Vented Hood Inserts Intrest

Jayhovah · 11-09-2017, 08:33 PM

Here's a little DIY log of a guy installing trackspec vents in his camaro. Came with templates. Looks pretty easy if you take your time.

https://www.autoxandtrack.com/tracks...uvers-install/

Rusty · 11-09-2017, 08:47 PM

Quote:

Originally Posted by Jayhovah

Here's a little DIY log of a guy installing trackspec vents in his camaro. Came with templates. Looks pretty easy if you take your time.

https://www.autoxandtrack.com/tracks...uvers-install/

That first cut is always the hardest!

After that, you don't care.

fryzia23 · 11-09-2017, 08:59 PM

Vents looking very good! Please add me to the list. Need to stay busy over the winter break.

wideglideleon · 11-09-2017, 09:20 PM

I'm in for sides add me to the list!
All three looks to much for my tastes.

Jayhovah · 11-09-2017, 09:35 PM

Quote:

Originally Posted by wideglideleon

I'm in for sides add me to the list!
All three looks to much for my tastes.

I'm hoping when Eagle posts the installed pics cooltoy will shop the "just sides" and "just middle" versions.

Rusty · 11-09-2017, 09:43 PM

1. Chuck33079
2. Jayhovah
3. Rusty
4. Canolinumber1
5. rainman1ne, sides only
6. Quincy Burk
7. JARblue
8. Krylon
9. OhioYJ
10. Chad Mitram
11. Bimbimbop
12. ihiryu
13. Astro932
14. Madwi
15. fmayi1101
16. Spooler
17. redondoaveb
18. AlWakRa
19. fryzia23
20. wideglideleon, sides only
21.
22.
23.
24.
25.

cooltoy · 11-09-2017, 10:16 PM

Quote:

Originally Posted by Jayhovah

I'm hoping when Eagle posts the installed pics cooltoy will shop the "just sides" and "just middle" versions.

Me too.

( Click to show/hide )

Eagle · 11-09-2017, 10:33 PM

Quote:

Originally Posted by cooltoy

Me too.

( Click to show/hide )

lol...tomorrow morning I'll take some pics in the light

Sent from my SM-G930P using Tapatalk

OhioYJ · 11-10-2017, 05:12 AM

Quote:

Originally Posted by Eagle

lol...tomorrow morning I'll take some pics in the light

How about of a better picture of how much structure is still left under the hood too? The lighting makes it hard to see. It looks like quite a bit of the structure remains intact actually.

*edit* Not that it's going to change my decision. I'm just trying to decide if some other bracing is necessary.

Eagle · 11-09-2017, 09:44 PM

Installed!

Sent from my SM-G930P using Tapatalk

Rusty · 11-09-2017, 09:47 PM

with the hood shut and looking through the vents to see where the motor and stuff is?

May have to use a light to see in there.

Spooler · 11-09-2017, 09:49 PM

What are the vents made out of? I can't find it in the thread.

Rusty · 11-09-2017, 10:15 PM

Quote:

Originally Posted by Spooler

What are the vents made out of? I can't find it in the thread.

unobtainium carbon fiber.

fmayi1101 · 11-09-2017, 10:07 PM

Looking forward to pic on your z eagle, and plus on the rain gaurds if possible I live in fl also.

Sent from my iPhone using Tapatalk

cooltoy · 11-09-2017, 10:14 PM

For those that just want this for looks only, is there a way to install them without cutting all the sub-frame structure?

11-09-2017, 09:43 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,558 Drives: 2011 Nismo GM 6M Rep Power: 2684439	1. Chuck33079 2. Jayhovah 3. Rusty 4. Canolinumber1 5. rainman1ne, sides only 6. Quincy Burk 7. JARblue 8. Krylon 9. OhioYJ 10. Chad Mitram 11. Bimbimbop 12. ihiryu 13. Astro932 14. Madwi 15. fmayi1101 16. Spooler 17. redondoaveb 18. AlWakRa 19. fryzia23 20. wideglideleon, sides only 21. 22. 23. 24. 25. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-09-2017, 09:44 PM	#10 (permalink)
Eagle Track Member Join Date: Jan 2011 Location: South Orange County, CA Posts: 904 Drives: 2011 370z Red 6MT Rep Power: 10657	Installed! Sent from my SM-G930P using Tapatalk __________________ nismo\| EVO-R High Wing \| *Stillen* Gen 3 CAI \| SEIBON TS Hood \| Z1 34 Row Oil Cooler \| VMR 810 Wheels \| Endless MX72 Pads \|*Sabelt* GT-140 Seat \|Fly1Motorsports RS1 Fenders \| Hotchkis Front Sway Bar \| Berk HFC \|

11-09-2017, 09:47 PM	#11 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,558 Drives: 2011 Nismo GM 6M Rep Power: 2684439	with the hood shut and looking through the vents to see where the motor and stuff is? May have to use a light to see in there. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-09-2017, 10:14 PM	#15 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,006 Drives: 14 PW 370Z S/T MT Rep Power: 243724	For those that just want this for looks only, is there a way to install them without cutting all the sub-frame structure? __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-09-2017, 08:59 PM	#3 (permalink)
fryzia23 Enthusiast Member Join Date: Dec 2010 Location: new jersey Posts: 452 Drives: 2011 MB 370Z NISMO Rep Power: 1246	Vents looking very good! Please add me to the list. Need to stay busy over the winter break.

11-09-2017, 09:20 PM	#4 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64086	I'm in for sides add me to the list! All three looks to much for my tastes.

11-09-2017, 09:49 PM	#12 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 14,149 Drives: 2013 Nismo 370z Rep Power: 2684394	What are the vents made out of? I can't find it in the thread.

11-09-2017, 10:07 PM	#14 (permalink)
fmayi1101 Base Member Join Date: Jul 2011 Location: Florida Posts: 68 Drives: 2010 NISMO 370Z Rep Power: 15	Looking forward to pic on your z eagle, and plus on the rain gaurds if possible I live in fl also. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] CarbonSignal hood inserts	edzilla123	Parts for sale (Private Classifieds)	0	04-28-2017 09:00 AM
Vented Fender inserts	docabramson	Exterior & Interior	2	09-01-2015 02:35 AM
CarbonSignal V1 hood inserts	A.J@CarbonSignal	Body Interior/Exterior	48	07-13-2014 12:04 AM
[WTB] vented hood	SCORPION	Parts for sale (Private Classifieds)	0	02-10-2014 09:32 PM