Steering Wheel Spacer

NorthStyle · 06-06-2022, 07:16 PM

Quote:

Originally Posted by Z is 4 ZEBRA!

Great work! Any chance for a how-to?

I found this on amazon, would this be correct?
https://www.amazon.com/Deutsch-8-pin...4549705&sr=8-5

Is this basically just cutting the existing harness, and soldering it to the DTM harness on both ends to get the extra length? Hope my questions make sense, my electrical experience is less than average.

I appreciate you being the guinea pig with this!

I was going to do a How-To but with there already being one for removing the steering wheel/airbag and another few for adding aftermarket wheels/spacers, I didn't see the point. Really, once you have the spacer in hand it only goes one way and the only partially confusing part is making sure you don't mix the washer that comes with the spacer vs the OEM one on the 19mm steering wheel nut.

For the connector, you'd ideally want one that is 20awg or above, probably a 22awg if you can find one. But, yes, beyond that its' just cutting/matching/soldering. Extremely simple so long as you have a set of helping hands (or an extra set of hands).

Z is 4 ZEBRA! · 03-15-2023, 01:24 PM

Finally pulled the trigger on this and so glad I did! I had to extend the harness as well, but that was not too difficult.

Just remember to line up the steering wheel when installing. My first attempt I was a few splines off and the wheel was slightly turned when the car was pointed straight. It does trigger a traction control code if not aligned correctly.

Another thing to note is that the turn signal stalk does not move so now the left hand needs to come off the wheel to reach the stalk. Definitely a weird feeling, but worth the sacrifice.

filip00 · 03-15-2023, 05:59 PM

So how did you solve the harness issue? Got a ready kit from somewhere to order?

Z is 4 ZEBRA! · 03-17-2023, 05:21 PM

I used this to extend the harness.

https://www.amazon.com/dp/B07K74624T...roduct_details

filip00 · 03-18-2023, 07:54 AM

How many pins connector did you need? This one is not in stock currently, just to know what I should look for. Also, if you've got the link to the extender piece too, I'll be thankful

NorthStyle · 03-18-2023, 07:26 PM

Quote:

Originally Posted by filip00

How many pins connector did you need? This one is not in stock currently, just to know what I should look for. Also, if you've got the link to the extender piece too, I'll be thankful

You need the 8-pin and the link to the extension is in the first post.

filip00 · 03-19-2023, 04:36 AM

The link in the first post doesn't work :/

NorthStyle · 03-19-2023, 04:55 AM

I see. After looking through my purchase history, the company is no longer actively selling on eBay. The spacer is still available through their website, but it seems like it is made to order now.

https://www.spacershop.com/en/produc...r-nissan-370z/

filip00 · 03-19-2023, 08:41 AM

Thanks for the help. Any idea if these are the good option? They seem like the same ones as from the original post:
https://www.amazon.com/Connector-Pig...e-d6df97cf3699

NorthStyle · 03-19-2023, 07:03 PM

Truthfully, the type of connector/pigtail that you use doesn't matter so long as it has 8 pins. I used the DTM since it was what my friend had laying around. Just make sure that the pigtail you use is small since space is limited in that area.

03-19-2023, 04:55 AM	#23 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	I see. After looking through my purchase history, the company is no longer actively selling on eBay. The spacer is still available through their website, but it seems like it is made to order now. https://www.spacershop.com/en/produc...r-nissan-370z/ filip00 likes this.

03-19-2023, 07:03 PM	#25 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	Truthfully, the type of connector/pigtail that you use doesn't matter so long as it has 8 pins. I used the DTM since it was what my friend had laying around. Just make sure that the pigtail you use is small since space is limited in that area. filip00 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering wheel pump *whining steering wheel when turning	johncarlopang	Engine & Drivetrain	18	02-26-2017 10:32 AM
Steering wheel spacer?	gozfast	Wheels & Tires	24	11-24-2016 09:47 AM
Steering wheel spacer	PEPI	Exterior & Interior	6	07-13-2014 01:43 AM
spacer install and steering wheel shaking	scottnismo	Wheels & Tires	19	01-20-2012 06:05 PM
Retrofitting nav steering wheel buttons onto non-nav steering wheel?	ghostbusters	Exterior & Interior	2	10-11-2011 11:27 AM

03-15-2023, 01:24 PM	#17 (permalink)
Z is 4 ZEBRA! Base Member Join Date: Jun 2013 Location: SLC Posts: 63 Drives: 40th Nissan 370z Rep Power: 125	Finally pulled the trigger on this and so glad I did! I had to extend the harness as well, but that was not too difficult. Just remember to line up the steering wheel when installing. My first attempt I was a few splines off and the wheel was slightly turned when the car was pointed straight. It does trigger a traction control code if not aligned correctly. Another thing to note is that the turn signal stalk does not move so now the left hand needs to come off the wheel to reach the stalk. Definitely a weird feeling, but worth the sacrifice.

03-15-2023, 05:59 PM	#18 (permalink)
filip00 Enthusiast Member Join Date: May 2021 Location: slovenia Posts: 481 Drives: 370z pack Rep Power: 105292	So how did you solve the harness issue? Got a ready kit from somewhere to order?

03-17-2023, 05:21 PM	#19 (permalink)
Z is 4 ZEBRA! Base Member Join Date: Jun 2013 Location: SLC Posts: 63 Drives: 40th Nissan 370z Rep Power: 125	I used this to extend the harness. https://www.amazon.com/dp/B07K74624T...roduct_details

03-18-2023, 07:54 AM	#20 (permalink)
filip00 Enthusiast Member Join Date: May 2021 Location: slovenia Posts: 481 Drives: 370z pack Rep Power: 105292	How many pins connector did you need? This one is not in stock currently, just to know what I should look for. Also, if you've got the link to the extender piece too, I'll be thankful

03-19-2023, 04:36 AM	#22 (permalink)
filip00 Enthusiast Member Join Date: May 2021 Location: slovenia Posts: 481 Drives: 370z pack Rep Power: 105292	The link in the first post doesn't work :/

03-19-2023, 08:41 AM	#24 (permalink)
filip00 Enthusiast Member Join Date: May 2021 Location: slovenia Posts: 481 Drives: 370z pack Rep Power: 105292	Thanks for the help. Any idea if these are the good option? They seem like the same ones as from the original post: https://www.amazon.com/Connector-Pig...e-d6df97cf3699