What about wraps

Lvcky69 · 03-14-2018, 08:41 PM

rainman1ne · 03-14-2018, 10:16 PM

20180205_125445.jpg

scope22 · 03-15-2018, 11:38 AM

that marble looks insane, do you have more pics? outside in the sun?

scope22 · 03-15-2018, 11:40 AM

Sure, dont think its nearly 100hrs, about 2-4hrs per panel, 40hrs max that is for someone like me with no experiance. Also i can't imagine $1800 in material cost unless you're doing a bus.

Quote:

Originally Posted by Baronsmokes

If you have wraped your car post more pics of before and after.I might try this in future.Painting car now.$1800 in material costs plus 100hrs of my time.

Tractionless · 03-15-2018, 04:21 PM

I have a wrapped boat and the roof of my Z is wrapped.

If you do a printed wrap you need the UV overlay or it will toast. I can scratch it with a fingernail. IMO rocks will chew it up on a car, but you can replace sections when said damage occurs. Said chips will eventually collect dirt and it will show just liked it a torn sticker. You don't need to wax the wrap, wash with the same products as a car. Don't take through a car wash. Make sure your edges are either permanently taped down or the wrap is secured with 3M edge lock.

Lvcky69 · 03-15-2018, 04:45 PM

Quote:

Originally Posted by scope22

that marble looks insane, do you have more pics? outside in the sun?

check his instagram . (It is on the window)

OptionZero · 03-15-2018, 06:40 PM

Quote:

Originally Posted by Tractionless

I have a wrapped boat and the roof of my Z is wrapped.

If you do a printed wrap you need the UV overlay or it will toast. I can scratch it with a fingernail. IMO rocks will chew it up on a car, but you can replace sections when said damage occurs. Said chips will eventually collect dirt and it will show just liked it a torn sticker. You don't need to wax the wrap, wash with the same products as a car. Don't take through a car wash. Make sure your edges are either permanently taped down or the wrap is secured with 3M edge lock.

My local shop has done a coating over the wrap before, for max protection. Seems like a good idea if you're gonna go that route

Baronsmokes · 03-15-2018, 07:35 PM

Quote:

Originally Posted by scope22

Sure, dont think its nearly 100hrs, about 2-4hrs per panel, 40hrs max that is for someone like me with no experiance. Also i can't imagine $1800 in material cost unless you're doing a bus.

I have painted a lot of cars.
If you are fitting aftermarket fenders and bumpers extra work involved.Use the best Primer, paint,clear,activator.Need to get body flat and perfect.Better than factory.Prime and block sand.The body prep is 80% of the job..Several coats of paint to lay down.I will put 3 coats of high soild clear on top of that.Then I will sand and buff the clear to get a glass finish. I do not mean to be rude but to get the finish I like is a lot of work.Easy100hrs.

scope22 · 03-15-2018, 08:47 PM

Sorry, i misunderstood...i didn't realize you were talking about painting

Quote:

Originally Posted by Baronsmokes

I have painted a lot of cars.
If you are fitting aftermarket fenders and bumpers extra work involved.Use the best Primer, paint,clear,activator.Need to get body flat and perfect.Better than factory.Prime and block sand.The body prep is 80% of the job..Several coats of paint to lay down.I will put 3 coats of high soild clear on top of that.Then I will sand and buff the clear to get a glass finish. I do not mean to be rude but to get the finish I like is a lot of work.Easy100hrs.

Baronsmokes · 03-15-2018, 08:52 PM

Quote:

Originally Posted by scope22

Sorry, i misunderstood...i didn't realize you were talking about painting

My fault too.Would agree with your time for wraps.I may do this in future.You can do some crazy stuff with wraps and change it when you want.

03-14-2018, 08:41 PM	#16 (permalink)
Lvcky69 Enthusiast Member Join Date: Jun 2017 Location: Miami Posts: 385 Drives: 17 370z & 16 911 S Rep Power: 3921	scope22 and Baronsmokes like this.

03-15-2018, 04:21 PM	#20 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,261 Drives: '10 K23 ST 7AT Rep Power: 30525	I have a wrapped boat and the roof of my Z is wrapped. If you do a printed wrap you need the UV overlay or it will toast. I can scratch it with a fingernail. IMO rocks will chew it up on a car, but you can replace sections when said damage occurs. Said chips will eventually collect dirt and it will show just liked it a torn sticker. You don't need to wax the wrap, wash with the same products as a car. Don't take through a car wash. Make sure your edges are either permanently taped down or the wrap is secured with 3M edge lock. __________________ Toys Not Tots

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window Tint & Wraps	370Ztune	Body Interior/Exterior	1	12-30-2015 12:42 PM
Opinion on Wraps Vs. New Paint	Proposed	Exterior & Interior	12	12-09-2015 06:49 PM
Filter Wraps for Gen 3	diablokev87	Intake/Exhaust	1	10-06-2010 07:32 PM
Vinyl wraps	Calvin	Exterior & Interior	4	05-23-2010 06:06 PM

03-15-2018, 11:38 AM	#18 (permalink)
scope22 A True Z Fanatic Join Date: Apr 2012 Location: Roswell, GA Posts: 1,179 Drives: wife crazy Rep Power: 55	that marble looks insane, do you have more pics? outside in the sun?