Rocket bunny we have been neglected !!!

OptionZero · 05-07-2016, 08:15 PM

That's execution, which always matters

James10694 · 05-07-2016, 11:11 PM

Quote:

Originally Posted by Wiggins3377

And I'm not arguing your taste in mods or anyone else's. Bolt on kits aren't for everyone, I know that and don't discredit those who hate them, but when someone says an overfender that's adds 2-3" per side is not a "widebody" they are by definition wrong.

Sent from my iPhone using Tapatalk

Not sure which definition you looked up, but imo a widebody should flow all the way from the front bumper to the fenders to the skirts to the rear bumper. Not just the bolt on fender flares. Now I agree 100% some of the kits look good and some don't flow with the natural lines of the car. I'm sure a lot of people will disagree with me, but to call bolt on flares "widebody" is rediculous to me. But, to each their own I suppose.

Zerafian · 05-08-2016, 11:41 AM

Iv just never been a fan of seeing people drill holes in the body of the car. I wont lie, some of them can look quite nice but for some reason I feel like rocket bunny isnt really the direction to go with a widebody kit.

Getting a pre fabed widebody is far safer a choice then getting your fenders cut, pulled, welded and custom made. Your relying on a shop to do proper, top tier body work. Hard pill to swallow when I actually got it done that way on my 350z back in 09'

Quote:

Originally Posted by Rusty

I have nothing against bolt-on flairs if done right. Most of the stuff today looks like over-kill.

kinda this

James10694 · 05-08-2016, 08:15 PM

There's one guy who had that done on his rear fenders. Looked really wide and almost stock. Not sure if he's on here it was a red sport

Zerafian · 05-08-2016, 09:28 PM

Quote:

Originally Posted by James10694

There's one guy who had that done on his rear fenders. Looked really wide and almost stock. Not sure if he's on here it was a red sport

yeah, it turned out horribly...and I believe the owner put it up for sale very soon after it was done. Poorly executed and a definite example of what NOT to do.

Aviator44 · 05-09-2016, 08:15 AM

Quote:

Originally Posted by Wiggins3377

This is exactly what I was saying.

So by your logic, every lifted truck with bolt on fender flares is a wide body?

madeinjapan · 05-09-2016, 08:54 AM

Quote:

Originally Posted by Mitco39

i would daily this car to death

Wiggins3377 · 05-09-2016, 10:13 AM

Quote:

Originally Posted by Aviator44

So by your logic, every lifted truck with bolt on fender flares is a wide body?

By definition... Yes. The profile of the car is in fact wider than OEM.

TerribleONE · 05-09-2016, 10:41 AM

Quote:

Originally Posted by Zerafian

yeah, it turned out horribly...and I believe the owner put it up for sale very soon after it was done. Poorly executed and a definite example of what NOT to do.

I thought the work done to extend the fenders out themselves was pretty nice, the rest of the car... not so much.

FPenvy · 05-09-2016, 10:47 AM

Quote:

Originally Posted by TerribleONE

I thought the work done to extend the fenders out themselves was pretty nice, the rest of the car... not so much.

what like the tires not fitting?

TerribleONE · 05-09-2016, 11:19 AM

Quote:

Originally Posted by FPenvy

what like the tires not fitting?

Herra flush y0

FPenvy · 05-09-2016, 11:20 AM

Quote:

Originally Posted by TerribleONE

Herra flush y0

herra fuckin stupid you mean

CarbonSignal · 05-12-2016, 10:50 PM

Doing these for few years my take is if something is made for the car rather then aligning the car to the parts as some wide body execution, it looks better. We have installed Moonbeam kits full and partial and most of the time it's the full kit which has side blades, lip, diffuser and other parts for widebody looks better, that's what rocket bunny does on most cars looks better as they ask you to change it all. Seen few Nissan/Infiniti with just flares slapped and unfortunately nothing flows and car started looking uglier

If not wrong we have the smallest size rear fenders, although 3" wide but found them the most difficult part to be made keeping body lines in tact

Sent from my iPhone using Tapatalk

Anthony@Royal · 05-13-2016, 12:40 PM

Quote:

Originally Posted by CarbonSignal

Seen few Nissan/Infiniti with just flares slapped and unfortunately nothing flows and car started looking uglier

You can't half *** the build. Like big wings with stock aero

Wiggins3377 · 05-13-2016, 12:44 PM

Unfortunately it's execution like this that ruins it for those of us who do a bolt on overfender correctly and spend the time and money to make them look, fit and flow right...

.

05-08-2016, 08:15 PM	#64 (permalink)
James10694 Track Member Join Date: Oct 2013 Location: Las Vegas NV Posts: 913 Drives: 2010 370z Nismo Rep Power: 12	There's one guy who had that done on his rear fenders. Looked really wide and almost stock. Not sure if he's on here it was a red sport __________________ Boosted Performance Single Turbo 618whp/489 tq

05-12-2016, 10:50 PM	#73 (permalink)
CarbonSignal A True Z Fanatic Join Date: Jan 2011 Location: Dubai/California Posts: 2,092 Drives: 370z Rep Power: 20	Rocket bunny we have been neglected !!! Doing these for few years my take is if something is made for the car rather then aligning the car to the parts as some wide body execution, it looks better. We have installed Moonbeam kits full and partial and most of the time it's the full kit which has side blades, lip, diffuser and other parts for widebody looks better, that's what rocket bunny does on most cars looks better as they ask you to change it all. Seen few Nissan/Infiniti with just flares slapped and unfortunately nothing flows and car started looking uglier If not wrong we have the smallest size rear fenders, although 3" wide but found them the most difficult part to be made keeping body lines in tact Sent from my iPhone using Tapatalk 370Z JT, Wiggins3377, carlitos_370z and 1 others like this. __________________ CS 2018 Summer Nismo NEW GB............MOONBEAM Forum OFFER.....................09-14 CS Nismolipkit Forum OFFER Facebook.... Instagram ....Website Last edited by CarbonSignal; 05-13-2016 at 03:56 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bad Bunny	TheBoomSpoon	Movies / Celebrity Gossip / Entertainment / Music	0	05-10-2014 12:04 AM
Rocket Bunny TRA Kyoto Scion FR-S - Stancenation Feature!	rodizzle	Other Vehicles	10	12-26-2012 04:56 PM
Not a happy bunny	irishboy	Australia/New Zealand	28	07-28-2009 08:38 AM

05-07-2016, 08:15 PM	#61 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,160 Drives: 15 370Z Nismo 6MT Rep Power: 203226	That's execution, which always matters