Coolerworx Shifter Assembly (Dealers)

ubermoore · 12-10-2020, 10:21 PM

I greased everything up. The insert was really tight, but the bushing had a decent amount of play. It’s too early to tell, but I drove for about 10 miles and did things that would normally cause the rattle, and it’s quiet so far.

redondoaveb · 12-10-2020, 10:31 PM

Quote:

Originally Posted by ubermoore

I greased everything up. The insert was really tight, but the bushing had a decent amount of play. It’s too early to tell, but I drove for about 10 miles and did things that would normally cause the rattle, and it’s quiet so far.

Thanks. Keep the updates coming

redondoaveb · 12-13-2020, 07:06 PM

Just ordered a carbon fiber shifter surround cover for the coolerworx.

BettyZ · 12-13-2020, 10:12 PM

Quote:

Originally Posted by redondoaveb

Just ordered a carbon fiber shifter surround cover for the coolerworx.

I like it; but won't your hairties fall through the slot? I'd def buy it if it had a much smaller boot covering the gap.

madwi · 12-14-2020, 06:43 AM

Quote:

Originally Posted by redondoaveb

Just ordered a carbon fiber shifter surround cover for the coolerworx.

Thats clean, I like it.

edub370 · 12-14-2020, 07:49 AM

soooo back to that rattle... that solved now?

BettyZ · 12-14-2020, 07:53 AM

Sure, why not?

Sent from my SM-G955U using Tapatalk

redondoaveb · 12-14-2020, 09:07 AM

Quote:

Originally Posted by BettyZ

I like it; but won't your hairties fall through the slot? I'd def buy it if it had a much smaller boot covering the gap.

I'm going to take it to my local auto upholstery shop and see if they can fabricate a short (maybe a couple inches high) boot to cover the opening. Maybe make the part around the shifter shaft elastic so it won't slide down

ubermoore · 12-14-2020, 10:06 AM

Thrashed on the car all weekend with no rattle. Before, it was worst when punching revs north of 6K or tooling along in 3rd or 4th gear. Now it’s quiet except for some transmission noise in the high revs which I would consider normal for this shifter, given how it’s mounted.

Should also add that the m-tec shifter springs made a noticeable improvement in feel. Because the lever is so long it always felt sloppy with a heavy shift knob, but now it’s nice and tight, even with a 500g Raceseng.

redondoaveb · 12-14-2020, 10:31 AM

Quote:

Originally Posted by ubermoore

Thrashed on the car all weekend with no rattle. Before, it was worst when punching revs north of 6K or tooling along in 3rd or 4th gear. Now it’s quiet except for some transmission noise in the high revs which I would consider normal for this shifter, given how it’s mounted.

Should also add that the m-tec shifter springs made a noticeable improvement in feel. Because the lever is so long it always felt sloppy with a heavy shift knob, but now it’s nice and tight, even with a 500g Raceseng.

Do you feel comfortable enough that I can get back to coolerworx and tell them it cured the issue?

ubermoore · 12-14-2020, 01:03 PM

Quote:

Originally Posted by redondoaveb

Do you feel comfortable enough that I can get back to coolerworx and tell them it cured the issue?

I’m convinced it’s fixed in my case.

redondoaveb · 12-14-2020, 01:40 PM

Quote:

Originally Posted by ubermoore

I’m convinced it’s fixed in my case.

I'll let coolerworx know. We'll see what they come up with.

DivideByZero · 12-15-2020, 02:56 PM

Quote:

Originally Posted by ubermoore

Thrashed on the car all weekend with no rattle. Before, it was worst when punching revs north of 6K or tooling along in 3rd or 4th gear. Now it’s quiet except for some transmission noise in the high revs which I would consider normal for this shifter, given how it’s mounted.

Should also add that the m-tec shifter springs made a noticeable improvement in feel. Because the lever is so long it always felt sloppy with a heavy shift knob, but now it’s nice and tight, even with a 500g Raceseng.

Curious about the shifter springs. I have a raceseng knob I was intending to use with this shifter too.

trangalang · 12-22-2020, 02:47 PM

Quote:

Originally Posted by ubermoore

I’m convinced it’s fixed in my case.

Can you clarify which part you had to grease?

I bought this shifter last year but ended up selling it since the rattle was driving me crazy while I was DD'ing my Z. Currently running a Torque Solutions short shifter with an extension and overall feels like crap compared to how the Coolerworx felt.

Thinking back, I recall greasing the bolt to connect the shifter to the linkage but maybe the rattling could be caused by the lateral play from the insert hitting the linkage when installed? Forgot now snug the insert was.

I will buy this damn thing for a second time if someone found a solution for the rattling

redondoaveb · 12-22-2020, 03:53 PM

Quote:

Originally Posted by trangalang

Can you clarify which part you had to grease?

I bought this shifter last year but ended up selling it since the rattle was driving me crazy while I was DD'ing my Z. Currently running a Torque Solutions short shifter with an extension and overall feels like crap compared to how the Coolerworx felt.

Thinking back, I recall greasing the bolt to connect the shifter to the linkage but maybe the rattling could be caused by the lateral play from the insert hitting the linkage when installed? Forgot now snug the insert was.

I will buy this damn thing for a second time if someone found a solution for the rattling

Look at post #137. Also, Coolerworx contacted me this morning and they will be redesigning the insert and let me know when they're available.

12-10-2020, 10:21 PM	#166 (permalink)
ubermoore Base Member Join Date: Jan 2020 Location: Floriduh Posts: 35 Drives: 16 370Z M6 Rep Power: 6715	I greased everything up. The insert was really tight, but the bushing had a decent amount of play. It’s too early to tell, but I drove for about 10 miles and did things that would normally cause the rattle, and it’s quiet so far. JARblue, Hotrodz, madwi and 2 others like this.

12-14-2020, 07:49 AM	#171 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	soooo back to that rattle... that solved now? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

12-14-2020, 07:53 AM	#172 (permalink)
BettyZ A True Z Fanatic Join Date: Aug 2018 Location: Chicagoland Age: 37 Posts: 5,261 Drives: A Garage Queen Rep Power: 2684370	Sure, why not? Sent from my SM-G955U using Tapatalk __________________ '14 MB Nismo \| Boost Lab 6870 1.32 AR 553 HP / 471 ft.-lbs. Betty Mods

12-14-2020, 10:06 AM	#174 (permalink)
ubermoore Base Member Join Date: Jan 2020 Location: Floriduh Posts: 35 Drives: 16 370Z M6 Rep Power: 6715	Thrashed on the car all weekend with no rattle. Before, it was worst when punching revs north of 6K or tooling along in 3rd or 4th gear. Now it’s quiet except for some transmission noise in the high revs which I would consider normal for this shifter, given how it’s mounted. Should also add that the m-tec shifter springs made a noticeable improvement in feel. Because the lever is so long it always felt sloppy with a heavy shift knob, but now it’s nice and tight, even with a 500g Raceseng. Hotrodz, madwi, ZontheRocks and 2 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Coolerworx shifter	redondoaveb	Engine & Drivetrain	97	05-19-2020 03:24 PM
Aftermarket 370Z shifter handle and shifter knobs for automatic transmissions	Quicksilvers	Exterior & Interior	17	03-25-2018 09:48 AM
What is the best short-throw shifter and shifter knob combo?	ZInferno0248	Nissan 370Z General Discussions	79	03-06-2017 06:57 AM
[WTB] Factory Shifter Assembly or just the white snap on mount bushing	theZspot	Parts for sale (Private Classifieds)	0	01-29-2015 12:44 AM
[WTB] Stock Shifter assembly.	rinaudo	Parts for sale (Private Classifieds)	1	08-03-2012 03:03 AM