the 370 mount. Being right next to the HU, I can plug my iPhone right into the USB plug to charge it and listen to music.

Zdar · 09-21-2012, 03:30 PM

Quote:

Originally Posted by w0rM

I've had a ProClips for years. IMO, it's by far the best way to keep you phone mounted and handy. I love the location for the 370 mount. Being right next to the HU, I can plug my iPhone right into the USB plug to charge it and listen to music.

I really like the Proclip as well but a piece of the bottom clip broke off either when I was taking it off or putting it on... same with the one that I bought my mom for her Beemer... same location.
I'm going to contact them soon.

choibora · 10-21-2012, 07:43 PM

photo3.jpg

IMG_0539.jpg

IMG_0538.jpg

I have been looking as well for a good system. I have used Steelie's magnet (no issues with reception), but darn thing would not stick to the dash board. I looked and thought about ordering Proclip..until I saw what Modshack did (thank you for the idea).

3M taped Steelie magnetic ball onto old iphone plastic clip. Used heat gun to bend the plastic to fit. I'm going to test this system to see if it will hold. Probably not going to hang the iPad like that, but looks like phone is not an issue. If this doesn't work, probably order Proclip. Thanks guys for another good find!

Menace370Z · 07-12-2013, 11:29 AM

Anyone use the ProClip Mount for a Samsung S4? I was looking at this one online, I have a Spigen SlimArmor case.

Samsung Galaxy S4 Medium Universal Adjustable Holder for devices with a Case*-*ProClip USA

Menace370Z · 07-20-2013, 12:24 AM

Quote:

Originally Posted by m4a1mustang

Like many of you, I was very tired of keeping my phone in my cup holder. Having experience with ProClip mounts, I decided to give their 370Z unit a try. I ordered the passenger side knee pad mount ($29.99) and the Holster with Tilt Swivel & Car Mount Magnet ($34.99) for my Droid.

As with the ProClip mount I used in my last car, I decided not to peel the covers off the 3M adhesive tape so that I could remove it whenever necessary. Don't worry, the mount clips in there very solidly and WILL NOT move around! No tape needed.

Here are the pics:

Don't worry about it being a problem for your passengers... there's still plenty of leg room for them with the mount installed.

Worth the money? Definitely. Solid piece and it's MUCH better having the phone in a fixed position freeing up the cup holder.

My apologies for the dirty interior -- I will be taking care of that during my spring detail.

I just got my ProClip and have a question about how your bottom clip attaches. Mine doesn't fully wrap around the bottom edge of the center console. Instead the ProClip bracket goes about half way around the bottom edge and the U shaped attachment isn't wide enough to fully go around the bottom of the console. It is secure, but I am worried the sharp edge of the ProClip bracket will eventually wear a hole in the center console material. Is this how it is supposed to fit?

370_o · 04-03-2015, 11:42 PM

I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result.

m4a1mustang · 04-05-2015, 11:31 PM

Quote:

Originally Posted by 370_o

I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result.

Nice work!

05-07-2010, 09:10 PM	#4 (permalink)
jetguy Enthusiast Member Join Date: Apr 2010 Location: atlanta Posts: 311 Drives: 370z Rep Power: 16	subscribed subscribed

05-09-2010, 01:02 AM	#6 (permalink)
labk888 Base Member Join Date: Dec 2008 Location: Big D Posts: 233 Drives: '10 370Z PW 6MT T&S Rep Power: 533	Nice one, modshack. I like the simplicity. __________________ LABK 10' 370Z/PW/6MT/Touring Sport/Illum. Kicks/Ventureshield Ultra/F1 Pinnacle 15% Tint/PLX KIWI

08-22-2012, 08:23 PM	#9 (permalink)
w0rM A True Z Fanatic Join Date: May 2012 Location: Houston, TX Posts: 2,198 Drives: 2015 Corvette Z06 Rep Power: 37	I've had a ProClips for years. IMO, it's by far the best way to keep you phone mounted and handy. I love the location for the 370 mount. Being right next to the HU, I can plug my iPhone right into the USB plug to charge it and listen to music. __________________ \| SOLD September 14th, 2013 \| My Build Journal

04-03-2015, 11:42 PM	#14 (permalink)
370_o Base Member Join Date: Jul 2013 Location: Santa Monica, CA Posts: 51 Drives: 2013 370Z Sport M6 Rep Power: 16	ProClip Holder + Custom Mount I was inspired by this thread and thought I'd share my recent project. I liked the ProClip holder but didn't much care for the mounts as they look a bit kluged together in my opinion. I decided to make a custom one and started playing with some fiberglass. Here's the result. m4a1mustang, kenchan, FairladyZ10PG and 4 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket Dash Mounts - ProClip	SoCal 370Z	Exterior & Interior	33	07-15-2014 10:57 PM
Droid	510z	The Lounge (Off Topic)	678	07-01-2011 02:46 PM
Anyone else pick up the new Verizon DROID?	MightyBobo	The Lounge (Off Topic)	56	11-11-2009 12:31 AM
Aftermarket Dash Mount "Xentris Mount"	37009	Audio & Video	1	11-03-2009 03:12 PM
Where to mount amps on 370z enclosure?	flashburn	ZEnclosures	16	10-13-2009 07:37 PM

03-24-2010, 01:14 PM	#1 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	@modshack I prefer that mount high up like how you have it, however I would like to be able to use the center cubby while driving. Looks like your mount is secured by closing the cubby door?

03-24-2010, 02:06 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	modshack - kinda ghetto for the usual modshackery?

05-09-2010, 12:48 AM	#5 (permalink)
Joka4411 Base Member Join Date: May 2010 Location: Baltimore Md Posts: 131 Drives: 40th anniver 370Z Rep Power: 16	Better then in the cubby hole

08-22-2012, 07:38 PM	#7 (permalink)
Darryl79 Base Member Join Date: Jan 2012 Location: Honolulu, HI Posts: 43 Drives: 12-370ZR-BC-7AT Rep Power: 14	I just ordered the ProClip Angled Mount & Adjustable Holder with Tilt Swivel. About $70 to ship via USPS to HI. Not bad. I am keeping my Iphone 4S in a morphie juice pack. I hope it holds it snug. Thanks to the OP for this info. I hated keeping my phone in my cup holder.

10-21-2012, 07:43 PM	#11 (permalink)
choibora Base Member Join Date: Jul 2012 Location: Valencia Posts: 2 Drives: 12 Nissan 370z Bk M6 Rep Power: 14	photo3.jpg IMG_0539.jpg IMG_0538.jpg I have been looking as well for a good system. I have used Steelie's magnet (no issues with reception), but darn thing would not stick to the dash board. I looked and thought about ordering Proclip..until I saw what Modshack did (thank you for the idea). 3M taped Steelie magnetic ball onto old iphone plastic clip. Used heat gun to bend the plastic to fit. I'm going to test this system to see if it will hold. Probably not going to hang the iPad like that, but looks like phone is not an issue. If this doesn't work, probably order Proclip. Thanks guys for another good find!

07-12-2013, 11:29 AM	#12 (permalink)
Menace370Z Base Member Join Date: Aug 2012 Location: Sunnyvale Posts: 24 Drives: '13 370Z MB MT Rep Power: 13	Anyone use the ProClip Mount for a Samsung S4? I was looking at this one online, I have a Spigen SlimArmor case. Samsung Galaxy S4 Medium Universal Adjustable Holder for devices with a Case-ProClip USA