NST (NonStopTuning) 370Z VQ37HR Pulley Kit Review w/ Dyno Charts

efuseakay · 08-02-2011, 11:38 PM

Quote:

Originally Posted by XwChriswX

I have the pulleys in hand, just waiting for the belt to arrive that was backordered. I'm hoping to get it installed by the end of the month if the belt comes in time.

Local auto store should have Gates belts... I forgot the exact size/part #, but I know O'Reilly normally stocks it.

quicksilver08 · 08-05-2011, 03:55 PM

Just order the crank and alternator pulley. I'll let yall know how the install and what not goes. Hoping to have it done before my gears next week. Any suggestions on how to remove the crank pulley? Heard it can be a b****.

wstar · 08-05-2011, 05:11 PM

Removing the crank pulley is not very easy. I don't recommend even trying by yourself in your home garage, unless you've got friends to help and/or the right tools. The best tool for locking the flywheel in place would be to order the one that Nissan lists in their service manual, but you can get by with a second person and a prybar or large screwdriver to hold the back. Get the biggest longest breaker bar setup you can for loosening the front pulley nut.

First paragraph from my stillen pulley install here might prove useful: wstar's Journal

XwChriswX · 08-05-2011, 05:21 PM

Quote:

Originally Posted by efuseakay

Local auto store should have Gates belts... I forgot the exact size/part #, but I know O'Reilly normally stocks it.

If worst come to worse I can do this, but I already ordered it, and there's no rush so I'm not worried for a delay in a backorder. Just wondering if it was in stock or not cause I moved last weekend so I had a new address to ship to.

quicksilver08 · 08-05-2011, 06:46 PM

Why can't I just throw the car in 6th gear and set the e-brake? That bolt can't be on tight enough to turn that kinda mass.

christian370z · 08-05-2011, 10:10 PM

I'm considering getting a set of NST pulleys next spring, I would like the engine to be a bit more responsive when revving both for rev matching and just revving in general. How much is a ballpark figure for installation for those who have had a shop install their pulleys?

birdmanx1 · 08-06-2011, 06:37 AM

Christian, I've had mine done for $150. There were absolutely no issues with the install.

CFZ · 08-09-2011, 12:34 PM

So with this pulley kit the water pump would slow down correct? is there any heating issue with these pumps. i dont know if its covered but Im not willing to read 30 pages to figure it out.

Thanks!

ChipsWithDips · 08-09-2011, 05:46 PM

Quote:

Originally Posted by CFZ

So with this pulley kit the water pump would slow down correct? is there any heating issue with these pumps. i dont know if its covered but Im not willing to read 30 pages to figure it out.

Thanks!

No the coolant pump and oil pump are controlled by the timing chain, which is separate from the belt/crank pulley.

The pulley belt runs the alternator, A/C, and power steering.

370Z JT · 08-11-2011, 05:10 PM

For those with this mod, any increase in engine noise over time? I'm talking those who have had them for atleast 6 months.

XwChriswX · 08-11-2011, 06:27 PM

Kind of odd that we can get picture updates in the other thread, but can't get a response on here or from PMs...

NST Still waiting on that belt, or at least a good word on when they'll be in stock/shipping...

For those of you with these installed already, did you use the Gates K070786 Belt that comes from NST, or did you use the OEM one already on the car, and if you didn't use either of those, and got your own, What belt did you get and from Where??

birdmanx1 · 08-11-2011, 08:21 PM

Quote:

Originally Posted by XwChriswX

For those of you with these installed already, did you use the Gates K070786 Belt that comes from NST, or did you use the OEM one already on the car, and if you didn't use either of those, and got your own, What belt did you get and from Where??

I hope you eventually get the belt. I used the belt provided by NST for my pulleys. You can use the OEM belt but it won't fit the same as the NST belt. It was covered way early in this thread and that's why NST started providing the kit with the belt.

Here is what the package looked like for me, it came with M&M
NST Pulleys + Belt Kit

XwChriswX · 08-11-2011, 08:24 PM

Quote:

Originally Posted by birdmanx1

I hope you eventually get the belt. I used the belt provided by NST for my pulleys. You can use the OEM belt but it won't fit the same as the NST belt. It was covered way early in this thread and that's why NST started providing the kit with the belt.

Here is what the package looked like for me, it came with M&M
NST Pulleys + Belt Kit

Yeah, mine did too lol It was cool even though I don't eat them. I was notified on my invoice that they were out of stock, and would be back in stock by end of July. Well it's almost mid august now and still no word from them on if they're in stock (Even though the website said they were when I ordered, and still does say in stock) And I'm trying to be patient with them, but I really don't like having the parts sitting here wanting to install them, with no belt. And I'm almost about to just go to autozone and get one, but I want to make sure I get the right one since obviously the OEM one they'll have listed isn't right...

quicksilver08 · 08-11-2011, 08:28 PM

I ordered my pulley's friday and got them wednesday. I didn't order the belt though. Gonna go pick it up from o'reilly's tomorrow. And the m&m's were freaking sweet. Thanks!

XwChriswX · 08-11-2011, 08:29 PM

Quote:

Originally Posted by quicksilver08

I ordered my pulley's friday and got them wednesday. I didn't order the belt though. Gonna go pick it up from o'reilly's tomorrow. And the m&m's were freaking sweet. Thanks!

Yeah, the pulleys arrived super fast.

Which belt are you getting, there's an O'reilly's up the street I can go to..

08-05-2011, 03:55 PM	#407 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 13	Just order the crank and alternator pulley. I'll let yall know how the install and what not goes. Hoping to have it done before my gears next week. Any suggestions on how to remove the crank pulley? Heard it can be a b****. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

08-05-2011, 05:11 PM	#408 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	Removing the crank pulley is not very easy. I don't recommend even trying by yourself in your home garage, unless you've got friends to help and/or the right tools. The best tool for locking the flywheel in place would be to order the one that Nissan lists in their service manual, but you can get by with a second person and a prybar or large screwdriver to hold the back. Get the biggest longest breaker bar setup you can for loosening the front pulley nut. First paragraph from my stillen pulley install here might prove useful: wstar's Journal __________________ 7AT Track Car! Journal thread / Car setup details

08-05-2011, 06:46 PM	#410 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 13	Why can't I just throw the car in 6th gear and set the e-brake? That bolt can't be on tight enough to turn that kinda mass. __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys Last edited by quicksilver08; 08-05-2011 at 06:48 PM.

08-05-2011, 10:10 PM	#411 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 431	I'm considering getting a set of NST pulleys next spring, I would like the engine to be a bit more responsive when revving both for rev matching and just revving in general. How much is a ballpark figure for installation for those who have had a shop install their pulleys? __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

08-06-2011, 06:37 AM	#412 (permalink)
birdmanx1 A True Z Fanatic Join Date: Jun 2010 Location: Baltimore, MD Age: 95 Posts: 3,175 Drives: 370z Nismo Rep Power: 23	Christian, I've had mine done for $150. There were absolutely no issues with the install. __________________ 370Z NISMO #0462 \| ClearBra \| 3M tint \| Head/Taillights \| Dynamat \| Black Roof \| Tommy Kaira HB \| CF Parts \| Berk HFCs \| FI SS \| NST Pulleys \| Takeda aFe \| K&N \| H&R Spacers \| Swift Spec R \| SPC F&R \| Zuperman M370 Nismo Vid \| Nismo Journal \| Nismo Rumble

08-09-2011, 12:34 PM	#413 (permalink)
CFZ Base Member Join Date: Jul 2010 Location: F-Town Posts: 134 Drives: 2010 370Z Rep Power: 233	So with this pulley kit the water pump would slow down correct? is there any heating issue with these pumps. i dont know if its covered but Im not willing to read 30 pages to figure it out. Thanks!

08-11-2011, 05:10 PM	#415 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	For those with this mod, any increase in engine noise over time? I'm talking those who have had them for atleast 6 months. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

08-11-2011, 06:27 PM	#416 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Kind of odd that we can get picture updates in the other thread, but can't get a response on here or from PMs... NST Still waiting on that belt, or at least a good word on when they'll be in stock/shipping... For those of you with these installed already, did you use the Gates K070786 Belt that comes from NST, or did you use the OEM one already on the car, and if you didn't use either of those, and got your own, What belt did you get and from Where?? __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14 Last edited by XwChriswX; 08-11-2011 at 07:10 PM.

08-11-2011, 08:28 PM	#419 (permalink)
quicksilver08 Base Member Join Date: Jul 2011 Location: Buda, Tx Posts: 66 Drives: 08 Infiniti G37s 6mt Rep Power: 13	I ordered my pulley's friday and got them wednesday. I didn't order the belt though. Gonna go pick it up from o'reilly's tomorrow. And the m&m's were freaking sweet. Thanks! __________________ 2008 Infiniti G37s 6mt coupe Berk HFC, Magnaflow Catback, JWT Popchargers, H&R, Eibach, Stillen Sways, B&M short throw, 4.08 frontier gears, NST pulleys

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 02:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 01:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 12:15 PM
Turbo-kits.com VQ37HR TT kit	nq23	Forced Induction	21	06-07-2009 12:25 PM
JWT Pop Chargers - Pictures - Review - Dyno	RCZ	Intake/Exhaust	31	03-30-2009 09:50 AM