Swaping out seats question ( juke )

2011 Nismo#91

There is a connection to the passenger side seat belt clip, this is how the car knows if the passenger is belted in. The passenger side seat belt clip should be wired just like it was prior to the install. The bypass needs to be connected to the harness where the original seat's weight sensor was plugged in.

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

OTW Z-Boy

Yep seat belt and bypass on the passenger side are connected. Drivers side only seat belt is connected.


Sent from my iPhone using Tapatalk

__________________
2014: Nismo 370z #495 Magnetic Black - Stillen Gen3 CAI | SPL F/R Camber Arms | HKS Hypermax IV | JDM Rear Fog Light |GT-R Push Start Button | Z1 2 Piece D/S | Illuminated Kicks | Tommykaira | Work VS-XX BKB Step Lip +23/+13 19" 9.5/11 | Fast Intentions RHFC TDX CBE 12" CF | EcuTek

2011 Nismo#91

Then all you should need is a reset if everything is working as it should.

__________________
GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs