EVO-R Nismo front bumper air ducts

EVOR · 08-09-2013, 11:37 AM

Just had these made for my Nismo. On the passenger side, had the remove factory windshield fluid tank, replaced with a smaller one. Allow more room for the intake hose.

Rusty · 08-09-2013, 03:10 PM

What size hose you're using?

Amuse370z · 08-09-2013, 08:31 PM

I bought an EVO-R foglight, but when I received it, the glue on the top left corner was applied too thick and seeped down, it is very noticeable up close, is there anything you can do for me?

Thanks in advance.

synolimit · 08-09-2013, 10:17 PM

Black screws.

Looks like the NACA ducts. What's the longest section end to end? I don't think they'll fit my 13 because of the LEDs.

EVOR · 08-10-2013, 03:31 AM

Quote:

Originally Posted by Amuse370z

I bought an EVO-R foglight, but when I received it, the glue on the top left corner was applied too thick and seeped down, it is very noticeable up close, is there anything you can do for me?

Thanks in advance.

PM me you shipping info. I'll sent you another. Let me know smoke or red.

EVOR · 08-10-2013, 03:32 AM

These will fit Nismo only. Working on for stock.

EVOR · 08-10-2013, 03:33 AM

These are custom shapped to fit Nismo bumper only.

takjak2 · 08-10-2013, 03:28 PM

I am just using cheap NACA ducts. Heat gun and some rivets make it fit just fine. Wrapped in pho-carbon. No need to custom.

takjak2 · 08-10-2013, 03:29 PM

For rusty: 3 inch, reduced to 2 for the Stillen shields.

simota1 · 08-10-2013, 05:13 PM

looking good jay

Baer383 · 08-10-2013, 05:42 PM

Quote:

Originally Posted by simota1

looking good jay

simota1 · 08-10-2013, 06:09 PM

Quote:

Originally Posted by Baer383

noo???

Wonka2581 · 08-10-2013, 06:13 PM

Damn that looks good...

Baer383 · 08-10-2013, 06:17 PM

Quote:

Originally Posted by simota1

noo???

( Click to show/hide )

COSMO · 08-10-2013, 09:00 PM

I have seen those off of Summit's website. Will see if I can find a link but they are very inexpensive...

08-09-2013, 11:37 AM	#1 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	EVO-R Nismo front bumper air ducts Just had these made for my Nismo. On the passenger side, had the remove factory windshield fluid tank, replaced with a smaller one. Allow more room for the intake hose. CarbonSignal and carlitos_370z like this. __________________ WWW.EVO-R.NET

08-09-2013, 03:10 PM	#2 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,892 Drives: 2011 Nismo GM 6M Rep Power: 2684436	What size hose you're using? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-09-2013, 08:31 PM	#3 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 16	I bought an EVO-R foglight, but when I received it, the glue on the top left corner was applied too thick and seeped down, it is very noticeable up close, is there anything you can do for me? Thanks in advance. Last edited by Amuse370z; 08-09-2013 at 08:34 PM.

08-09-2013, 10:17 PM	#4 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Black screws. Looks like the NACA ducts. What's the longest section end to end? I don't think they'll fit my 13 because of the LEDs. __________________ 13 370z-

08-10-2013, 03:32 AM	#6 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	These will fit Nismo only. Working on for stock. Wonka2581 likes this. __________________ WWW.EVO-R.NET

08-10-2013, 03:33 AM	#7 (permalink)
EVOR A True Z Fanatic Join Date: Sep 2009 Location: New York Posts: 1,647 Drives: 09 Nismo 370Z #80 Rep Power: 44	These are custom shapped to fit Nismo bumper only. __________________ WWW.EVO-R.NET

08-10-2013, 03:28 PM	#8 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	I am just using cheap NACA ducts. Heat gun and some rivets make it fit just fine. Wrapped in pho-carbon. No need to custom. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

08-10-2013, 03:29 PM	#9 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	For rusty: 3 inch, reduced to 2 for the Stillen shields. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

08-10-2013, 05:13 PM	#10 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	looking good jay __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

08-10-2013, 06:13 PM	#13 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	Damn that looks good... __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

08-10-2013, 09:00 PM	#15 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 19	I have seen those off of Summit's website. Will see if I can find a link but they are very inexpensive...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] OEM front bumper (non-Nismo)	RN SHARK	Parts for sale (Private Classifieds)	4	05-11-2013 11:42 PM
Nismo Front bumper...	sinceday1	Canada	10	01-02-2013 02:22 PM
[WTB] Nismo front bumper/rear bumper	martin82	Parts for sale (Private Classifieds)	6	12-12-2012 06:58 PM
Nismo front bumper help	mickey	DIY Section (Do-It-Yourself)	5	02-23-2012 11:27 AM
FS:Stock Parts Black~Hood,Sideskirts,Front Bumper,Rear Bumper,Nismo Spoiler,Intakes	Tango	Parts for sale (Private Classifieds)	19	10-04-2010 08:25 PM