![]() |
the groove in the sensor looks thinner than the teeth on that flywheel damage could have been from your oem one before you switched and it just finally gave out.
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#11 (permalink) |
|
A True Z Fanatic
Join Date: Aug 2009
Location: In the D
Posts: 3,733
Drives: v8 74 260z ;)
Rep Power: 7253 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
the groove in the sensor looks thinner than the teeth on that flywheel damage could have been from your oem one before you switched and it just finally gave out. just in case check the teeth on the flywheel for wear marks maybe one of the teeth has a burr on it. you might be able to see through the crank sensor hole or the inspection window on the bottom of the trans. otherwise take the old sensor and put a couple layers o tape on the tip and shove it back in, then turn the engine over take it out and see if your tape is still in one piece.
__________________
ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 370z wont start no power . Where to start | acracing118 | Exterior & Interior | 6 | 01-05-2013 07:37 PM |
| Car will start sometimes and not start, need advice | aragona7 | Nissan 370Z General Discussions | 11 | 03-08-2012 11:23 PM |
| If you had to start all over.... | saiko71 | Forced Induction | 31 | 03-27-2011 09:56 PM |
| cold start/push start | chops | Nissan 370Z General Discussions | 21 | 02-14-2011 04:40 AM |
| HELP: Car won't start! | tjlazer | Engine & Drivetrain | 41 | 04-06-2010 03:21 PM |